Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-formed protective components used to guard boiler tubes, heat exchangers, and superheaters against flue gas erosion, fly ash abrasion, scaling, and thermal fatigue. These shields are widely used in power generation, chemical processing, and industrial steam systems to extend the operational life of tubing in high-wear zones. The half-round profile ensures easy fitment over straight or curved tubes, especially in areas exposed to turbulent gas flow and ash impact. 1Cr18Ni9Ti Half Round Tube Shield for LTSH Tube The 1Cr18Ni9Ti Half Round Tube Shield is manufactured from a titanium-stabilized austenitic stainless steel grade, equivalent to AISI 321. This material offers excellent resistance to intergranular corrosion and high-temperature oxidation while maintaining good mechanical strength. Its titanium content improves stability during welding and long-term thermal exposure, making it especially suitable for Low Temperature Superheater (LTSH) applications in boilers and heat recovery systems where steam tubes are subject to moderate heat, soot, and particulate attack. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr18Ni9Ti Half Round Tube Shields for LTSH systems, offering reliable and corrosion-resistant protection for thermal and energy-related applications. Chemical Composition of 1Cr18Ni9Ti – Titanium-Stabilized Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 8.0 – 11.0% • Titanium (Ti): ≥ 5 × C% • Iron (Fe): Balance Applications: Ideal for LTSH areas and convection zones in boilers exposed to flue gas condensation, moderate corrosion, and thermal fatigue from cyclic operations. Uses • Installed on LTSH tubes to protect from scaling, soot erosion, and ash deposition in thermal power plants • Shields superheater coils and heat exchanger bends in WHRBs and HRSGs • Suitable for industrial boilers in chemical plants where acidic or chloride-bearing gases are present • Used in biomass and coal-fired systems to reduce wear on tube surfaces from fly ash and gas turbulence • Effective in marine and coastal steam generation systems with moisture and chloride exposure Features • Excellent intergranular corrosion resistance – Stabilized with titanium for weld integrity and long-term stability • High-temperature oxidation resistance – Performs well under cyclic heat exposure and oxidizing gas conditions • Custom fit – Manufactured to match exact tube diameter, curvature, and installation length • Easy to mount – Suitable for welding, clamping, or banding installation methods • Enhanced tube life – Reduces maintenance frequency and increases system efficiency • Available in various thicknesses, lengths, and bend radii as per operational needs Applications • thermal power stations – Protects LTSH tubes from scaling and ash erosion in flue gas zones • waste heat recovery units – Shields return tube bends and convection coils from abrasive flow • steam generation systems – Enhances tube life in low-temperature superheater environments • refinery boilers – Resists acidic gas effects and thermal stress in process heating units • utility boilers – Used in coal-fired and biomass-fired systems requiring long-term tube protection Conclusion The 1Cr18Ni9Ti Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers high-performance protection for boiler and superheater tubes in low-temperature, corrosive, and abrasive environments. With titanium stabilization and excellent thermal durability, it ensures extended service life and improved system reliability in a range of industrial and thermal applications. For customized designs, technical consultation, or pricing details, please contact Ladhani Metal Corporation.

DIN 2634 stainless steel flanges PN 25 are precision-engineered weld neck flanges designed and manufactured in accordance with the DIN 2634 standard. These flanges are suitable for high-pressure pipeline systems operating up to 25 bar (362 psi), providing robust and secure connections for a variety of critical industrial applications. Constructed from high-quality stainless steel grades such as 304, 316, and 321, these flanges offer excellent mechanical properties, enhanced corrosion resistance, and dependable performance in aggressive service conditions. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of stainless steel flanges, known for delivering high-precision products that meet stringent international quality and dimensional standards. Each flange undergoes rigorous testing and quality checks to ensure optimal performance, safety, and longevity under high-pressure conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Engineered for high-pressure environments requiring reinforced flange connections with reliable resistance to corrosion and mechanical stress. Flange Type: • Weld Neck Flanges Incorporating a long tapered hub, weld neck flanges help maintain pipe alignment, reduce stress concentration at the weld joint, and enable smooth fluid flow with minimal turbulence. • Flat Face (FF) Flanges Ideal for systems utilizing soft gaskets or cast components, flat face flanges promote consistent gasket compression and sealing integrity. Stainless Steel Grades and Typical Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Suitable for general-purpose piping systems in environments with moderate corrosion exposure, including potable water and light-duty process lines. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Ideal for systems exposed to chlorides, cleaning agents, or other corrosive substances such as in chemical processing, pharmaceuticals, and marine environments. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Frequently used in high-temperature services such as thermal processing equipment, exhaust systems, and heat exchangers due to its stability against intergranular corrosion. Applications of DIN 2634 Stainless Steel Flanges PN 25: • Chemical Processing Units Handles higher operating pressures in systems transporting acids, alkalis, and solvents. • Marine and Offshore Installations Resistant to pressure fluctuations and saltwater corrosion in offshore piping networks. • Pharmaceutical and Biotech Plants Used in clean process environments where both pressure integrity and corrosion resistance are critical. • Industrial Steam and Thermal Systems Suitable for steam distribution and thermal expansion pipelines operating under high pressure. • Power Generation Facilities Applied in turbine piping, heat recovery systems, and pressurized cooling water circuits. Key Features: • Manufactured to DIN 2634 dimensional and pressure specifications • PN 25 pressure rating supports high-pressure operation • Weld neck design ensures leak-tight, stress-resistant connections • Available in stainless steel grades 304, 316, 321 and their low-carbon variants • Superior resistance to high-temperature corrosion and chemical attack • Long-term mechanical strength and fatigue resistance • Custom sizes, finishes, and pressure ratings available upon request Conclusion: DIN 2634 stainless steel flanges PN 25 from Ladhani Metal Corporation are engineered for high-performance use in high-pressure industrial environments where safety, corrosion resistance, and durability are paramount. These flanges are ideal for chemical, marine, thermal, and high-purity applications requiring strong, leak-resistant, and corrosion-resistant connections. For technical support, customized solutions, or pricing details, contact Ladhani Metal Corporation today.

DIN 2633 Monel flanges PN 16 are precision-engineered weld neck flanges manufactured in accordance with the DIN 2633 standard. Designed for pipeline systems operating at pressures up to 16 bar (232 psi), these flanges provide exceptional resistance to corrosive environments, including seawater, acids, and alkalis. Manufactured from high-performance Monel alloys such as Monel 400 and Monel K500, they combine outstanding mechanical strength with excellent corrosion resistance, making them suitable for demanding industrial and marine applications. Ladhani Metal Corporation is a trusted global manufacturer and supplier of Monel flanges, known for superior material quality, dimensional accuracy, and strict compliance with international standards. Each flange undergoes rigorous quality checks and testing to ensure consistent performance in critical service conditions. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for medium-pressure systems requiring corrosion resistance and structural reliability. Flange Type: • Weld Neck Flanges Designed with a long tapered hub to ensure smooth flow transitions, proper pipe alignment, and minimized stress concentration for high-integrity connections. • Flat Face (FF) Flanges Provides a uniform sealing surface ideal for systems with soft gasket materials or cast mating components, ensuring optimal gasket compression. Monel Grades and Full Composition: Monel 400 • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): ≤ 2.5% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% Applications: Widely used in marine engineering, chemical processing, pump and valve components, and environments exposed to hydrofluoric and sulfuric acids. Monel K500 • Nickel (Ni): ≥ 63.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2.0% • Carbon (C): ≤ 0.25% Applications: Suitable for high-strength applications in marine, oil and gas, and sour gas service environments. Offers improved mechanical properties over Monel 400 while retaining excellent corrosion resistance. Applications of DIN 2633 Monel Flanges PN 16: • Marine and Offshore Systems Ideal for saltwater piping, desalination systems, and submerged components due to excellent resistance to chloride stress corrosion. • Chemical Processing Industries Used in systems handling strong acids, alkalis, and organic solvents, especially hydrofluoric acid. • Oil and Gas Exploration Resistant to sour gas environments, high pressures, and corrosive drilling fluids. • Heat Exchangers and Condensers Monel flanges are preferred for their stability under fluctuating thermal loads and corrosive fluids. • Power Generation Used in cooling water and fuel handling systems where reliability under stress and corrosion is essential. Key Features: • Manufactured to DIN 2633 specifications • PN 16 rating for medium-pressure pipelines • Weld neck design for stress-distributed, leak-proof connections • Available in Monel 400 and K500 grades for tailored performance • Excellent resistance to corrosion in marine, acidic, and alkaline environments • High tensile strength and resistance to mechanical fatigue • Custom sizes, pressure classes, and finishes available on request Conclusion: DIN 2633 Monel Flanges PN 16 from Ladhani Metal Corporation offer robust performance in highly corrosive and pressure-sensitive applications. With superior resistance to seawater, acids, and harsh industrial chemicals, these flanges are engineered for longevity and strength in marine, chemical, and oil and gas systems. For custom configurations, technical advice, or pricing details, contact Ladhani Metal Corporation today.

DIN 2632 duplex steel flanges PN 10 are robust weld neck flanges manufactured in accordance with the DIN 2632 standard, designed for medium-pressure applications up to 10 bar (145 psi). These flanges are made from duplex stainless steel, a material that combines the high strength of ferritic steel with the corrosion resistance of austenitic stainless steel. This dual-phase microstructure provides excellent resistance to stress corrosion cracking, pitting, and crevice corrosion in aggressive environments. Ladhani Metal Corporation is a reputable global manufacturer and supplier of duplex steel flanges, offering products with precise dimensions, superior mechanical integrity, and full compliance with international industry standards. All flanges are rigorously inspected and tested to ensure reliability in demanding applications. Pressure Rating: • PN 10 (10 bar / 145 psi): Ideal for medium-pressure piping systems requiring a balance of strength, corrosion resistance, and cost efficiency. Flange Type: • Weld Neck Flanges Engineered with a long tapered hub for secure and stress-reducing pipe-to-flange connections. Supports smooth fluid transition and minimizes turbulence. • Flat Face (FF) Flanges Flat face construction ensures even gasket compression, suitable for use with soft gasket materials and cast equipment. Duplex Steel Grades and Composition: Duplex 2205 (UNS S32205 / S31803) • Chromium (Cr): 21–23% • Nickel (Ni): 4.5–6.5% • Molybdenum (Mo): 2.5–3.5% • Nitrogen (N): 0.14–0.20% • Manganese (Mn): ≤ 2.0% • Carbon (C): ≤ 0.03% • Iron (Fe): Balance Applications: Duplex 2205 offers outstanding resistance to pitting, crevice corrosion, and chloride stress corrosion cracking. It is widely used in offshore platforms, chemical processing, marine environments, and desalination plants. Applications of DIN 2632 Duplex Steel Flanges PN 10: • Oil and Gas Industry Used in offshore and onshore systems handling sour gas, saltwater, and corrosive media. • Chemical and Petrochemical Ideal for reactors, heat exchangers, and piping exposed to acids, chlorides, and oxidizing substances. • Marine and Shipbuilding Provides excellent performance in seawater systems, ballast water treatment, and ship hull piping. • Desalination and Water Treatment Ensures long-term performance in high-salinity and high-chloride environments. • Pulp and Paper Applied in bleach plants and other areas exposed to aggressive chemical agents. Key Features: • Manufactured to DIN 2632 specifications • PN 10 pressure rating suitable for medium-pressure applications • Weld neck design for high-integrity, low-stress connections • Available in Duplex 2205 and Super Duplex 2507 for tailored corrosion resistance and strength • Flat face option for optimal gasket compression • Excellent resistance to stress corrosion cracking and pitting • High strength-to-weight ratio • Custom sizes, pressure classes, and finishes available upon request Conclusion: DIN 2632 duplex steel flanges PN 10 from Ladhani Metal Corporation provide a highly reliable, corrosion-resistant, and mechanically strong solution for demanding industrial applications. With advanced material options such as Duplex 2205 and Super Duplex 2507, these flanges are well-suited for marine, chemical, oil and gas, and water treatment sectors. For customized solutions, technical support, or pricing details, contact Ladhani Metal Corporation today

DIN 2630 Monel flanges PN 2.5 are precision-engineered weld neck flanges manufactured according to the DIN 2630 standard. These flanges are designed for low-pressure applications up to 2.5 bar (36.25 psi), offering outstanding resistance to corrosion, especially in marine and chemical environments. Fabricated from premium Monel alloys such as Monel 400 and Monel K500, these flanges provide excellent mechanical strength and durability, making them ideal for challenging service conditions in low-pressure piping systems. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of Monel flanges, known for delivering high-quality products with advanced engineering precision. Our DIN 2630 PN 2.5 Monel weld neck flanges are extensively used in industries such as marine, chemical processing, oil and gas, and power generation, where superior corrosion resistance and reliability are essential. Each flange is produced to meet stringent industry standards for safety, performance, and longevity. Pressure Rating: • PN 2.5 (2.5 bar / 36.25 psi): Suitable for low-pressure applications requiring corrosion-resistant materials with excellent mechanical integrity. Flange Type: • Weld Neck Flanges Designed with a long tapered hub to enhance stress distribution and minimize turbulence, providing structural reliability and smooth fluid flow in demanding systems. • Flat Face (FF) Flanges Flat face flanges are ideal for use with cast components or soft gasket materials, ensuring uniform gasket compression in low-pressure environments. Monel Grades and Full Composition: Monel 400 (UNS N04400) • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): 2.0 – 3.0% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% Applications: Exceptional resistance to seawater, acids, and alkalis. Widely used in marine applications, chemical and hydrocarbon processing, and heat exchangers. Monel K500 (UNS N05500) • Nickel (Ni): ≥ 63.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2.0% • Manganese (Mn): ≤ 1.5% • Carbon (C): ≤ 0.25% Applications: Precipitation-hardened alloy offering greater strength and hardness than Monel 400 while retaining excellent corrosion resistance. Used in pump shafts, valves, and marine equipment. Applications of DIN 2630 Monel Flanges PN 2.5: • Marine Industry Ideal for use in seawater piping, heat exchangers, and ballast systems where corrosion resistance is critical. • Chemical Processing Utilized in process piping carrying corrosive chemicals and acidic media under low pressure. • Oil and Gas Industry Suitable for sour gas environments, offshore drilling platforms, and processing equipment exposed to corrosive fluids. • Power Generation Used in cooling and condensate systems where resistance to brine and steam is required. Key Features: • Manufactured in accordance with DIN 2630 standards • PN 2.5 pressure class designed for low-pressure applications • Weld neck design ensures better stress handling and flow performance • Flat face option available for uniform gasket sealing • Made from corrosion-resistant Monel 400 and Monel K500 alloys • High mechanical strength and excellent resistance to marine and chemical corrosion • Custom sizes, specifications, and finishes available upon request Conclusion: DIN 2630 Monel Flanges PN 2.5 from Ladhani Metal Corporation provide an ideal solution for low-pressure systems operating in aggressive and corrosive environments. With superior mechanical strength and outstanding resistance to seawater, acids, and other chemicals, these flanges are a reliable choice for critical applications across various industries. For custom configurations, technical consultation, or pricing details, contact Ladhani Metal Corporation.

DIN 2630 stainless steel flanges PN 2.5 are precision-fabricated weld neck flanges produced in accordance with the DIN 2630 standard. These flanges are engineered for low-pressure applications up to 2.5 bar (36.25 psi), providing reliable and leak-resistant connections in light-duty and non-critical piping systems. Manufactured from premium stainless steel grades including 304, 316, and 321, they offer excellent corrosion resistance, mechanical stability, and longevity even in mildly corrosive or intermittent industrial environments. Ladhani Metal Corporation is a globally trusted manufacturer and supplier of stainless steel flanges, known for delivering consistent quality and engineering precision. Ladhani Metal Corporation ensures each flange meets relevant industrial standards and environmental requirements. Pressure Rating: • PN 2.5 (2.5 bar / 36.25 psi): Suitable for low-pressure pipeline systems that require basic joint integrity and corrosion resistance. Flange Type: • Weld Neck Flanges Designed with a long tapered hub to support pipe alignment and reduce stress at the base of the flange. Ensures steady flow transition with minimal turbulence. • Flat Face (FF) Flanges Flat face design ensures even gasket compression and is preferred in systems using cast components or soft gasket materials. Stainless Steel Grades and Full Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Ideal for general-purpose low-pressure systems including potable water lines, food-grade applications, and non-aggressive chemical piping. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Offers higher corrosion resistance for systems handling chlorinated water, cleaning agents, or mildly acidic substances. Common in pharmaceutical and marine-grade piping. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Best suited for moderate temperature and corrosion conditions. Often used in low-pressure exhaust lines, thermal processing, and food-grade heat equipment. Applications of DIN 2630 Stainless Steel Flanges PN 2.5: • Water Supply and Treatment Used in potable and greywater systems requiring low-pressure fluid conveyance. • Food and Beverage Industry Ideal for hygienic piping with low flow rates and non-corrosive media. • Chemical Distribution Used in systems handling diluted or non-aggressive chemicals. • HVAC and Ventilation Suited for duct flanges and connections in air-handling systems. Key Features: • Compliant with DIN 2630 standards • PN 2.5 pressure class for low-pressure service • Weld neck design for improved pipe-flange connection • Available in stainless steel grades 304, 316, and 321 • Flat face configuration for even gasket contact • Corrosion-resistant and long-lasting under mild mechanical loads • Suitable for food-grade, chemical, and HVAC systems • Custom sizes, finishes, and material grades available upon request Conclusion: DIN 2630 Stainless Steel Flanges PN 2.5 from Ladhani Metal Corporation are optimized for low-pressure industrial applications where corrosion resistance, hygiene, and operational simplicity are key. Made from high-grade stainless steel materials, these weld neck flanges offer a reliable, economical solution for various sectors including water distribution, food processing, and light chemical service. For custom dimensions, technical consultation, or pricing details, contact Ladhani Metal Corporation today.

Ladhani Metal Corporation is a leading manufacturer and exporter of DIN 2565 Inconel flanges, engineered for high-performance, corrosion-resistant, and heat-resistant piping connections in low-pressure systems. These flanges are manufactured in accordance with DIN 2565 standards and are typically available with a PN 6 pressure rating, making them ideal for threaded piping connections where welding is not required. Inconel flanges are made from a family of nickel-chromium-based superalloys known for their excellent resistance to oxidation, high temperatures, and corrosive environments. They are especially suitable for critical applications in extreme operating conditions, including chemical processing, marine, aerospace, and high-temperature industrial systems. Flange Types: • Threaded (Screwed) Flanges: Allow for quick and easy installation without welding, suitable for systems requiring periodic disassembly. • Raised Face (RF) Flanges: Provides enhanced gasket compression, ensuring a tight and reliable seal in corrosive and high-temperature applications. • Flat Face (FF) Flanges: Commonly used in low-pressure piping systems, especially when paired with non-metallic gaskets. • Forged Threaded Flanges: Forging enhances mechanical strength and resistance to fatigue and stress. • Custom-Machined Flanges: Precision-machined to meet specific dimensional, material, and pressure requirements for specialized uses. Available Inconel Grades and Chemical Composition: 1. Inconel 600 (UNS N06600) o Nickel (Ni): ≥ 72.0% o Chromium (Cr): 14.0 – 17.0% o Iron (Fe): 6.0 – 10.0% Applications: Resistant to high temperatures and oxidizing environments; ideal for furnace components, chemical processing, and heat exchangers. 2. Inconel 625 (UNS N06625) o Nickel (Ni): ≥ 58.0% o Chromium (Cr): 20.0 – 23.0% o Molybdenum (Mo): 8.0 – 10.0% o Niobium (Nb): 3.15 – 4.15% Applications: Offers outstanding fatigue strength and chloride corrosion resistance; used in marine systems, nuclear reactors, and aerospace components. Applications of DIN 2565 Inconel Flanges: • Chemical Processing: Excellent resistance to a wide range of corrosive chemicals and high-temperature oxidation. • Marine and Offshore: Withstands saltwater corrosion and extreme marine conditions. • Power and Heat Generation: Suitable for high-temperature boiler systems and superheaters. • Aerospace Industry: Ideal for jet engines, turbine components, and exhaust systems. • Nuclear and Defense: Used in systems exposed to radiation, high pressure, and corrosive environments. Key Features: • Manufactured in compliance with DIN 2565 specifications and PN 6 pressure rating • Excellent resistance to oxidation, carburization, and chloride stress corrosion • High mechanical strength at elevated temperatures • Non-magnetic and corrosion-resistant in both oxidizing and reducing environments • Supplied with complete material traceability, test certificates, and quality assurance documents Conclusion: DIN 2565 Inconel flanges from Ladhani Metal Corporation are engineered to meet the highest standards of performance, durability, and corrosion resistance. Ideal for demanding industries where reliability under extreme conditions is essential, these flanges deliver long-term performance and safety. Backed by stringent quality control and precision manufacturing, our Inconel flanges are a trusted choice for critical applications worldwide. For technical details, pricing information, or to place a bulk order, contact Ladhani Metal Corporation today.

Ladhani Metal Corporation is a reliable manufacturer and exporter of DIN 2565 stainless steel flanges, crafted to provide secure, leak-proof connections in low-pressure piping systems. Compliant with DIN 2565 standards, these flanges are available in PN 6 pressure rating, making them ideal for threaded pipe connections in systems that do not require welding. These stainless steel threaded flanges are particularly suited for environments requiring resistance to corrosion, cleanliness, and easy maintenance. They are widely used in water supply lines, food processing, chemical plants, marine systems, and other industrial applications. Flange Types: • Threaded (Screwed) Flanges: Designed to connect to pipes without welding by using internal threads. • Raised Face (RF) Flanges: Feature a slightly elevated sealing surface to improve gasket compression and prevent leakage. • Flat Face (FF) Flanges: Have a flat sealing surface, typically used with flat gaskets and in low-pressure systems. • Forged Threaded Flanges: Manufactured through forging for enhanced strength and structural integrity in threaded connections. • Custom-Machined Threaded Flanges: Tailored to specific dimensions or threading requirements for specialized piping setups. Available Grades and Chemical Composition: Stainless Steel 304 (UNS S30400) Carbon (C): ≤ 0.08% Manganese (Mn): ≤ 2.00% Silicon (Si): ≤ 1.00% Phosphorus (P): ≤ 0.045% Sulfur (S): ≤ 0.030% Chromium (Cr): 18.0 – 20.0% Nickel (Ni): 8.0 – 10.5% Applications: Ideal for general use in water, air, and non-aggressive environments. Stainless Steel 316 (UNS S31600) Carbon (C): ≤ 0.08% Manganese (Mn): ≤ 2.00% Silicon (Si): ≤ 1.00% Phosphorus (P): ≤ 0.045% Sulfur (S): ≤ 0.030% Chromium (Cr): 16.0 – 18.0% Nickel (Ni): 10.0 – 14.0% Molybdenum (Mo): 2.0 – 3.0% Applications: Suitable for harsh, corrosive environments such as marine, chemical, and industrial processing systems. Stainless Steel 321 (UNS S32100) Carbon (C): ≤ 0.08% Manganese (Mn): ≤ 2.00% Silicon (Si): ≤ 1.00% Phosphorus (P): ≤ 0.045% Sulfur (S): ≤ 0.030% Chromium (Cr): 17.0 – 19.0% Nickel (Ni): 9.0 – 12.0% Titanium (Ti): 5xC – 0.70% Applications: Commonly used in high-temperature applications like heat exchangers, pressure vessels, and exhaust systems. Applications: DIN 2565 stainless steel flanges with PN 6 rating are used in a variety of industries including: • Water Treatment & Distribution: Ideal for municipal water supply and wastewater systems due to their corrosion resistance and durability. • Chemical Processing: Suitable for systems where stainless steel is required to withstand aggressive chemicals. • Food & Beverage: Commonly found in sanitary pipelines, ensuring hygienic and clean connections. • Marine Industry: Used in piping systems for vessels, ensuring longevity and resistance to corrosion in saline environments. • Pharmaceuticals: Provides the necessary sanitary and non-reactive qualities required in pharmaceutical manufacturing environments. Key Features: • Manufactured according to DIN 2565 specifications. • Corrosion-resistant, ideal for a wide range of chemical and environmental conditions. • High strength and long-lasting performance in threaded piping systems. • Available in multiple grades, sizes, and pressure ratings, including PN 6, for diverse industrial applications. Conclusion: DIN 2565 stainless steel flanges from Ladhani Metal Corporation offer reliable, cost-effective, and durable solutions for various low-pressure piping systems. With options in trusted grades such as 304, 316, and 321, these flanges meet international standards for performance and reliability. Backed by precise manufacturing and rigorous quality checks, our stainless steel flanges ensure dependable performance across multiple industries. For more technical details, pricing, or bulk inquiries, feel free to contact Ladhani Metal Corporation.

Ladhani Metal Corporation is a reliable manufacturer and supplier of DIN 2561 carbon steel flanges, built to deliver strength, durability, and cost-effectiveness in low-pressure piping systems. Produced in compliance with the DIN 2561 standard, these flanges are offered in pressure ratings such as PN6, PN10, PN16, PN25, and PN40, tailored to meet varied industrial requirements. Carbon steel flanges are widely used in applications where high mechanical strength is needed and corrosion resistance is less critical. They are commonly found in oil and gas, petrochemical, power plants, and general engineering industries. Flange Types: Weld neck flanges: Ideal for high-pressure, high-temperature environments requiring a strong connection. Raised face (RF): Designed for better gasket sealing to prevent leakage under pressure. Flat face (FF): Suitable for systems using brittle or non-metallic gasket materials. Common Grades, Chemical Composition, and Applications: ASTM A105 (Forged Carbon Steel) Chemical Composition: Carbon (C): 0.35% max Manganese (Mn): 0.60–1.05% Phosphorus (P): 0.035% max Sulfur (S): 0.040% max Silicon (Si): 0.10–0.35% Applications: Widely used in pressure systems at ambient and high temperatures, such as valves, fittings, and flanges in oil & gas pipelines and refineries. ASTM A350 LF2 (Low-Temperature Carbon Steel) Chemical Composition: Carbon (C): ≤ 0.30% Manganese (Mn): 0.60–1.35% Phosphorus (P): ≤ 0.035% Sulfur (S): ≤ 0.040% Silicon (Si): 0.15–0.30% Applications: Used in low-temperature service applications such as cryogenic piping, pressure vessels, and heat exchangers. Key Features: Manufactured according to DIN 2561 specifications. High mechanical strength and load-bearing capacity. Cost-effective solution for general-purpose industrial piping. Available in various face types, sizes, and drilling patterns. Applications: Oil & Gas Pipelines: Ideal for upstream, midstream, and downstream operations where high strength is essential. Petrochemical Industry: Used in process lines, utility systems, and structural pipework exposed to high temperatures and pressure. Power Plants: Suitable for use in high-temperature steam and water pipelines in thermal and nuclear power plants. Water Treatment & Distribution: Commonly used in municipal water supply and wastewater systems due to their strength and cost-efficiency. Construction & Engineering: Employed in structural supports, machinery, and piping frameworks where mechanical integrity is crucial. Conclusion: DIN 2561 carbon steel flanges from Ladhani Metal Corporation offer a strong, economical solution for a wide range of industrial piping systems. With availability in trusted grades like ASTM A105 and A350 LF2, these flanges meet international standards for strength and reliability. Backed by precise manufacturing and rigorous quality checks, our carbon steel flanges ensure dependable performance across industries. For technical details, pricing, or bulk inquiries, contact Ladhani Metal Corporation.