Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +919029362692 (International callers) or +919029362692 (Indian callers).
Product name: Gr1 Titanium seamless tube
Standard:ASTM B338
Material:Grade 1 titanium
Diameter:5-914mm
Wall thickness:0.5-10mm
Length:Max 16000mm
Surface:Pickling surface/Polished
Type:Seamless, welded
Application:Heat Exchanger, chemical industry etc.
Technique:Rolled
Gr1 Titanium seamless tube
The production process of titanium seamless pipe is complex. Three roll or multi roll rolling mill and drawing machine are usually used to roll or draw a certain specification of pipe blank through multiple passes, and finally produce seamless pipe after reducing diameter and wall. The production efficiency and yield of this process are low. Titanium seamless pipe from sponge titanium to pipe, through rolling or drawing, the material waste is large, the yield is only about 50%, and can not achieve mass production, and the production cycle is relatively long.
Product name Titanium seamless tube
Standard ASTM B861, ASTM B337, ASTM B338
Size
OD5.0-114.0mmxWT0.5-7.0mmx1000-12000mm
OD55mm-914mmxWT1.0-10.0mmx1000-6000mm
Or according customer’s requirement.
Material
Titanium(Gr1, Gr2, Gr5, Gr7,Gr9,GR12)
Technique Rolled
Status Annealled
Surface Acid wash,bright
Application
Exhaust pipe; exhaust pipe, petroleum pipeline;Sea farming; electroplating equipment;Fluid Transportation Piping etc.
Certificate
ISO9001:2008, TUV, EN10204.3.1
Types Out diameter Sizes Length
NB Sizes (in stock) .0035” ~ 8” 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1.25", 1.5", 2", 2.5", 3", 4", 5", 6" Cut to length
Titanium Seamless Tube (Custom Sizes) 6.35 mm OD To 101.6 mm OD As per requirement Cut to length
Titanium seamless pipe features:
1. The thicker the wall thickness is, the more economical and practical it is. The thinner the wall thickness is, the higher its processing cost will be
2. The process of titanium seamless pipe determines its limited performance. Generally, the precision of seamless steel pipe is low, the wall thickness is uneven, the brightness of the inner and outer surface of the pipe is low, the sizing cost is high, and there are pockmarks and black spots on the inner and outer surface, which are not easy to remove
3. Its detection and shaping must be processed offline. Therefore, it embodies its advantages in high pressure, high strength and mechanical structure materials.
Product name: Grade 7 titanium tubes
Standard:ASTM B338 ASTM B861 ASTM B862
Material:Titanium Gr7
Diameter:5-914mm
Wall thickness:0.5-10mm
Length:Max 16000mm
Surface:Pickling surface/Polished
Type:Seamless, welded
Application:Heat Exchanger, chemical industry etc.
Technique:Rolled
Grade 7 Titanium Tubes
Product name: Grade 7 titanium tubes
Standard:ASTM B338 ASTM B861 ASTM B862
Material:Titanium Gr7
Diameter:5-914mm
Wall thickness:0.5-10mm
Length:Max 16000mm
Surface:Pickling surface/Polished
Type:Seamless, welded
Application:Heat Exchanger, chemical industry etc.
Technique:Rolled
Dimension and Tolerance of titanium tube
Outside diameter,
in.(mm)
Diameter tolerance,
in.(mm)
Permissible variations , wall thinckness,
t, % in.(mm)
<1 (25.4) ±0.004( ± 0.012) ±10
1-1½(25.4-38.1) ±0.005( ±0.127 ) ±10
1½-2(38.1-50.8) ±0.006( ± 0.152) ±10
2-2½(50.8-63.5) ±0.007( ± 0.178) ±10
2½-3½(63.5-88.9) ±0.010( ± 0.254) ±10
Grade 7 (Ti-0.2Pd) titanium tube
Chemical compositions(weight%,<=)
Pd
Al
V
Fe
C
0.12-0.25
----
----
0.30
0.08
N
H
O
Other(total)
Ti
0.05
0.015
0.2
0.4
Remainder
Physical properties(>=)
Σb
Tensile Strength
(Mpa)
σr0.2
Yield Strength
(Mpa)
δL0+50mm
Elongation
(%)
ψ
Reduction of area
(%)
370
250
20
25
The density of titanium alloy is generally about 4.51g/ cubic centimeter, only 60 of steel, the strength of pure titanium is close to the strength of ordinary steel, some high strength titanium alloy exceeds the strength of many alloy structural steel. Therefore, the specific strength (strength/density) of titanium alloy is much higher than that of other metal structural materials, as shown in Table 7-1. It can produce components with high unit strength, good rigidity and light weight. At present, titanium alloy is used for engine components, skeleton, skin, fasteners and landing gear.
High thermal strength
The use temperature is several hundred degrees higher than aluminum alloy, can still maintain the required strength at moderate temperature, can work for a long time at 450500 temperature these two titanium alloys still have high specific strength in the range of 150500, and aluminum alloy at 150 than the strength decreased significantly. Titanium alloys operate at temperatures up to 500, while aluminum alloys operate below 200.
Good resistance to corrosion
The corrosion resistance of titanium alloy is much better than that of stainless steel when working in humid atmosphere and seawater medium. Resistance to pitting corrosion, acid corrosion, stress corrosion is particularly strong; Excellent corrosion resistance to alkali, chloride, chlorine organic articles, nitric acid, sulfuric acid and so on. But titanium has poor corrosion resistance to reducing oxygen and chromite medium.
Good low temperature performance
Titanium alloy can keep its mechanical properties at low temperature and ultra low temperature. Titanium alloys with good low temperature performance and very low gap elements, such as TA7, can maintain certain plasticity at -253. Therefore, titanium alloy is also an important low temperature structural material.
Product Name:Titanium Jigs for coating
Material: Gr1, Gr2
Size: Customized
Surface: Polished
Titanium jigs for plating
Any project to anodize requires a reliable hanger/jig/rack, first to prevent it from falling to the bottom of the anodizing tank, and second to allow the current to be safely transferred from the jig to the workpiece. Anodic oxidation clamps are usually made of aluminum or titanium. Aluminum fixtures must of course be anodized and must be chemically stripped. Continuous anodizing and stripping can result in short service life, so there is no need to strip titanium after the anodizing process.
Item Name: titanium jig for coating
Size:Customized size is welcomed
Material: Titanium Gr1, Gr2
Surface:Sand Blasting, Acid Washing
Parameter:Current density≤2000A/M2
Temperature:<65°C
PH: 0.1~14
Max content of Fluoride ion is 200PPM