'high quality dc07 steel sheets and coils'

QUALITY STANDARD MATERIAL NO. DC07 DIN EN 10130 1.0873 The super deep drawing grade DC07 is specified according to the standard DIN EN 10130, which focuses on cold-rolled flat products made of soft steels for cold forming. This standard ensures that the technical requirements and test methods for cold-rolled products are met, which are of great importance in various industrial applications, especially where the highest demands are placed on formability and surface quality. DC07 is a particularly low-carbon steel characterized by exceptional cold formability. The chemical composition of DC07 is strictly controlled to ensure its excellent mechanical properties. The carbon content in DC07 is typically a maximum of 0.01 %, while the manganese content is a maximum of 0.20 %. The addition of micro-alloyed elements such as titanium and niobium can further improve formability and strength. The mechanical properties of DC07 are characterized by a very low maximum yield strength of 120 MPa and a tensile strength of between 270 and 350 MPa. A particularly outstanding property of DC07 is its high elongation at break of at least 40 %, which underlines the excellent formability of the material. These properties make DC07 ideal for the production of complex components that require extremely high precision and surface quality, such as deep-drawn body parts in the automotive industry or highly complex components in the electronics industry. The DIN EN 10130 standard also specifies precise tolerances for dimensions, shape and surface finish. These tolerances are crucial to ensuring consistently high product quality and meeting the requirements of end users. The surface of the cold-rolled flat products can be supplied in various qualities, from matt to high-gloss, to meet the specific requirements of different applications. The DIN EN 10152 standard specifies electrolytically galvanized, cold-rolled steel flat products for cold forming, including the super deep-drawing grade DC07. This standard defines the requirements for the zinc coating and the basic mechanical properties of the base material. DC07, when electrolytically galvanized in accordance with DIN EN 10152, is given an additional corrosion protection layer of zinc. This layer protects the material from oxidative influences and significantly increases the service life of the components made from it. The zinc coating can be applied in various thicknesses, depending on the specific requirements of the application. Typical coating thicknesses range from 5 to 20 µm. The chemical composition and mechanical properties of the base material DC07 remain unchanged after galvanizing and meet the requirements of DIN EN 10130. DC07 therefore retains its exceptional cold formability and mechanical performance. The yield strength, tensile strength and elongation at break also remain in the same range as for non-galvanized DC07. In addition to mechanical performance, the quality of the zinc coating is of central importance. The DIN EN 10152 standard specifies the requirements for the uniformity of the coating, the adhesive strength of the zinc and the surface quality. These requirements ensure that the galvanized products offer high corrosion resistance and an aesthetically pleasing surface. The use of DC07 in accordance with DIN EN 10152 is widespread in the automotive industry, the construction industry and in the manufacture of household appliances, where improved corrosion resistance is required in addition to high formability. Electrolytic galvanizing offers optimum protection here without impairing the excellent mechanical properties of the base material. In summary, it can be said that the DC07 super deep-drawing grade offers a wide range of applications in accordance with both DIN EN 10130 and DIN EN 10152. While DIN EN 10130 focuses on excellent formability and surface quality, DIN EN 10152 supplements these properties with improved corrosion resistance thanks to the zinc coating. Both standards ensure that DC07 is a reliable and high-quality material for numerous industrial applications.

QUALITY STANDARD MATERIAL NO. DC07 DIN EN 10130 1.0873 The super deep drawing grade DC07 is specified according to the standard DIN EN 10130, which focuses on cold-rolled flat products made of soft steels for cold forming. This standard ensures that the technical requirements and test methods for cold-rolled products are met, which are of great importance in various industrial applications, especially where the highest demands are placed on formability and surface quality. DC07 is a particularly low-carbon steel characterized by exceptional cold formability. The chemical composition of DC07 is strictly controlled to ensure its excellent mechanical properties. The carbon content in DC07 is typically a maximum of 0.01 %, while the manganese content is a maximum of 0.20 %. The addition of micro-alloyed elements such as titanium and niobium can further improve formability and strength. The mechanical properties of DC07 are characterized by a very low maximum yield strength of 120 MPa and a tensile strength of between 270 and 350 MPa. A particularly outstanding property of DC07 is its high elongation at break of at least 40 %, which underlines the excellent formability of the material. These properties make DC07 ideal for the production of complex components that require extremely high precision and surface quality, such as deep-drawn body parts in the automotive industry or highly complex components in the electronics industry. The DIN EN 10130 standard also specifies precise tolerances for dimensions, shape and surface finish. These tolerances are crucial to ensuring consistently high product quality and meeting the requirements of end users. The surface of the cold-rolled flat products can be supplied in various qualities, from matt to high-gloss, to meet the specific requirements of different applications. The DIN EN 10152 standard specifies electrolytically galvanized, cold-rolled steel flat products for cold forming, including the super deep-drawing grade DC07. This standard defines the requirements for the zinc coating and the basic mechanical properties of the base material. DC07, when electrolytically galvanized in accordance with DIN EN 10152, is given an additional corrosion protection layer of zinc. This layer protects the material from oxidative influences and significantly increases the service life of the components made from it. The zinc coating can be applied in various thicknesses, depending on the specific requirements of the application. Typical coating thicknesses range from 5 to 20 µm. The chemical composition and mechanical properties of the base material DC07 remain unchanged after galvanizing and meet the requirements of DIN EN 10130. DC07 therefore retains its exceptional cold formability and mechanical performance. The yield strength, tensile strength and elongation at break also remain in the same range as for non-galvanized DC07. In addition to mechanical performance, the quality of the zinc coating is of central importance. The DIN EN 10152 standard specifies the requirements for the uniformity of the coating, the adhesive strength of the zinc and the surface quality. These requirements ensure that the galvanized products offer high corrosion resistance and an aesthetically pleasing surface. The use of DC07 in accordance with DIN EN 10152 is widespread in the automotive industry, the construction industry and in the manufacture of household appliances, where improved corrosion resistance is required in addition to high formability. Electrolytic galvanizing offers optimum protection here without impairing the excellent mechanical properties of the base material. In summary, it can be said that the DC07 super deep-drawing grade offers a wide range of applications in accordance with both DIN EN 10130 and DIN EN 10152. While DIN EN 10130 focuses on excellent formability and surface quality, DIN EN 10152 supplements these properties with improved corrosion resistance thanks to the zinc coating. Both standards ensure that DC07 is a reliable and high-quality material for numerous industrial applications.

Being one of the leading organization in the market, highly involved in offering a broad range of Dished Ends as per DIN 28011 And DIN28013 to our esteemed customers. Our offered products are manufactured suing utmost quality raw material which is obtained from the authentic vendor if the supplier. Moreover, these products are accessible in different sizes and dimensions to suit the varied demands and needs of our customers.We Manufacture and Export Types Of Dishends / Endcaps / Heads ELLIPSOIDAL HEAD HEMISPHERICAL HEAD. TORISPHERICAL HEAD KLÖPPER HEAD KORBBOGEN HEAD Semi ellipsoidal head DIN28013 Flat dished heads Standard Flat dished heads Flat heads Convex Discs Plate Type Heads Diffuser Heads Cone , Bulk & Tank Vehicle Heads Weld Counstriction Special Pressed part Experienced In Making Grades Like Carbon steel,P265-GH, 16Mo3,15NiCuMoNb5, CrMo(V), Alloy steel, 10CrMo9-10,13CrMo4-5,ASME SA 387 Gr.11,Gr12,ASME SA 387 Gr.91,P355-Gh,-NH,-NL1,-NL2,ASME SA 516 Gr.60 , Gr.70,Stainless steel 1.4301,1.4307,1.4404,1.4541,1.4571,1.4539,1.4501,Stainless steel ASME SA240 304,304L,316,316l,321,321H,316Ti,904L,2205,Super Duplex 1.4462 , cr25,Nickel alloys Alloy 20,59,200,MONEL 400,INCONEL 600,601,625,INCOLOY 800,825, 825,Copper,Titanium Grade 2,Grade 5, Aluminium Test method: Impact -Test acc. to DIN EN 10045-2 Tensile test acc to DIN EN 10002-1 , ISO 6892-1 , ASTM A 370 Hot tensile test acc to DIN EN 10002-5 until 900°C Hardness Test acc. to Brinell and DIN EN ISO 6506-1 Testing of intercrystalline corrosion acc to ISO 3651-2 (A) , ASTM A 262 Pract. E X – Ray -Examination acc. to EN 1435 , ISO 5817 , ASME V Art.2 , VIII Div.1 § UW -51 UT - Ultrasonic testing acc. to EN 10160 , EN 10307 , ASME SA-578 , ASME SA-435 PT - Penetrant testing acc. to EN 571 , ASME V Art.6 , ASME VIII Div.1 App.8 MT- Magnetic particle testing acc. to EN 1291 , ASME V Art.7 , ASMEVIII Div.1 App.6 Certificate: Certificate acc. to EN 10204 - 3.1 and 3.2 from independent organization

QUALITY STANDARD MATERIAL NO. DC07 DIN EN 10130 1.0873 The super deep drawing grade DC07 is specified according to the standard DIN EN 10130, which focuses on cold-rolled flat products made of soft steels for cold forming. This standard ensures that the technical requirements and test methods for cold-rolled products are met, which are of great importance in various industrial applications, especially where the highest demands are placed on formability and surface quality. DC07 is a particularly low-carbon steel characterized by exceptional cold formability. The chemical composition of DC07 is strictly controlled to ensure its excellent mechanical properties. The carbon content in DC07 is typically a maximum of 0.01 %, while the manganese content is a maximum of 0.20 %. The addition of micro-alloyed elements such as titanium and niobium can further improve formability and strength. The mechanical properties of DC07 are characterized by a very low maximum yield strength of 120 MPa and a tensile strength of between 270 and 350 MPa. A particularly outstanding property of DC07 is its high elongation at break of at least 40 %, which underlines the excellent formability of the material. These properties make DC07 ideal for the production of complex components that require extremely high precision and surface quality, such as deep-drawn body parts in the automotive industry or highly complex components in the electronics industry. The DIN EN 10130 standard also specifies precise tolerances for dimensions, shape and surface finish. These tolerances are crucial to ensuring consistently high product quality and meeting the requirements of end users. The surface of the cold-rolled flat products can be supplied in various qualities, from matt to high-gloss, to meet the specific requirements of different applications. The DIN EN 10152 standard specifies electrolytically galvanized, cold-rolled steel flat products for cold forming, including the super deep-drawing grade DC07. This standard defines the requirements for the zinc coating and the basic mechanical properties of the base material. DC07, when electrolytically galvanized in accordance with DIN EN 10152, is given an additional corrosion protection layer of zinc. This layer protects the material from oxidative influences and significantly increases the service life of the components made from it. The zinc coating can be applied in various thicknesses, depending on the specific requirements of the application. Typical coating thicknesses range from 5 to 20 µm. The chemical composition and mechanical properties of the base material DC07 remain unchanged after galvanizing and meet the requirements of DIN EN 10130. DC07 therefore retains its exceptional cold formability and mechanical performance. The yield strength, tensile strength and elongation at break also remain in the same range as for non-galvanized DC07. In addition to mechanical performance, the quality of the zinc coating is of central importance. The DIN EN 10152 standard specifies the requirements for the uniformity of the coating, the adhesive strength of the zinc and the surface quality. These requirements ensure that the galvanized products offer high corrosion resistance and an aesthetically pleasing surface. The use of DC07 in accordance with DIN EN 10152 is widespread in the automotive industry, the construction industry and in the manufacture of household appliances, where improved corrosion resistance is required in addition to high formability. Electrolytic galvanizing offers optimum protection here without impairing the excellent mechanical properties of the base material. In summary, it can be said that the DC07 super deep-drawing grade offers a wide range of applications in accordance with both DIN EN 10130 and DIN EN 10152. While DIN EN 10130 focuses on excellent formability and surface quality, DIN EN 10152 supplements these properties with improved corrosion resistance thanks to the zinc coating. Both standards ensure that DC07 is a reliable and high-quality material for numerous industrial applications.

Ladhani Metal Corporation offers Stainless Steel Half Round Tube Shields designed to protect boiler tubes from erosion, corrosion, oxidation, and mechanical wear in power plants, refinery heaters, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs). These shields are semi-cylindrical tube covers fitted over vulnerable sections of boiler tubes to prevent premature thinning caused by high-velocity flue gases, abrasive ash particles, and soot blower impact. By acting as a sacrificial protective layer, Stainless Steel Half Round Tube Shields significantly extend tube service life and improve boiler reliability. Function of Tube Shields • Protect boiler tubes from erosion, corrosion, and scaling • Reduce tube wear in high-temperature and high-flow zones • Minimize shutdowns and maintenance costs • Extend overall efficiency and durability of the boiler system Ladhani Metal Corporation manufactures, supplies, and exports Stainless Steel Half Round Tube Shields in a wide range of standard and custom specifications to meet domestic and international project requirements. Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • 1Cr20Ni14Si2 • 1Cr25Ni20Si2 • Cr23Ni13 • Cr25Ni20 Applications: Extensively used in thermal power plants, waste heat recovery units, refinery heaters, petrochemical furnaces, HRSGs, and industrial boilers operating in erosive and corrosive environments. Uses • Protects boiler tubes against flue gas erosion and oxidation • Shields reheater and superheater tubes in high-temperature zones • Guards economizer and LTSH sections from ash erosion • Extends operational life in refinery and process heaters Features • Excellent corrosion and oxidation resistance at elevated temperatures • High mechanical strength and durability under cyclic heating • Precision-engineered for accurate fit over tube diameter • Easy installation, removal, and replacement during maintenance Applications • Power generation boilers – Tube protection in superheaters and reheaters • HRSGs – Reliable under frequent thermal cycling • Waste heat recovery boilers – Protection against abrasive and corrosive flue gases • Refinery and petrochemical heaters – Enhanced durability in aggressive atmospheres Conclusion Stainless Steel Half Round Tube Shields for Boilers from Ladhani Metal Corporation are engineered to provide superior protection against erosion, corrosion, and oxidation in demanding boiler environments. Manufactured in stainless steels and heat-resistant alloys, these shields ensure long service life, reduced downtime, and export-ready quality for global energy and industrial applications. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation manufactures Protection Tube Sleeves designed to safeguard boiler tubes, heat exchanger coils, and industrial piping exposed to high-temperature erosion, flue gas corrosion, and abrasive particle wear. These sleeves act as a replaceable protective covering, absorbing the mechanical and chemical damage that would otherwise reduce tube service life. Function of Protection Tube Sleeves • Protect boiler and heater tubes from erosion, oxidation, and scaling • Reduce wear in high-velocity flue gas zones and soot blower impact areas • Extend tube lifespan and minimize costly replacement downtime • Improve boiler reliability under harsh operating environments Ladhani Metal Corporation manufactures, supplies, and exports Protection Tube Sleeves in a variety of lengths, diameters, and thicknesses for both domestic and international projects. Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • 1Cr20Ni14Si2 • 1Cr25Ni20Si2 • Cr23Ni13 • Cr25Ni20 Applications: Widely used in thermal power plants, waste heat recovery boilers (WHRBs), HRSGs, superheaters, reheaters, economizers, and petrochemical process heaters. Uses • Provides erosion resistance for boiler tube bends and straight lengths • Shields tubes in high-velocity flue gas and abrasive ash environments • Suitable for high-temperature reheater and superheater tubes • Applied in HRSGs, WHRBs, and industrial steam plants Features • Excellent resistance to oxidation and erosion at high temperatures • Strong mechanical performance with precision-engineered fit • Easy installation and replacement during maintenance cycles • Available in stainless steels and heat-resistant alloy grades Applications • Power generation boilers – Tube protection in reheater and superheater zones • Waste heat recovery systems – Guards against ash and flue gas erosion • HRSGs – Withstands cyclic temperature variations • Industrial boilers and process heaters – Reliable under erosive service conditions Conclusion Protection Tube Sleeves by Ladhani Metal Corporation provide durable and cost-effective shielding for boiler tubes and steam system components operating in aggressive environments. Available in stainless steel and heat-resistant alloy grades, these sleeves ensure longer equipment life, reduced downtime, and export-quality reliability. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Half Round Tube Shield Ladhani Metal Corporation manufactures precision-engineered Half Round Tube Shields to protect boiler and heat exchanger tubes from corrosion, erosion, and surface degradation. Designed for durability in aggressive environments, these shields are especially suited for thermal equipment where tubes are subjected to high flow velocities, abrasive particles, and flue gas turbulence. Their half-round shape allows easy installation while offering long-term protection and reduced maintenance. 1Cr20Ni14Si2 Half Round Tube Shield for LTSH Tube The 1Cr20Ni14Si2 Half Round Tube Shield is manufactured from a high-temperature-resistant chromium-nickel-silicon alloy. With approximately 20% chromium, 14% nickel, and added silicon, this material offers outstanding oxidation resistance, excellent strength at elevated temperatures, and superior resistance to high-temperature corrosion. It is an ideal choice for shielding Low Temperature Superheater (LTSH) tubes, which are frequently exposed to flue gases carrying ash and particulate matter that can cause rapid wear. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr20Ni14Si2 Half Round Tube Shields, providing high-performance shielding solutions for challenging industrial heat transfer applications. Chemical Composition of 1Cr20Ni14Si2 – Heat-Resistant Alloy Steel • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.00 – 2.50% • Chromium (Cr): 19.0 – 22.0% • Nickel (Ni): 13.0 – 15.0% • Iron (Fe): Balance Applications: Best suited for components exposed to oxidizing environments, fluctuating temperatures, and particulate flow where metal surface protection is critical. Uses • Protection of LTSH tubes in thermal power plant boilers • Coverage of heat exchanger tubes in waste heat recovery boilers • Shielding superheater coils from ash erosion and thermal stress • Ideal for utility boilers, steam generators, and flue gas-exposed piping • Applied in industrial boilers within cement, pulp & paper, and refining sectors Features • High-temperature resistance – Performs well in continuous service at elevated temperatures • Oxidation protection – Excellent resistance to flue gas scaling and surface degradation • Precise fitment – Custom curved for exact tube geometry for secure and uniform coverage • Enhanced durability – Reduces erosion, thermal fatigue, and mechanical damage • Versatile installation – Compatible with clamp-on, weld-on, or banding attachment methods • Custom dimensions – Available in multiple sizes and thicknesses per system requirement Applications • thermal power stations – Protects superheater coils and economizer tube bends from low-temperature gas wear • WHRBs – Shields curved tubes in exhaust heat recovery systems • chemical and petrochemical plants – Ensures protection for process steam lines exposed to flue gases • HRSGs – Increases the durability of LTSH coil tubes in combined-cycle systems • boiler and furnace systems – Ideal for superheater areas prone to wear from ash and soot deposition Conclusion The 1Cr20Ni14Si2 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers excellent resistance to oxidation, scaling, and thermal damage in low-temperature superheater zones. Its heat-resistant composition and long service life make it a dependable choice for demanding boiler and heat exchanger applications across multiple industries. For custom requirements or technical inquiries, contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are designed to protect boiler tubes, heat exchanger coils, and superheaters from erosion, scaling, slag accumulation, and corrosive flue gases. These shields are widely used in thermal systems such as power plants, chemical processing units, and waste heat recovery boilers to improve tube longevity and reduce maintenance frequency. Their semi-cylindrical form allows easy installation on straight or curved tube surfaces in high-wear zones. SS 316 Half Round Tube Shield for LTSH Tube The SS 316 Half Round Tube Shield is manufactured from molybdenum-bearing austenitic stainless steel grade 316. Known for its excellent resistance to pitting, crevice corrosion, and chemical attack, SS 316 is ideal for environments where flue gas contains chlorides, moisture, or mildly acidic compounds. Designed specifically for Low Temperature Superheater (LTSH) applications, this shield provides critical surface protection in zones where steam is moderately superheated and tubes are exposed to ash, soot, and thermal cycling. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 316 Half Round Tube Shields for LTSH applications, offering reliable and corrosion-resistant shielding solutions for extended tube performance. Chemical Composition of SS 316 – Austenitic Stainless Steel with Molybdenum • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Suitable for low-temperature superheater zones exposed to corrosive ash, flue gas condensation, and thermal cycling, especially in coastal or chloride-rich environments. Uses • Installed on LTSH tubes in utility boilers to protect against acidic flue gas corrosion and soot erosion • Shields exposed tube sections in convection zones, economizers, and HRSG units • Applied in boilers using high-sulfur coal or biomass, where corrosion risks are elevated • Suitable for industrial steam systems and chemical processing units handling corrosive exhaust • Used in power plants operating in marine or high-humidity conditions Features • Superior corrosion resistance – Withstands chloride attack, acidic deposits, and moisture exposure • Thermal durability – Maintains mechanical strength and oxidation resistance under moderate heat • Custom fabrication – Manufactured to match the diameter and length of LTSH tubes for accurate fit • Easy to install – Compatible with welding, banding, or clamping methods • Reduces wear – Protects against pitting, scale buildup, and erosion in flue gas flow paths • Available in multiple thicknesses, lengths, and radii based on system design Applications • thermal power plants – Shields LTSH tubes to improve service life and efficiency • chemical plants – Applied in low-temperature zones of process boilers exposed to aggressive gases • waste heat recovery – Protects return coil sections from corrosion and erosion in WHRBs and HRSGs • industrial boilers – Guards tube surfaces in preheaters and economizers under corrosive flue conditions • steam generation systems – Used in moisture-laden or coastal plant environments requiring enhanced protection Conclusion The SS 316 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – delivers high-performance protection for boiler and superheater tubes in corrosive, low-temperature environments. With its excellent corrosion resistance and reliable thermal performance, it ensures extended operational life and reduced maintenance in critical heat exchange systems. For technical support, customization, or pricing inquiries, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-formed protective sleeves designed to guard heat exchanger and boiler tubes from high-temperature corrosion, erosion, and mechanical wear. These shields are used extensively across thermal power, petrochemical, and process industries to improve tube longevity and reduce maintenance costs. Their half-round design allows easy installation without dismantling the tube system. SS 304L U Type Half Round Tube Shield The SS 304L U Type Half Round Tube Shield is designed to protect both straight and curved (U-bend) tube sections in heat exchangers, superheaters, and boilers. Made from low-carbon stainless steel 304L, this shield provides excellent corrosion resistance and is particularly suitable for applications where post-weld heat treatment is not feasible. Its U-shaped profile ensures secure coverage of return bends, which are often the most vulnerable to thermal stress and flue gas attack. This shield is available in both inner and outer configurations to ensure full tube coverage. This shield is available in two key configurations to provide complete protection around the bend radius: • Outer U Type Half Round Tube Shield – Covers the external curvature of U-bend tubes exposed to radiant heat, slag, and gas flow. • Inner U Type Half Round Tube Shield – Protects the internal arc of bends from turbulence, scaling, and localized heat buildup. Ladhani Metal Corporation is a trusted manufacturer and exporter of SS 304L U Type Half Round Tube Shields, delivering durable and customized protection solutions for global industrial applications. Chemical Composition of SS 304L – Austenitic Stainless Steel • Carbon (C): ≤ 0.035% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 12.0% • Iron (Fe): Balance Applications: Ideal for high-temperature and corrosive environments where low carbon content is preferred to minimize carbide precipitation during welding. Uses • U-bend tube shielding in superheaters and heat exchangers • Return bend protection in boilers and WHRBs • Shielding of curved coils in steam reforming and process plants • Corrosion prevention in waste-to-energy and flue gas-exposed systems • Surface protection in ammonia plants, HRSGs, and incinerators Features • corrosion resistant – SS 304L offers excellent resistance to oxidation, scaling, and chemical attack in high-temperature environments • low carbon content – minimizes risk of carbide precipitation during welding, improving post-weld corrosion resistance • precise fit – custom-formed to match U-bend radius for secure installation and effective shielding • high durability – retains mechanical strength under thermal cycling and flue gas exposure • easy installation – designed for quick on-site mounting via clamping, welding, or banding • versatile finish – available in pickled, passivated, or bright annealed surface treatments • customizable – produced in various lengths, thicknesses, and diameters as per customer requirements Applications • Thermal power plants – Protects U-bend tubes in superheaters, reheaters, and economizers. Prevents oxidation, scaling, and thermal damage from flue gases. • Petrochemical refineries – Shields curved furnace and exchanger tubes. Resists heat, carburizing gases, and corrosive media. • Waste heat recovery systems (WHRBs) – Guards return bends from ash erosion and gas turbulence. Enhances tube life in incinerators, engines, and kilns. • Chemical and fertilizer plants – Used on U-bends in reactors and reformers. Prevents stress corrosion and thermal fatigue. • HRSGs and boilers – Installed on return coils exposed to high-temperature flue gases. Ensures reliable operation under cyclic heating conditions. Conclusion The SS 304L U Type Half Round Tube Shield by Ladhani Metal Corporation provides comprehensive and long-lasting protection for U-bend tube sections operating in aggressive thermal and corrosive environments. Manufactured with high-precision forming and superior materials, these shields offer reliable coverage, excellent weldability, and extended service life. As a leading manufacturer and exporter, Ladhani Metal Corporation offers customized shielding solutions that match your project’s specifications and environmental demands. For detailed specifications, technical support, or to request a quotation, please contact Ladhani Metal Corporation.