QUALITU STANDARD MATERIAL NO. OLD DESIGNATION DC03 DIN EN 10130 1.0347 St 13-03 The deep drawing grade DC03 is specified according to the standard DIN EN 10130, which focuses on cold-rolled flat products made of soft steels for cold forming. This standard defines the technical requirements and test methods for cold-rolled products used in various industrial applications, particularly where high demands are placed on surface quality and mechanical properties. DC03 is a low-carbon steel characterized by excellent cold formability. The chemical composition of DC03 is precisely defined to ensure that the material has the required mechanical properties. Typically, DC03 contains a maximum of 0.10% carbon, a maximum of 0.45% manganese and traces of phosphorus and sulphur. This small amount of alloying elements contributes to the good formability and weldability of the steel. The mechanical properties of DC03 are also clearly defined. The material has a yield strength of at least 140 MPa and a tensile strength of between 270 and 370 MPa. In addition, DC03 has an elongation at break of at least 34%, which underlines its excellent formability. These properties make DC03 particularly suitable for the production of complex components that require high precision and surface quality, such as body parts in the automotive industry or household appliances. The DIN EN 10130 standard also specifies the tolerances for dimensions, shape and surface finish. These tolerances are crucial to ensure consistently high product quality and to meet the requirements of end users. The surface of the cold-rolled flat products can be supplied in various qualities, from matt to glossy, to meet the specific requirements of different applications. The DIN EN 10152 standard specifies electrolytically galvanized, cold-rolled flat steel products for cold forming, including the deep-drawing grade DC03. This standard defines the requirements for the zinc coating and the basic mechanical properties of the base material. DC03, when electrolytically galvanized in accordance with DIN EN 10152, is given an additional corrosion protection layer of zinc. This layer protects the material from oxidative influences and significantly increases the service life of the components made from it. The zinc coating can be applied in various thicknesses, depending on the specific requirements of the application. Typical coating thicknesses range from 5 to 20 µm. The chemical composition and mechanical properties of the base material DC03 remain unchanged after galvanizing and meet the requirements of DIN EN 10130. DC03 therefore retains its excellent cold formability and mechanical performance. The yield strength, tensile strength and elongation at break also remain in the same range as for ungalvanized DC03. In addition to mechanical performance, the quality of the zinc coating is of central importance. The DIN EN 10152 standard specifies the requirements for the uniformity of the coating, the adhesive strength of the zinc and the surface quality. These requirements ensure that the galvanized products offer high corrosion resistance and an aesthetically pleasing surface. The use of DC03 in accordance with DIN EN 10152 is widespread in the automotive industry, in the construction industry and in the manufacture of household appliances, where improved corrosion resistance is required in addition to high formability. Electrolytic galvanizing offers optimum protection here without impairing the excellent mechanical properties of the base material. In summary, it can be said that the deep-drawing grade DC03 offers a wide range of applications in accordance with both DIN EN 10130 and DIN EN 10152. While DIN EN 10130 focuses on high formability and surface quality, DIN EN 10152 supplements these properties with improved corrosion resistance thanks to the zinc coating. Both standards ensure that DC03 is a reliable and high-quality material for numerous industrial applications. Cold-rolled flat steel DC03, produced in accordance with the DIN EN 10130 and DIN EN 10152 standards, offers a number of advantages for applications in the cold forming process. While DIN EN 10130 defines the basic requirements for chemical composition, mechanical properties and surface quality, DIN EN 10152 extends these specifications to include specific conditions for electrolytically galvanized products that offer additional corrosion protection. Both standards together ensure that DC03 is a versatile material with high quality and durability.

Quality Standard Material No. Old designation DC01 DIN EN 10130 1.0330 ST 12-03 Cold-rolled flat steel DC01, according to the standards DIN EN 10130 and DIN EN 10152 Cold-rolled flat steel DC01 is a widely used material in the industrial sector, which is used for various applications in the cold forming process due to its excellent properties. The standards DIN EN 10130 and DIN EN 10152 are decisive for ensuring the quality and requirements of this material. DC01 according to the DIN EN 10130 standard The DIN EN 10130 standard defines the requirements for cold-rolled flat products made of unalloyed quality steels that are used in the cold forming process. Technical delivery conditions DIN EN 10130 specifies the technical delivery conditions for cold-rolled flat steel. These include the chemical composition, mechanical properties and surface quality. The standard ensures that the products supplied meet the required standards in order to guarantee workability and final quality. Chemical composition The chemical composition of the steel is decisive for its properties and is described in detail in DIN EN 10130. For DC01, the maximum carbon content is 0.12%, while the manganese and phosphorus content is also subject to specific limits. This composition ensures good cold formability and a high surface quality. Mechanical properties DC01 in accordance with DIN EN 10130 has specific mechanical properties that make it ideal for cold forming. These include a minimum tensile strength of 270-410 MPa and a minimum elongation of 28%. These properties allow the steel to be processed into complex shapes without cracking or breaking. Surface quality The surface quality is another aspect of DIN EN 10130. DC01 can be supplied in different surface finishes, such as smooth or matt. These variations allow adaptation to specific requirements of the end application, be it for decorative purposes or further coating processes. DC01+ZE according to the DIN EN 10152 standard The DIN EN 10152 standard extends the requirements of DIN EN 10130 to include specific conditions for electrolytically galvanized products. This standard is crucial for applications in which corrosion protection plays an important role. Technical delivery conditions DIN EN 10152 specifies the technical delivery conditions for electrolytically galvanized, cold-rolled flat products. In addition to the chemical composition and mechanical properties, these conditions also include the specific requirements for the zinc coating. Chemical composition and zinc coating The chemical composition of the base material DC01 generally remains unchanged, but an additional electrolytic zinc coating is applied. This coating is used for corrosion protection and varies in thickness depending on the specific requirements of the application. The standard provides detailed specifications for the thickness and uniformity of the zinc coating to ensure optimum protection. Mechanical properties Even with galvanized products, the mechanical properties of the base material are largely retained. The standard ensures that the cold formability and strength of the steel are not impaired despite the additional coating. Corrosion resistance and surface quality One of the main advantages of products manufactured in accordance with DIN EN 10152 is their improved corrosion resistance. Electrolytic galvanizing protects the steel from rust and thus increases the service life of the end product. The surface quality also plays a decisive role here and can be supplied in various finishes, such as smooth or textured. Conclusion Cold-rolled flat steel DC01, produced in accordance with the DIN EN 10130 and DIN EN 10152 standards, offers a number of advantages for applications in the cold forming process. While DIN EN 10130 defines the basic requirements for chemical composition, mechanical properties and surface quality, DIN EN 10152 extends these specifications to include specific conditions for electrolytically galvanized products that offer additional corrosion protection. Both standards together ensure that DC01 is a versatile material with high quality and durability. FOR EN 10130 DC01 CHEMICAL , MECHANICAL DATA SHEET KINDLY VISIT https://www.ladhanimetal.in/page/en-10130-2006-chemical-and-mechanical-composition/689c322d2e585e299cb43798 https://www.ladhanimetal.in/page/en-10130-cold-rolled-flat-sheet-plate-coil-data-sheet-equivalent-grade-and-chemical-and-mechanical-properties/68a45503fc14472bb274df32

Ladhani Metal Corporation offers SS 304L Boiler Half Round Tube Shields designed to protect straight boiler tubes from high-temperature erosion, oxidation, and mechanical impact. Manufactured from low-carbon austenitic stainless steel grade SS 304L, these shields provide superior corrosion resistance and improved weldability, making them ideal for applications where tubes are exposed to aggressive gases, thermal cycling, and post-weld environments. SS 304L minimizes the risk of intergranular corrosion and maintains mechanical strength in elevated temperatures. The shield features a precision-formed half-round profile that matches standard tube diameters for secure fitting and optimal protection. It serves as a physical barrier against soot blower blasts, high-velocity gas streams, and abrasive particulate matter, effectively extending the operational life of boiler tubes. Ladhani Metal Corporation manufactures, supplies, and exports SS 304L Boiler Half Round Tube Shields in a wide range of lengths, diameters, and thicknesses tailored to meet domestic and international boiler protection requirements. SS 304L Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 12.0% • Iron (Fe): Balance Applications: Designed for use in boilers, HRSGs, WHRBs, and industrial heat systems operating in corrosive and high-temperature environments. Uses • Protection of straight tubes in power and process boilers • Installed in radiant and convection zones exposed to flue gas • Shields against erosion from soot blowers and fly ash • Suitable for post-weld environments requiring low carbon stainless steel • Used in chemical, food, and pharmaceutical industries Features • Excellent corrosion resistance – Performs well in oxidizing and corrosive atmospheres • Low carbon content – Prevents carbide precipitation during welding • High thermal stability – Resists deformation under continuous heating • Custom-fit profile – Precisely formed for close contact and effective shielding • Easy installation – Clamping, welding, or banding as required • Export-ready – Manufactured to meet global quality and dimensional standards Applications • Power generation boilers – Protection for superheater and economizer tubes • Chemical and fertilizer plants – Corrosion-resistant shielding in heat zones • Food and dairy processing – Suitable for hygienic and thermally stable conditions • Waste heat recovery systems – Effective in high-temperature gas paths Conclusion The SS 304L Boiler Half Round Tube Shield from Ladhani Metal Corporation offers dependable protection for boiler tubes operating in corrosive, high-temperature environments. With enhanced corrosion resistance, superior weldability, and custom manufacturing options, these shields provide a long-lasting solution for industrial and utility boiler systems. For orders, sizing, or technical assistance, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Ladhani Metal Corporation offers top-grade SS 316 Outer Half Round 90 Degree Bend Tube Shields designed to provide robust protection to the outer curvature of U-bend and 90-degree return tubes in boilers, superheaters, heat exchangers, and waste heat recovery systems. Manufactured from austenitic stainless steel SS 316, these shields offer superior resistance to pitting, crevice corrosion, and chloride-induced attack, making them ideal for environments with aggressive chemical exposure and high-temperature steam. The shields feature a precisely contoured semi-cylindrical shape that wraps securely around the outer arc of curved tubes. This design creates a physical barrier against flue gas erosion, fly ash impingement, and thermal degradation. Ladhani Metal Corporation—an established manufacturer, supplier, and exporter—provides fully customizable SS 316 bend shields to suit a wide range of boiler and process equipment configurations. SS 316 Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Specifically suited for high-chloride and corrosive service conditions in boilers, HRSGs, WHRBs, and industrial heat exchangers. Uses • Protection of 90-degree bends and U-bends in superheaters and reheaters • Shields return tube arcs in marine boilers, HRSGs, and process steam systems • Ideal for corrosive environments in petrochemical, desalination, and coastal plants • Guards curved sections in heat exchangers, WHRBs, and flue gas circuits Features • Excellent corrosion resistance – Molybdenum enhances protection in chloride-laden atmospheres • High-temperature stability – Performs reliably under fluctuating thermal loads • Erosion resistance – Shields tube curves from ash erosion and gas flow impingement • Precision-formed – Engineered to match tube diameter and bend radius for accurate fit • Versatile installation – Can be tack welded, clamped, or banded securely • Custom options – Available in multiple wall thicknesses, lengths, and curvature specifications Applications • Thermal power plants – Used to shield U-bends in superheater and reheater coils • Chemical plants – Provides long-term protection in acidic or steam-rich environments • HRSGs and WHRBs – Prevents erosion in high-velocity flue gas areas • Marine and coastal installations – Resists corrosion from saltwater-laden air and gases Conclusion The SS 316 Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation offers durable, high-performance protection for boiler and exchanger tubes in harsh service conditions. Its superior corrosion resistance, thermal durability, and precision engineering make it a reliable choice for extending tube life and reducing unplanned outages. For custom sizing, material selection, or technical specifications, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Half Round Tube Shield Ladhani Metal Corporation manufactures 1Cr13 Half Round Straight Tube Shields to protect boiler and heat exchanger tubes from erosion, corrosion, and high-temperature wear. 1Cr13 is a martensitic stainless steel containing approximately 13% chromium, offering moderate corrosion resistance and high strength at elevated temperatures. It is suitable for service in mildly corrosive environments and where mechanical stress and abrasive flue gas contact are prevalent. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of 1Cr13 Half Round Straight Tube Shields, offering consistent quality and customized solutions for industrial thermal systems. Material Grade 1Cr13 – A martensitic stainless steel known for good mechanical strength and moderate corrosion resistance in dry, oxidizing conditions. Chemical Composition of 1Cr13 • Carbon (C): 0.15 – 0.20% • Silicon (Si): ≤ 0.60% • Manganese (Mn): ≤ 0.60% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 12.0 – 14.0% • Iron (Fe): Balance Applications: Recommended for erosion protection in boiler systems operating in dry flue gas or mildly corrosive service environments. Uses • Straight tube protection in industrial and utility boilers • Economizer and preheater shielding in thermal plants • Flue gas path erosion prevention in WHRBs • Wear-resistant layer in ash-prone ducting systems • Protective shielding in steam air heaters and gas coolers Features • Moderate corrosion and oxidation resistance at elevated temperatures • Good hardness and wear resistance under mechanical stress • Cost-effective solution for general tube protection • Customizable size and thickness to suit specific tube geometries • Compatible with banded, clamped, or welded installation methods • Increases tube durability and reduces operational downtime Applications • power generation – Economizer, LTSH, and convection section tube protection • pulp and paper – Shielding of tubes exposed to process gases • cement industry – Protection in preheater and kiln gas areas • food and textile industries – Used in clean gas heating systems • general boilers – Applied in tube banks subject to gas erosion Conclusion 1Cr13 Half Round Straight Tube Shields from Ladhani Metal Corporation deliver reliable mechanical and thermal protection for tubes in industrial heat systems. Their strength and wear resistance make them a practical choice for reducing maintenance costs and prolonging tube service life. To request a quote or custom configuration, contact Ladhani Metal Corporation. #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur

Half Round Tube Shield Ladhani Metal Corporation manufactures Cr25Ni20 Half Round Straight Tube Shields for use in high-temperature industrial environments where resistance to oxidation, carburization, and thermal fatigue is critical. Cr25Ni20 is a heat-resistant alloy with a high chromium (25%) and nickel (20%) content, offering excellent stability under prolonged exposure to high heat and corrosive flue gases. This alloy is widely used in boilers, reformers, waste heat recovery systems, and thermal process units. Cr25Ni20 Half Round Straight Tube Shield The Cr25Ni20 Half Round Straight Tube Shield is precisely shaped to fit the outer surface of straight heat exchanger or boiler tubes. It forms a durable, semi-cylindrical layer of protection against high-temperature scaling, tube thinning, and erosion caused by particulate-laden flue gas. The shield enhances tube longevity in radiation zones and areas prone to direct flame or high-velocity gas flow. Its excellent thermal shock resistance also makes it suitable for cyclic heating and cooling conditions. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of Cr25Ni20 Half Round Straight Tube Shields, delivering robust thermal shielding solutions for critical tube protection. Material Grade Cr25Ni20 – High chromium-nickel heat-resistant alloy Chemical Composition of Cr25Ni20 • Carbon (C): ≤ 0.08% • Silicon (Si): ≤ 1.5% • Manganese (Mn): ≤ 2.0% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Uses • Protection of boiler tubes in radiant and convection zones • Straight tube shielding in reformers and furnace outlets • High-temperature air and gas heater shielding • Application in coal gasification and petrochemical furnaces • Tube erosion prevention in thermal incineration units Features • Excellent high-temperature performance – Operates reliably above 1000°C • Resistant to oxidation and scale – Maintains surface integrity in oxidizing environments • Superior creep strength – Suitable for long-term service under thermal stress • Effective in carburizing atmospheres – Ideal for furnaces and gas reactors • Thermal fatigue resistance – Withstands repeated heating and cooling cycles • Custom fabrication – Available in multiple lengths, thicknesses, and diameters Applications • power generation boilers – Radiant zone tube protection • thermal cracking units – Resistant to flame impingement and high gas velocity • waste heat recovery boilers – Prolongs tube life in high-ash flue gas areas • fertilizer plants – Used in ammonia reformer tube protection • metallurgical furnaces – Shields exposed tubes in extreme temperature cycles Conclusion Cr25Ni20 Half Round Straight Tube Shields from Ladhani Metal Corporation offer outstanding durability and heat resistance, making them ideal for straight tubes operating in the most demanding high-temperature applications. Their high chromium and nickel content ensures reliable service where oxidation, erosion, and thermal cycling are a concern. For custom sizes, specifications, or technical consultations, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield

Half Round Tube Shield Ladhani Metal Corporation manufactures SS 430 Half Round Straight Tube Shields to provide cost-effective protection for straight boiler and heat exchanger tubes in mildly corrosive and oxidizing environments. SS 430 is a ferritic stainless steel known for its good resistance to oxidation, thermal fatigue, and moderate corrosion in non-aggressive media. These shields are ideal for shielding tubes exposed to dry flue gases, ash, and scale buildup. SS 430 Half Round Straight Tube Shield The SS 430 Half Round Straight Tube Shield is designed to fit snugly over the exterior surface of straight tubes, forming a physical barrier that resists thermal cycling, soot-blowing erosion, and mechanical wear. With its high chromium content, SS 430 provides enhanced resistance to scaling at elevated temperatures. It is commonly used in power plants, economizers, WHRBs, and industrial boilers where consistent performance and affordability are important. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 430 Half Round Straight Tube Shields, offering practical shielding solutions to extend the life of tubes in thermal and process equipment. Material Grade SS 430 – Ferritic stainless steel with good oxidation resistance and moderate corrosion protection in non-chloride environments. Chemical Composition of SS 430 • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Iron (Fe): Balance Applications: Suitable for dry, clean flue gas zones and mildly corrosive environments with minimal exposure to chlorides or strong acids. Uses • Straight tube shielding in boiler flue gas paths • Protection in economizers and preheater sections • Used in WHRBs for dry particulate erosion prevention • Ideal for food, paper, and textile industries with clean gas flow • Applied in low-to-moderate temperature furnace and duct systems Features • Good oxidation resistance – Performs well in clean, dry heat environments • Cost-efficient – Affordable solution for basic erosion protection • Magnetic ferritic grade – Offers dimensional stability under temperature cycling • Resistant to scaling – Up to ~815°C in intermittent service • Customizable – Lengths, radius, and thickness tailored to project needs • Easy attachment – Suitable for weld-on, clamp-on, or banded installation Applications • thermal boilers – Low-cost shielding for tubes in flue passages • process heat exchangers – Protects tubes in moderately aggressive environments • industrial dryers and ovens – Used in clean-air heating systems • WHRBs – Economical shield in clean-burning furnaces • general steam systems – Prevents tube wear and extends service life Conclusion SS 430 Half Round Straight Tube Shields by Ladhani Metal Corporation are a durable and economical choice for protecting straight tubes from heat, scale, and dry flue gas abrasion. With its balance of thermal resistance and cost-effectiveness, it serves reliably across a wide range of industrial systems. For custom configurations and bulk orders, contact Ladhani Metal Corporation.

Half Round Tube Shield Ladhani Metal Corporation manufactures SS 420 Half Round Straight Tube Shields to provide strong, wear-resistant protection for straight tubes in boilers, economizers, heat exchangers, and steam systems. SS 420 is a high-carbon martensitic stainless steel known for its excellent hardness, high mechanical strength, and moderate corrosion resistance. These shields are ideal for environments involving particulate abrasion, dry flue gas flow, and mechanical wear. SS 420 Half Round Straight Tube Shield The SS 420 Half Round Straight Tube Shield is designed to cover the outer surface of straight tubes, forming a protective barrier that resists thermal shock, erosion, and oxidizing conditions. With a high carbon content, SS 420 offers improved hardness after heat treatment, making it suitable for applications requiring resistance to physical impact and abrasive wear. These shields are used in power generation, cement plants, petrochemical industries, and WHRB systems. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 420 Half Round Straight Tube Shields, offering durable protection solutions for straight tubing under abrasive and high-stress conditions. Material Grade SS 420 – High-carbon martensitic stainless steel known for wear resistance, high strength, and fair corrosion resistance in dry or mildly corrosive atmospheres. Chemical Composition of SS 420 • Carbon (C): 0.15% max • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Iron (Fe): Balance Applications: Used in areas exposed to ash erosion, dry high-velocity gases, and mechanical wear in thermal power and process industries. Uses • Protecting straight boiler tubes from fly ash and abrasive gas flow • Economizer and WHRB tube shielding in dusty, dry flue environments • Cement kiln waste heat boilers where high mechanical strength is needed • Process gas heating systems with dry or oxidizing exhaust • Steam pipelines in refining, sugar, and fertilizer units Features • Excellent wear resistance – High hardness for abrasive service • Heat treatable – Strength can be enhanced for specific applications • Moderate corrosion resistance – Performs well in dry gas systems • High strength – Suitable for high-pressure and mechanical load zones • Versatile design – Custom-manufactured for various tube diameters • Easy installation – Weld-on, clamp-on, and banded fixing options available Applications • power and utility boilers – Erosion protection in ash-laden flue paths • cement and lime plants – High-wear zones in preheaters and kilns • WHRBs – In systems recovering waste heat from industrial furnaces • steam generation systems – Protects steam tubes in dry environments • mechanical process systems – Applied where strength and surface hardness are critical Conclusion The SS 420 Half Round Straight Tube Shield from Ladhani Metal Corporation delivers strong mechanical protection and enhanced resistance to wear and erosion in dry, high-velocity, and abrasive environments. Its durability and strength make it an effective solution for extending tube service life in aggressive operating conditions. For dimensional customization and technical assistance, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer

Half Round Tube Shield Ladhani Metal Corporation manufactures SS 410 Half Round Straight Tube Shields to offer cost-effective protection for boiler and heat exchanger tubes in moderate temperature and corrosive environments. SS 410 is a martensitic stainless steel that provides good corrosion resistance, mechanical strength, and wear resistance, making it suitable for shielding straight tubes exposed to flue gas erosion, ash deposits, and mild chemical exposure. SS 410 Half Round Straight Tube Shield The SS 410 Half Round Straight Tube Shield is designed to fit over the external surface of straight tubes, acting as a barrier against abrasive particles, high-velocity flue gases, and mechanical wear. It is widely used in power plants, waste heat recovery systems, and steam processing units where cost-effective protection is needed for tubes operating at medium temperatures. The material offers ease of fabrication and reliable resistance to oxidation up to 650°C. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 410 Half Round Straight Tube Shields, delivering durable thermal protection for industrial piping systems. Material Grade SS 410 – Martensitic stainless steel known for its hardness, oxidation resistance, and moderate corrosion protection. Chemical Composition of SS 410 • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Iron (Fe): Balance Applications: Suitable for environments involving dry flue gases, fly ash, and light acidic fumes; commonly used in economizers and low-temperature steam sections. Uses • Straight tube protection in boilers and economizers • Installed in air preheaters and low-temperature superheaters • Applied in WHRBs to guard tubes from ash and erosion • Used in industrial steam systems with mild corrosion risk • Shields tubes in pulp, paper, and food processing units Features • Good oxidation resistance – Up to moderate temperatures (~650°C) • High hardness – Offers resistance against flue gas abrasion and ash impact • Cost-effective – Economical choice for medium-duty service • Easy to fabricate and weld – Suitable for various attachment methods • Customizable – Available in different sizes, lengths, and thicknesses • Enhances tube durability – Reduces wear and minimizes shutdowns Applications • thermal power plants – Used in low-heat sections for erosion protection • steam processing – Protects steam-carrying tubes from scale and impact • waste heat recovery units – Resists abrasive exhaust gases and particulate matter • cement and steel plants – Applied in dust-prone, dry gas environments • food and chemical industries – Suitable for non-aggressive process gas shielding Conclusion The SS 410 Half Round Straight Tube Shield from Ladhani Metal Corporation is a practical and robust solution for extending the life of tubes operating under dry, abrasive, and moderately corrosive service conditions. Its hardness and heat resistance make it ideal for protecting straight tube sections in a wide range of industrial systems. For standard and custom configurations, contact Ladhani Metal Corporation for technical consultation and orders.