DIN 2627 Carbon Steel flanges PN 400 are high-strength blind flanges designed for use in high-pressure applications across a wide range of industrial systems. Manufactured in accordance with the DIN 2627 standard, these flanges are primarily used to isolate piping systems by sealing off the end of a pipeline or vessel opening. The PN 400 pressure rating (400 bar / 5800 psi) ensures reliable performance under intense pressure and mechanical stress. Carbon steel flanges offer excellent tensile strength, impact resistance, and structural integrity, making them a cost-effective solution for systems where corrosion resistance is not the primary concern. Typically used in applications involving water, steam, oil, and gas, DIN 2627 carbon steel blind flanges are well-suited for power plants, refineries, petrochemical facilities, and general industrial systems. Ladhani Metal Corporation is a trusted global manufacturer and exporter of carbon steel flanges, producing components that meet rigorous international standards for material quality, dimensional accuracy, and pressure containment. Pressure Rating: • PN 400 (400 bar / 5800 psi): Suitable for extremely high-pressure systems in industrial pipelines and mechanical installations. Flange Type: • Blind Flanges Solid, non-bored flanges used to terminate flow or provide system isolation. Commonly used for pressure testing, maintenance access, and future expansion. • Flat Face (FF) Flanges Flat sealing surfaces designed for use with full-face gaskets and flat-faced mating flanges. Promotes even bolt loading and effective sealing under high-pressure conditions. Carbon Steel Grades and Composition: ASTM A105 (Forged Carbon Steel) • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Commonly used for high-temperature and high-pressure systems. Ideal for oil and gas, steam, and hydraulic systems. ASTM A350 LF2 (Low-Temperature Carbon Steel) • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Silicon (Si): 0.15 – 0.30% • Nickel (Ni): ≤ 1.0% Applications: Suitable for sub-zero temperature services such as cryogenic systems, LNG processing, and cold-weather pipelines. Applications of DIN 2627 Carbon Steel Flanges PN 400: • Oil and Gas Transmission Lines Used in pipeline systems and refineries handling hydrocarbons under high pressure. • Steam and Power Generation Plants Ideal for high-pressure steam lines, condensate systems, and boiler feedwater applications. • Petrochemical and Chemical Industries Suitable for handling neutral and non-aggressive chemical fluids and process gases. • Water Treatment and Pumping Stations Used in high-pressure water systems, including pumping stations, pressure regulators, and testing units. • Heating, Ventilation, and Air Conditioning (HVAC) Employed in high-pressure chilled water and steam systems for industrial facilities. • General Manufacturing and Engineering Systems Reliable for structural piping systems in factories and mechanical installations. Key Features: • Compliant with DIN 2627 specifications • PN 400 pressure rating for ultra-high-pressure systems • Blind flange design allows for system isolation and pressure containment • Flat face design compatible with full-face gaskets and flat mating surfaces • Manufactured from forged carbon steels like ASTM A105 and A350 LF2 • Excellent strength, ductility, and impact resistance • Economical and durable for non-corrosive environments • Widely used across oil and gas, power, chemical, and water treatment sectors • Custom sizes, pressure classes, surface coatings, and face types available upon request Conclusion: DIN 2627 Carbon Steel Flanges PN 400 from Ladhani Metal Corporation are engineered for high-performance applications requiring strength, pressure retention, and reliability in demanding industrial environments. Whether used in power plants, oil pipelines, or steam systems, these flanges provide durable and cost-effective sealing for critical operations. Contact Ladhani Metal Corporation for product specifications, technical support, or custom solutions tailored to your piping system requirements.

DIN 2627 Monel flanges PN 400 are high-performance blind flanges crafted for ultra-high-pressure systems where superior corrosion resistance, durability, and structural integrity are critical. Compliant with the DIN 2627 standard, these flanges are specifically designed to close off the ends of pipelines in extreme service environments, including highly corrosive marine atmospheres, acidic and alkaline chemical processes, and high-temperature applications. With a PN 400 rating (400 bar / 5800 psi), these flanges ensure leak-free operation under intense pressure and challenging conditions. Made from Monel alloys—primarily Monel 400 and Monel K500—these flanges are widely utilized in offshore oil rigs, naval applications, chemical processing, and power generation systems. Ladhani Metal Corporation is a global leader in manufacturing and exporting DIN-standard Monel flanges, ensuring compliance with international requirements for pressure containment, corrosion resistance, and metallurgical consistency. Pressure Rating: • PN 400 (400 bar / 5800 psi): Engineered for extremely high-pressure piping systems in critical and hazardous service environments where reliable sealing is essential. Flange Type: • Blind Flanges Solid, non-bored flanges used to seal piping systems or terminate flow paths. Ideal for pressure testing, system isolation, and future expansion. • Flat Face (FF) Flanges Designed with a flat sealing surface for use with full-face gaskets and flat mating components. Ensures uniform load distribution and optimal sealing performance. Monel Grades and Composition: Monel 400 (UNS N04400) • Nickel (Ni): ≥ 63% • Copper (Cu): 28 – 34% • Iron (Fe): ≤ 2.5% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% Applications: Outstanding resistance to seawater, hydrofluoric acid, alkalis, and other corrosive media. Widely used in marine equipment, chemical processing, and heat exchangers. Monel K500 (UNS N05500) • Nickel (Ni): ≥ 63% • Copper (Cu): 27 – 33% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2% • Carbon (C): ≤ 0.25% Applications: Combines the corrosion resistance of Monel 400 with enhanced strength and hardness. Suitable for high-stress components like shafts, valve parts, and pump systems in corrosive environments. Applications of DIN 2627 Monel Flanges PN 400: • Offshore Oil and Gas Platforms Ideal for subsea systems exposed to high salinity, pressure, and corrosive gases such as hydrogen sulfide. • Marine and Shipbuilding Preferred in piping systems, ballast lines, and propulsion equipment exposed to seawater and biofouling agents. • Chemical and Petrochemical Plants Used in process systems handling caustic solutions, hydrofluoric acid, and strong alkalis at elevated pressures. • Heat Exchangers and Condensers Excellent thermal conductivity and corrosion resistance make Monel suitable for harsh thermal cycling conditions. • Nuclear and Power Generation Resilient in high-radiation and chemical-laden environments found in cooling systems and high-pressure steam lines. • Aerospace and Defense Used in fuel and hydraulic lines where strength and resistance to high-pressure corrosive media are critical. Key Features: • Manufactured according to DIN 2627 standards • Rated for PN 400 high-pressure operations • Blind flange design ensures reliable sealing and flow isolation • Flat face configuration for full-face gasket compatibility • Available in Monel 400 and Monel K500 grades • Exceptional resistance to corrosion by seawater, acids, and alkalis • High strength and durability in extreme service environments • Widely used in marine, chemical, nuclear, oil and gas, and aerospace industries • Custom configurations, sizes, and material options available on request Conclusion: DIN 2627 Monel Flanges PN 400 from Ladhani Metal Corporation are engineered for mission-critical applications where long-term durability, corrosion resistance, and high-pressure performance are mandatory. Whether you need protection against seawater, alkalis, or aggressive process chemicals, these flanges provide robust, leak-free service in the harshest operating environments. Contact Ladhani Metal Corporation for expert guidance, custom engineering, and dependable supply of Monel flange solutions tailored to your specific needs

DIN 2627 Inconel flanges PN 400 are premium-grade blind flanges engineered for ultra-high-pressure applications requiring exceptional corrosion resistance, heat resistance, and mechanical strength. Manufactured in accordance with the DIN 2627 standard, these flanges are designed to seal off the ends of piping systems, especially in extreme environments involving high temperatures, aggressive chemicals, or seawater exposure. The PN 400 rating (400 bar / 5800 psi) ensures performance under intense pressure conditions. Produced using high-performance nickel-based alloys such as Inconel 600, Inconel 625, and Inconel 718, these flanges are used extensively in aerospace, chemical processing, offshore oil and gas, marine, and power generation industries. Ladhani Metal Corporation is a leading global manufacturer and exporter of Inconel flanges, supplying components that conform to international standards for material integrity, pressure containment, and corrosion resistance. Pressure Rating: • PN 400 (400 bar / 5800 psi): Suitable for high-pressure piping systems in critical applications where maximum sealing and durability are essential. Flange Type: • Blind Flanges Solid, non-bored flanges used to isolate piping systems or terminate flow. Ideal for pressure testing, maintenance, and future pipeline expansions. • Flat Face (FF) Flanges Designed with a flat sealing surface for use with full-face gaskets and flat mating components, ensuring even load distribution and effective sealing. Inconel Grades and Composition: Inconel 600 (UNS N06600) • Nickel (Ni): ≥ 72% • Chromium (Cr): 14 – 17% • Iron (Fe): 6 – 10% • Manganese (Mn): ≤ 1% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.15% • Sulfur (S): ≤ 0.015% Applications: Excellent resistance to oxidation, carburization, and chloride-ion stress corrosion cracking. Used in furnace components, heat exchangers, and food processing equipment. Inconel 625 (UNS N06625) • Nickel (Ni): ≥ 58% • Chromium (Cr): 20 – 23% • Molybdenum (Mo): 8 – 10% • Niobium + Tantalum (Nb + Ta): 3.15 – 4.15% • Iron (Fe): ≤ 5% • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 0.5% • Silicon (Si): ≤ 0.5% Applications: Outstanding corrosion and fatigue resistance in seawater and chemical environments. Common in marine, aerospace, and offshore industries. Inconel 718 (UNS N07718) • Nickel (Ni): 50 – 55% • Chromium (Cr): 17 – 21% • Iron (Fe): Balance • Niobium + Tantalum (Nb + Ta): 4.75 – 5.5% • Molybdenum (Mo): 2.8 – 3.3% • Titanium (Ti): 0.65 – 1.15% • Aluminum (Al): 0.2 – 0.8% Applications: High strength and oxidation resistance up to 700°C. Used in jet engines, gas turbines, and high-pressure valves. Applications of DIN 2627 Inconel Flanges PN 400: • Offshore Oil and Gas Platforms Withstands high-pressure, high-salinity, and corrosive environments in subsea pipelines and risers. • Chemical Processing Plants Ideal for systems handling oxidizers, acids, solvents, and reactive compounds at high temperatures and pressures. • Aerospace and Jet Propulsion Used in fuel systems, hydraulic lines, and turbine enclosures where extreme heat and stress are common. • Nuclear and Power Generation Suited for high-pressure reactor lines and heat exchanger systems exposed to radiation, heat, and corrosive media. • Desalination and Seawater Systems Highly resistant to chloride-induced pitting and crevice corrosion. • High-Temperature and Reactive Media Systems Perfect for isolating systems exposed to thermal cycling and chemical attack. Key Features: • Manufactured to DIN 2627 standards • Rated for PN 400 ultra-high-pressure systems • Blind flange design for sealing pipe ends or testing access • Flat face design for even gasket compression and sealing • Available in Inconel 600, 625, and 718 • Excellent resistance to oxidation, acids, chlorides, and high heat • High mechanical strength and fatigue resistance • Used in critical industries including aerospace, marine, oil and gas, and chemical processing • Custom sizes, alloys, pressure ratings, and surface finishes available on request Conclusion: DIN 2627 Inconel Flanges PN 400 from Ladhani Metal Corporation offer exceptional performance and reliability in the most demanding service conditions. Whether your system involves corrosive chemicals, high-pressure steam, or marine exposure, these blind flanges deliver secure sealing, longevity, and safety. Contact Ladhani Metal Corporation for material selection, technical support, or custom solutions tailored to your high-performance application.

DIN 2627 Titanium Flanges PN 400 are high-integrity blind flanges manufactured from corrosion-resistant titanium alloys, engineered for extreme pressure applications. These flanges conform to the DIN 2627 standard and are specifically designed to close the end of a piping system, providing a reliable, leak-tight seal. With a pressure rating of PN 400 (400 bar / 5800 psi), these titanium blind flanges are ideal for high-pressure systems operating in chemically aggressive or high-temperature environments. Ladhani Metal Corporation is a globally recognized manufacturer and exporter of titanium flanges, offering top-quality components that comply with stringent international specifications. The DIN 2627 PN 400 titanium flanges are especially suited for high-demand sectors where superior material performance is essential under extreme mechanical and corrosive conditions. Pressure Rating: • PN 400 (400 bar / 5800 psi): Designed for ultra-high-pressure systems requiring secure isolation and sealing. These flanges ensure operational safety and long-term durability in critical gas, fluid, or chemical applications. Flange Type: • Blind Flanges These solid disk flanges are used to terminate the flow in a pipeline or vessel and can be easily removed for inspection or system modification. They are essential in high-pressure systems for ensuring tight sealing without any flow path. • Flat Face (FF) Flanges Utilized with full-face gaskets and flat mating surfaces, flat face blind flanges distribute bolt load evenly to prevent flange deformation, particularly when paired with brittle or non-metallic components. Titanium Grades and Composition: Titanium Grade 2 (UNS R50400) Composition: • Titanium (Ti): ≥ 98.5% • Trace Elements: Iron (Fe), Oxygen (O), Carbon (C), Nitrogen (N), Hydrogen (H) Applications: Grade 2 titanium offers excellent corrosion resistance, good ductility, and weldability, making it suitable for high-pressure chemical processing, marine systems, and water treatment environments. Titanium Grade 5 (Ti-6Al-4V, UNS R56400) Composition: • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% Applications: Grade 5 titanium delivers superior tensile strength and resistance to fatigue, high temperatures, and corrosion. It is the preferred material for aerospace, defense, offshore drilling, and pressurized chemical applications requiring durability under extreme conditions. Applications of DIN 2627 Titanium Flanges PN 400: • High-Pressure Chemical and Petrochemical Systems Used to terminate pipelines in systems transporting reactive or corrosive chemicals under high pressure. • Offshore Oil and Gas Platforms Ideal for sealing high-pressure flowlines and isolation points exposed to seawater and mechanical stress. • Aerospace Hydraulic and Fuel Systems Applied in high-performance systems requiring lightweight, pressure-resistant sealing. • Marine Engineering and Subsea Installations Deployed in subsea structures and marine piping where both high pressure and chloride-induced corrosion are concerns. • Nuclear and Power Generation Suited for extreme environments involving radioactive, corrosive, or high-temperature media. • Industrial Process Systems Used in closed-loop systems, autoclaves, reactors, and high-pressure vessels. Key Features: • Manufactured according to DIN 2627 specifications • PN 400 pressure rating for ultra-high-pressure environments • Exceptional corrosion resistance in seawater and chemical exposure • Titanium Grade 2 and Grade 5 options for specific strength and application needs • Blind flange design for secure system termination • Flat face flanges ensure optimal gasket compatibility and load balance • High strength-to-weight ratio and long service life • Suitable for offshore, aerospace, chemical, and power industries • Custom configurations, sizes, and finishes available upon request Conclusion: DIN 2627 Titanium Flanges PN 400 by Ladhani Metal Corporation are engineered to meet the highest standards of performance in ultra-high-pressure systems. Whether in offshore drilling, aerospace, or advanced chemical processes, these flanges offer unmatched reliability, corrosion resistance, and structural integrity. Contact Ladhani Metal Corporation for technical guidance, material selection, or customized solutions for your specific project needs.

DIN 2576 Carbon Steel Flanges PN 10 are slip-on type flanges manufactured in accordance with the DIN 2576 standard, suitable for piping systems operating under low to moderate pressures. Made from high-quality carbon steel, these flanges offer good mechanical strength and are cost-effective solutions for a wide range of industrial applications where corrosion resistance is not the primary concern. The slip-on design allows easy fitting over the pipe and facilitates welding on both the inner and outer edges, ensuring reliable and leak-proof connections. Ladhani Metal Corporation is a reputed manufacturer and global supplier of carbon steel flanges, delivering components that comply with international quality and dimensional standards. DIN 2576 carbon steel flanges are widely used in general-purpose piping systems across industries such as oil and gas, power generation, HVAC, water treatment, and process industries. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for use in low to medium pressure systems with stable operational demands. Flange Types: • Slip-On Flanges These flanges slide over the pipe end and are welded on both sides, allowing for simple installation and strong mechanical joints. • Flat Face (FF) Flanges Designed to mate with flat gaskets and flat surfaces, suitable for systems involving cast iron or non-metallic components. Carbon Steel Grades and Composition: Common Grades: • ASTM A105 (Forged Carbon Steel) • ASTM A516 Grade 70 (Pressure Vessel Quality Steel) • IS 2062 (Structural Carbon Steel) Typical Composition (ASTM A105): • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% Applications: DIN 2576 carbon steel flanges are preferred in systems where high strength is required and the risk of corrosion is minimal or controlled through external protection (e.g., coatings or linings). Common applications include: • Oil and Gas Transmission Used in pipelines and flowlines where moderate pressures are involved. • Power Plants Suitable for steam, water, and air systems in thermal and hydroelectric power stations. • Water Treatment and Distribution Employed in clean water and wastewater systems, including pumping stations and storage tanks. • HVAC Systems Utilized in heating, ventilation, and air conditioning ducting and piping. • Chemical and Petrochemical Applied in non-corrosive fluid handling and auxiliary systems. • Structural and Fabrication Works Used in non-pressure retaining structural supports and frames. Key Features: • Manufactured to DIN 2576 standards • PN 10 pressure rating for medium-duty applications • Cost-effective and mechanically strong • Available in a variety of carbon steel grades • Slip-on design offers ease of installation and alignment • Flat face design compatible with flat gaskets and soft materials • Ideal for industrial sectors with controlled or minimal corrosion environments • Custom drilling, dimensions, and surface treatments available Conclusion: DIN 2576 Carbon Steel Flanges PN 10 by Ladhani Metal Corporation offer a practical and economical solution for low to moderate pressure piping systems. With reliable performance, ease of installation, and availability in various carbon steel grades, these flanges are suited for a broad range of applications in power, water, oil and gas, and infrastructure industries. For detailed specifications, material compatibility, or project-based orders, contact Ladhani Metal Corporation today.

DIN 2576 Super Duplex Flanges PN 10 are high-performance, slip-on flanges manufactured from super duplex stainless steel, designed for piping systems operating under low to medium pressures. Produced in accordance with the DIN 2576 standard, these flanges offer exceptional mechanical strength combined with superior corrosion resistance, making them ideal for highly aggressive and chloride-laden environments. The slip-on design facilitates easy placement over the pipe and enables secure welding, ensuring precise alignment and a reliable seal across various industrial applications. Ladhani Metal Corporation is a trusted manufacturer and global supplier of super duplex steel flanges, providing products that meet stringent international standards in terms of dimensions, metallurgy, and performance. DIN 2576 super duplex flanges are especially valued in industries where resistance to pitting, crevice corrosion, and stress corrosion cracking is critical, including marine, chemical, and wastewater systems. Pressure Rating: • PN 10 (10 bar / 145 psi): Designed for moderate-pressure systems demanding long-term durability in corrosive environments. Flange Types: • Slip-On Flanges These flanges slide over the pipe and are welded on both sides, offering ease of installation and secure mechanical performance. • Flat Face (FF) Flanges Designed for use with flat gaskets and mating surfaces, these flanges are ideal for applications involving non-metallic or cast components. Super Duplex Stainless Steel Grades and Composition: Super Duplex 2507 (UNS S32750) Composition: • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 5.0% • Nitrogen (N): 0.24 – 0.32% • Iron (Fe): Balance Applications: Super Duplex 2507 delivers superior yield strength and corrosion resistance, particularly in extreme environments. It is commonly used in subsea equipment, chemical containment, high-pressure systems, and offshore platforms exposed to seawater and chlorides. Applications of DIN 2576 Super Duplex Flanges: • Offshore and Marine Engineering Well-suited for seawater cooling systems, risers, and structural elements exposed to marine conditions. • Chemical and Petrochemical Industries Ideal for conveying highly corrosive fluids, acids, and chlorides in reactors and pipelines. • Water Treatment and Desalination Applied in reverse osmosis systems, brine piping, and high-salinity water circuits requiring enhanced corrosion resistance. • Pulp and Paper Industry Offers protection against aggressive bleaching agents and chemical fluids under pressurized conditions. • Oil and Gas Used in critical systems like separators, manifolds, and sour gas applications. • Structural and Pressure Vessel Fabrication Preferred for tanks and pressure vessels operating under corrosive and mechanical stress. Key Features: • Fully compliant with DIN 2576 standard specifications • PN 10 pressure rating for use in moderate-pressure applications • Superior resistance to chloride-induced pitting, crevice corrosion, and stress corrosion cracking • High mechanical strength reduces material thickness and overall system weight • Manufactured using Super Duplex 2507 and other super duplex alloys • Slip-on design ensures straightforward alignment and welding • Flat face variants suitable for a wide range of gaskets and connection types • Widely used across marine, chemical, oil and gas, and water treatment sectors • Custom sizes, face configurations, and finishes available on request Conclusion: DIN 2576 Super Duplex Flanges PN 10 by Ladhani Metal Corporation offer exceptional strength and corrosion resistance for highly demanding industrial environments. Available in Super Duplex 2507 and other super duplex grades, these flanges ensure reliable performance in systems facing high salinity, pressure, and temperature. For technical guidance, grade selection, or customized project solutions, reach out to Ladhani Metal Corporation today.

DIN 2576 Duplex Flanges PN 10 are robust, slip-on flanges engineered from duplex stainless steel, designed for piping systems operating under low to medium pressures. Manufactured according to the DIN 2576 standard, these flanges combine high mechanical strength with excellent corrosion resistance, particularly in chloride-rich and aggressive chemical environments. The slip-on configuration allows for simple positioning over the pipe and secure welding, ensuring accurate alignment and strong sealing integrity in a variety of industrial applications. Ladhani Metal Corporation is a renowned manufacturer and global exporter of duplex steel flanges, offering products that conform to international specifications in terms of dimensions, metallurgy, and performance. DIN 2576 duplex flanges are especially valued in industries requiring resistance to pitting, crevice corrosion, and stress corrosion cracking, including offshore, chemical, and wastewater systems. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for moderate-pressure systems requiring long-term performance in harsh environments. Flange Types: • Slip-On Flanges Designed to slide over the pipe and be welded on both sides, these flanges offer easy installation and secure mechanical integrity. • Flat Face (FF) Flanges Used in conjunction with flat gaskets and flat mating surfaces, ideal for connections involving non-metallic or cast components. Duplex Stainless Steel Grades and Composition: Duplex 2205 (UNS S32205 / S31803) Composition: • Chromium (Cr): 21.0 – 23.0% • Nickel (Ni): 4.5 – 6.5% • Molybdenum (Mo): 2.5 – 3.5% • Nitrogen (N): 0.14 – 0.20% • Iron (Fe): Balance Applications: Duplex 2205 offers twice the yield strength of conventional stainless steels with superior resistance to chloride-induced corrosion. Common applications include chemical processing, desalination, marine systems, and structural components in offshore platforms. Applications of DIN 2576 Duplex Flanges: • Offshore and Marine Engineering Ideal for seawater cooling systems, risers, and structural supports exposed to harsh marine environments. • Chemical and Petrochemical Industries Used in systems handling aggressive acids, chlorides, and solvents where standard stainless steels are insufficient. • Water Treatment and Desalination Applied in brine systems, high-salinity piping, and reverse osmosis plants for their resistance to pitting and scaling. • Pulp and Paper Industry Resists corrosion from bleaching chemicals and process fluids under high pressure. • Oil and Gas Suitable for pressure control systems, separators, and sour service applications. • Structural and Pressure Vessel Fabrication Used in tanks, pressure vessels, and piping subjected to mechanical and corrosive stress. Key Features: • Compliant with DIN 2576 standards • PN 10 pressure rating for moderate-pressure use • Excellent resistance to chloride stress corrosion, pitting, and crevice corrosion • High strength-to-weight ratio, reducing component size and cost • Available in Duplex 2205, Super Duplex 2507, and other custom grades • Slip-on design ensures quick and accurate pipe connections • Flat face options compatible with a variety of gaskets and materials • Ideal for chemical, marine, oil and gas, and water treatment sectors • Custom dimensions, face types, and surface finishes available Conclusion: DIN 2576 Duplex Flanges PN 10 from Ladhani Metal Corporation provide outstanding durability and corrosion resistance for challenging industrial environments. With availability in Duplex 2205 and Super Duplex 2507, these flanges are a reliable solution for systems exposed to high chlorides, pressure, and temperature. For technical specifications, grade selection, or project-specific orders, contact Ladhani Metal Corporation today.

DIN 2576 Monel Flanges PN 10 are high-integrity, slip-on flanges manufactured from corrosion-resistant nickel-copper alloys, specifically designed for demanding low to medium-pressure applications. Compliant with the DIN 2576 standard, these flanges provide exceptional resistance to seawater, acids, alkalis, and corrosive chemicals, making them ideal for highly corrosive industrial environments. The slip-on design allows the flange to be positioned over the pipe and welded in place, ensuring precise alignment and long-term mechanical stability. Ladhani Metal Corporation is a trusted manufacturer and international supplier of Monel flanges, producing components that meet rigorous dimensional, metallurgical, and quality standards. DIN 2576 Monel flanges are widely used in marine, chemical, and oil and gas industries, where material durability and corrosion resistance are critical. Pressure Rating: • PN 10 (10 bar / 145 psi): Designed for systems requiring stable operation under moderate pressures in fluid and gas transport environments. Flange Types: • Slip-On Flanges Facilitate easy assembly by slipping over the pipe and welding on both sides to ensure a leak-proof and secure joint. • Flat Face (FF) Flanges Designed for use with flat gaskets and mating surfaces, offering even pressure distribution and sealing performance, particularly with brittle or non-metallic materials. Monel Grades and Composition: Monel 400 (UNS N04400) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe), Manganese (Mn), Silicon (Si), Carbon (C): Trace amounts Applications: Monel 400 is well-known for its outstanding resistance to seawater, hydrofluoric acid, sulfuric acid, and alkalis. It is widely used in marine engineering, chemical processing, and heat exchangers. Monel K500 (UNS N05500) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): ~30.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% Applications: Monel K500 offers the same corrosion resistance as Monel 400 but with significantly higher strength and hardness due to age-hardening. It is ideal for high-stress applications such as pump shafts, valve components, and marine fasteners. Applications of DIN 2576 Monel Flanges: • Marine and Offshore Engineering Ideal for seawater exposure, ballast systems, and structural applications in shipbuilding and offshore platforms. • Chemical and Petrochemical Processing Used in piping systems exposed to strong acids, caustics, and other corrosive agents. • Oil and Gas Industry Suitable for sour gas (H₂S) environments, offshore drilling equipment, and refining systems. • Heat Exchangers and Condensers Monel's thermal conductivity and corrosion resistance make it suitable for tube sheets and connecting flanges. • Power Generation Applied in cooling systems, boiler feedwater lines, and other aggressive service environments. • Aerospace and Defense Used in fuel and hydraulic systems where resistance to corrosion and stress cracking is required. Key Features: • Manufactured according to DIN 2576 specification • PN 10 pressure rating for low to medium-pressure fluid systems • Exceptional resistance to seawater, acids, alkalis, and chlorides • Available in Monel 400 and Monel K500 grades • Slip-on design enables easy installation and welding • Flat face versions for compatibility with flat gaskets and brittle materials • Excellent mechanical properties and corrosion resistance • Custom dimensions, finishes, and face types available upon request Conclusion: DIN 2576 Monel Flanges PN 10 from Ladhani Metal Corporation deliver high corrosion resistance and mechanical strength for aggressive environments where conventional materials fail. With availability in Monel 400 and K500 grades, these flanges are suitable for marine, oil & gas, and chemical applications. For technical support, project consultation, or custom orders, contact Ladhani Metal Corporation today.

DIN 2576 Inconel Flanges PN 10 are high-performance, slip-on flanges engineered from nickel-chromium-based superalloys designed for use in corrosive and high-temperature industrial environments. Manufactured to the DIN 2576 standard, these flanges are well-suited for low to medium-pressure applications requiring exceptional resistance to oxidation, thermal stress, and chemical attack. The slip-on design allows the flange to slide over the pipe and be welded in place, providing accurate alignment and strong mechanical stability. Ladhani Metal Corporation is a trusted manufacturer and exporter of Inconel flanges, offering precision-engineered components that meet international quality and dimensional standards. DIN 2576 Inconel flanges are ideal for challenging applications in aerospace, chemical processing, power generation, and marine systems. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for low to moderate pressure operations, delivering reliable sealing and long-term performance in fluid and gas transport systems. Flange Types: • Slip-On Flanges Designed to fit over the pipe and be welded on both sides, offering simplified installation and secure mechanical performance. • Flat Face (FF) Flanges Used with flat gaskets and mating surfaces, providing uniform gasket compression and sealing integrity, especially with brittle or non-metallic components. Inconel Grades and Composition: Inconel 600 (UNS N06600) Composition: • Nickel (Ni): ≥ 72.0% • Chromium (Cr): 14.0 – 17.0% • Iron (Fe): 6.0 – 10.0% • Trace elements: Manganese, Silicon, Copper Applications: Inconel 600 offers excellent resistance to high-temperature oxidation, chloride-ion stress corrosion cracking, and acidic environments. Commonly used in furnace components, chemical process heaters, and nuclear reactors. Inconel 625 (UNS N06625) Composition: • Nickel (Ni): ≥ 58.0% • Chromium (Cr): 20.0 – 23.0% • Molybdenum (Mo): 8.0 – 10.0% • Niobium (Nb) + Tantalum (Ta): 3.15 – 4.15% Applications: Inconel 625 is known for its outstanding corrosion resistance in harsh conditions, including seawater, acid baths, and high-pressure environments. It is used extensively in marine hardware, offshore oil and gas systems, and aerospace exhaust systems. Inconel 718 (UNS N07718) Composition: • Nickel (Ni): 50.0 – 55.0% • Chromium (Cr): 17.0 – 21.0% • Iron (Fe): Balance • Niobium (Nb): 4.75 – 5.5% • Molybdenum (Mo): 2.8 – 3.3% • Titanium (Ti) + Aluminum (Al): ~1% Applications: Inconel 718 is a high-strength, precipitation-hardenable alloy with excellent corrosion and oxidation resistance. It performs well in cryogenic to high-temperature environments and is widely used in jet engines, high-temperature bolting, power generation turbines, and downhole oil and gas equipment. Applications of DIN 2576 Inconel Flanges: • Chemical and Petrochemical Processing Ideal for use in systems handling strong acids, solvents, and oxidizing agents at elevated temperatures. • Power Generation Used in heat exchangers, boiler systems, and turbine piping exposed to thermal cycling and steam corrosion. • Marine and Offshore Industries Excellent choice for seawater-cooled systems, marine risers, and subsea components due to its resistance to pitting and crevice corrosion. • Aerospace and Defense Applied in engine exhausts, combustion chambers, and other high-heat zones requiring structural integrity under extreme conditions. • Nuclear and High-Risk Industrial Systems Reliable in applications with radioactive or caustic media, where corrosion and temperature resistance are critical. Key Features: • Manufactured to DIN 2576 standard • PN 10 pressure rating suitable for moderate-pressure piping systems • Outstanding resistance to corrosion, oxidation, and high temperatures • Available in Inconel 600, 625, and other grades upon request • Slip-on design for ease of welding and proper pipe alignment • Flat face options for compatibility with a variety of gaskets and joint materials • Ideal for harsh chemical, thermal, and marine environments • Custom sizes, face types, and finishes available as per project requirements Conclusion: DIN 2576 Inconel Flanges PN 10 from Ladhani Metal Corporation are engineered for the toughest industrial environments, delivering performance, durability, and corrosion resistance where stainless steel or other materials may fail. For material selection support, technical data sheets, or customized orders, contact Ladhani Metal Corporation today.