Half Round Tube Shield Ladhani Metal Corporation manufactures SS 304L Half Round Straight Tube Shields designed to protect straight sections of boiler and heat exchanger tubes from erosion, thermal fatigue, and corrosion caused by high-temperature gases and particulate matter. These shields are shaped to conform tightly to the outer tube surface, providing a protective barrier in high-wear zones. The SS 304L material offers excellent weldability and enhanced resistance to intergranular corrosion, making it ideal for shielding tubes in critical thermal environments. SS 304L Half Round Straight Tube Shield The SS 304L Half Round Straight Tube Shield is made from low-carbon austenitic stainless steel (304L), which minimizes carbide precipitation during welding and resists intergranular attack. This makes it especially useful for applications where welding is required during installation. The shield is installed over straight tube sections in boilers, superheaters, economizers, and steam processing equipment to extend tube life and reduce maintenance needs. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 304L Half Round Straight Tube Shields, offering reliable tube protection solutions for industrial heating and energy systems. Material Grade SS 304L – Low-carbon variant of austenitic stainless steel with enhanced corrosion resistance and weldability. Chemical Composition of SS 304L • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 12.0% • Iron (Fe): Balance Applications: Ideal for systems involving welding, elevated temperatures, and corrosive steam or gas exposure. Uses • Shielding straight tubes in boilers and superheaters • Protection of economizer tubes and reheaters • Used in heat recovery steam generators (HRSGs) • Applied in steam reformers and chemical processing units • Effective in pulp and paper recovery boilers and refinery heaters Features • Intergranular corrosion resistance – Low carbon content prevents sensitization and weld decay • High-temperature strength – Maintains integrity under prolonged heat and gas exposure • Extended tube life – Minimizes erosion, slag buildup, and surface damage • Custom sizing – Available in various diameters, thicknesses, and lengths to match tube dimensions • Simple installation – Mounts securely using clamps, welding, or metal banding • Reduced maintenance – Lowers the need for frequent inspection and tube replacement Applications • power generation – Shields straight tube segments in LTSH and superheater zones from flue gas erosion • petrochemical plants – Protects tubes in high-humidity, chloride, and acidic processing environments • industrial boilers – Enhances tube longevity in zones prone to fly ash and slag contact • waste heat recovery systems – Extends operational life under thermal cycling and gas turbulence • marine boilers – Ideal for use in steam systems aboard ships exposed to saline and humid conditions Conclusion The SS 304L Half Round Straight Tube Shield by Ladhani Metal Corporation provides a robust and corrosion-resistant solution for protecting straight tube sections in thermal processing units. With its low carbon content, superior weldability, and durable performance in high-temperature environments, it is an optimal choice for industries focused on efficiency, reliability, and long service life. For custom fabrication, project-specific designs, or technical support, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are specially engineered components used to safeguard boiler and heat exchanger tubes from damage due to high-temperature flue gases, particulate abrasion, and chemical scaling. Designed to fit over curved or straight tube surfaces, these shields are extensively used in power generation and industrial heating systems. The half-round design ensures streamlined installation and effective surface protection in high-wear regions. Cr25Ni20 Half Round Tube Shield for LTSH Tube The Cr25Ni20 Half Round Tube Shield is made from a high-temperature, high-chromium nickel alloy (containing approximately 25% chromium and 20% nickel) that offers superior resistance to oxidation, carburization, and sulfidation at elevated temperatures. This grade provides excellent mechanical stability and corrosion resistance, making it suitable for demanding environments such as Low Temperature Superheater (LTSH) zones in boilers. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of Cr25Ni20 Half Round Tube Shields for LTSH systems, delivering heat- and corrosion-resistant solutions to enhance the durability of superheater tubes. Chemical Composition of Cr25Ni20 – High-Temperature Chromium-Nickel Alloy • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Ideal for LTSH tubes in environments where protection against thermal fatigue, ash erosion, and high-temperature oxidation is critical. Uses • Shields LTSH tubes in coal-fired boilers and HRSGs from ash particle abrasion and flue gas scaling • Protects tube bends and convection sections in waste heat recovery boilers (WHRBs) • Suitable for industrial boilers in petrochemical plants and refineries • Extends the life of tubes in steam generators used in corrosive and high-heat zones • Effective in biomass plants, waste incineration boilers, and marine heating systems Features • Exceptional heat resistance – High chromium and nickel content ensures reliable performance in high-temperature boiler zones • Superior oxidation and corrosion resistance – Suitable for flue gas streams with corrosive components • Custom fabrication – Manufactured to match exact tube diameter, length, and curvature requirements • Easy to install – Supports weld-on, clamp-on, or banding installation methods • Enhances tube longevity – Reduces wear from fly ash, soot, and gas flow • Low maintenance – Helps reduce downtime and operational costs in heat exchanger and boiler systems Applications • thermal power plants – Protects LTSH tube surfaces from thermal degradation and ash erosion • chemical processing units – Shields process heater tubes from acidic and oxidizing gases • WHRBs and HRSGs – Used in tube bends and lower convection sections for abrasion and heat protection • petrochemical refineries – Ensures long service life of tubes under cyclic temperature exposure • waste-to-energy plants – Minimizes scaling and wear from contaminated flue gases Conclusion The Cr25Ni20 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a robust shielding solution for high-temperature, corrosion-prone environments in thermal and industrial boilers. Offering outstanding oxidation resistance, thermal stability, and structural integrity, these shields are designed to protect LTSH tubes and improve system efficiency and longevity. For technical support, sizing options, or order inquiries, contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-designed components used to protect boiler, superheater, and heat exchanger tubes from erosion, slag accumulation, scaling, and high-temperature oxidation. These shields are essential for industrial systems exposed to intense thermal cycling, high-velocity flue gases, and corrosive atmospheres. Their half-round form ensures quick and secure installation over curved or straight tube surfaces, significantly enhancing tube durability and reducing downtime. 1Cr20Ni14Si2 U Type Outer Half Round Tube Shield The 1Cr20Ni14Si2 U Type Outer Half Round Tube Shield is made from a high-performance austenitic stainless steel alloy containing 20% chromium, 14% nickel, and approximately 2% silicon. This alloy provides excellent resistance to oxidation, high-temperature corrosion, and thermal fatigue, especially in oxidizing and carburizing environments. The outer U-type design is specifically intended to protect the outer arc of U-bend tubes in boilers, reformers, and heat exchangers, where flame, gas flow, and slag buildup cause the most wear. • Outer U Type Half Round Tube Shield – Shields the outer curvature of U-bend tubes from flame impingement, gas erosion, slag attack, and thermal scaling. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of 1Cr20Ni14Si2 U Type Outer Half Round Tube Shields, offering custom-built shielding solutions for critical high-temperature and industrial systems. Chemical Composition of 1Cr20Ni14Si2 – Austenitic Heat-Resistant Stainless Steel • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.50 – 2.50% • Chromium (Cr): 19.0 – 21.0% • Nickel (Ni): 13.0 – 15.0% • Iron (Fe): Balance Applications: Best suited for high-temperature, oxidizing environments in power generation, chemical processing, and furnace systems where excellent thermal and scaling resistance are required. Uses • Outer arc protection for U-bend tubes in superheaters and reheaters in thermal power plants • Shields return bends in heat exchangers and steam reformers exposed to hot gases and flame • Used in waste heat recovery boilers (WHRBs) and HRSGs to prevent surface oxidation and slag damage • Suitable for petrochemical and chemical reactors operating under oxidizing or mildly carburizing conditions • Applied in high-temperature industrial furnaces, incinerators, and reforming equipment Features • Excellent high-temperature resistance – Withstands service temperatures up to 1100°C with minimal deformation or scaling • Oxidation and corrosion resistance – High Cr-Ni-Si composition forms a stable oxide layer for prolonged exposure protection • Outer bend coverage – Provides critical protection for the most exposed and erosion-prone section of U-bend tubes • Custom fabrication – Manufactured to match exact tube radius and diameter, ensuring a precise and stable fit • Easy installation – Secured with clamps, tack welds, or stainless steel banding without disassembly • Long-lasting performance – Enhances operational life and minimizes costly tube replacements in aggressive environments Applications • thermal and power generation – Protects outer U-bend tube surfaces from slag, soot, and flue gas corrosion • petrochemical and refining – Shields return bends in reformers and heaters exposed to oxidizing and sulfur-rich gases • waste heat recovery – Guards outer tube arcs in WHRBs and HRSGs against scaling and erosion • metallurgy and cement processing – Used in high-temperature pipelines and ducts in furnaces and kilns • process heating systems – Ideal for environments involving intense flame exposure and cyclic thermal loads Conclusion The 1Cr20Ni14Si2 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a highly durable, heat-resistant shielding solution for protecting U-bend tube outer surfaces in extreme industrial environments. With superior resistance to oxidation, scaling, and thermal fatigue, it ensures long-term reliability and efficiency in power plants, reformers, and furnace systems. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-crafted protective components used to shield boiler and heat exchanger tubes from high-temperature oxidation, slag accumulation, erosion, and thermal fatigue. These shields are essential in industrial systems where tubes are exposed to flue gases, particulate flow, and repeated heating cycles. Their half-round design enables efficient and secure installation over straight or curved tube sections, significantly extending tube life and reducing maintenance frequency. 1Cr25Ni20Si2 U Type Outer Half Round Tube Shield The 1Cr25Ni20Si2 U Type Outer Half Round Tube Shield is manufactured from a high-temperature resistant austenitic alloy containing 25% chromium, 20% nickel, and 2% silicon. This combination offers excellent oxidation resistance, strong thermal stability, and enhanced anti-scaling performance at elevated temperatures. Designed specifically to cover the outer arc of U-bend tubes, this shield protects surfaces most exposed to hot gases, flame impingement, and corrosive particles in demanding thermal environments. • Outer U Type Half Round Tube Shield – Protects the external arc of U-bend tubes from direct exposure to slag, high-velocity flue gas, and oxidizing atmospheres. Ladhani Metal Corporation is a reputed manufacturer, supplier, and exporter of 1Cr25Ni20Si2 U Type Outer Half Round Tube Shields, offering durable and heat-resistant solutions for thermal, petrochemical, and metallurgical applications. Chemical Composition of 1Cr25Ni20Si2 – Austenitic Heat-Resistant Alloy • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.50 – 2.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Best suited for environments requiring resistance to oxidation, thermal cycling, and high-temperature corrosion, especially in furnaces and exhaust systems. Uses • Outer arc protection of U-bend tubes in reheaters and superheaters exposed to slag, flame, and flue gas in power plants • Shielding external curves of return bends in waste heat recovery units (WHRBs) and HRSGs • Applied in radiant coils and heat exchanger bends operating in high-temperature industrial furnaces • Suitable for petrochemical processing units, steam reformers, and chemical heaters handling oxidizing or carburizing gases • Ideal for high-heat metallurgical and cement kiln systems requiring thermal fatigue and scale resistance Features • Excellent high-temperature oxidation resistance – High chromium and silicon content forms a stable protective scale layer • Enhanced anti-scaling performance – Withstands prolonged exposure to oxidizing environments up to 1150°C • Outer bend protection – Shields the most exposed section of U-bend tubes from erosion, slag, and thermal impact • Precision fitment – Custom-made to match tube radius and diameter for secure, rattle-free installation • Easy to install – Secured by clamps, stainless steel bands, or tack welding without disassembling the system • Long operational lifespan – Reduces tube wear and replacement frequency in aggressive thermal service conditions Applications • power generation – Used on U-bend outer arcs in superheaters and reheaters for oxidation and slag protection • petrochemical plants – Shields tube bends in reformers and high-temperature heaters exposed to process gas erosion • waste heat recovery boilers – Installed in WHRBs and HRSGs operating under fluctuating temperatures and gas flow • cement and metallurgy industries – Protects curved tubes and heat exchanger bends exposed to high-temperature dust and gas streams • furnace and incineration systems – Applied to outer arcs in radiant coils subjected to direct flame and extreme heat Conclusion The 1Cr25Ni20Si2 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a high-performance shielding component designed for the most demanding high-temperature industrial environments. With its superior oxidation resistance, scale protection, and thermal fatigue strength, it provides lasting protection to U-bend tubes in boilers, furnaces, and heat exchangers across the power, petrochemical, and metallurgical sectors. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered protective sleeves designed to prevent wear, oxidation, and erosion of boiler and heat exchanger tubes. These shields enhance the durability and reliability of tubing systems exposed to high temperatures, flue gases, and mechanical abrasion. Their half-round structure allows easy installation and targeted protection without disrupting the tube layout. SS 310S U Type Half Round Tube Shield The SS 310S U Type Half Round Tube Shield is specifically designed for protecting curved (U-bend) and adjoining straight sections of tubes in boilers, superheaters, and heat exchangers. Made from SS 310S, a low-carbon variation of stainless steel 310, this shield offers superior resistance to high-temperature oxidation and intergranular corrosion, especially in welded structures. The U-shaped profile ensures a snug fit over return bends, where thermal fatigue and erosion are most severe. Shields are available in both inner and outer U configurations to provide full protection. • Outer U Type Half Round Tube Shield – Covers the external curvature of U-bend tubes, shielding against heat, slag, and gas erosion. • Inner U Type Half Round Tube Shield – Protects the internal arc of the bend from turbulence, hot spots, and corrosive attack. Ladhani Metal Corporation is a reputed manufacturer and exporter of SS 310S U Type Half Round Tube Shields, offering reliable tube protection solutions tailored to industry-specific needs. Chemical Composition of SS 310S – Low Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Well-suited for high-temperature operations involving welding or thermal cycling where resistance to oxidation and intergranular corrosion is critical. Uses • U-bend protection in superheater and reheater coil loops • Furnace coil shielding in petrochemical and refining systems • High-temperature tube bend coverage in WHRBs and HRSGs • Erosion protection for tube bends in steam reformers and reactors • Surface preservation in boilers, incinerators, and cement kilns Features • High-temperature performance – Made from SS 310S, offering excellent resistance to oxidation, scaling, and thermal corrosion in environments up to 1100°C. • Low carbon advantage – Reduced carbon content minimizes the risk of intergranular corrosion after welding, ideal for high-temperature welded structures. • Complete U-bend protection – Available in inner and outer U-type configurations to shield both sides of the tube bend from erosion and heat damage. • Accurate fitment – Custom-formed to the exact tube radius and diameter for a snug, secure fit that resists vibration and thermal stress. • Durable under thermal cycling – Maintains shape and mechanical strength under repeated heating and cooling, reducing the chance of failure. • Multiple finish options – Supplied in pickled, passivated, or bright annealed finishes to enhance surface resistance and service life. • Easy installation – Designed for simple on-site clamping, welding, or banding without disassembling existing tube arrangements. • Fully customizable – Available in various thicknesses, lengths, and radii to match specific boiler, exchanger, or furnace system requirements. Applications • thermal power plants – Used to protect U-bend tubes in superheaters and reheaters. Ensures resistance to scaling, oxidation, and high flue gas temperatures. • petrochemical refineries – Shields return bends in reformers and heat exchangers. Maintains performance under carburizing and oxidizing conditions. • waste heat recovery systems (WHRBs) – Guards curved tubes against ash, slag, and gas turbulence. Increases tube life in high-temperature waste gas environments. • chemical and fertilizer plants – Used in high-temperature reactors and ammonia processing lines. Prevents tube damage from corrosive gases and thermal fatigue. • HRSGs and boilers – Installed on coil bends in steam generator systems. Enhances system reliability under rapid heating and cooling cycles. Conclusion The SS 310S U Type Half Round Tube Shield by Ladhani Metal Corporation is engineered for long-term performance in high-temperature, corrosive, and welded environments. With its low carbon content and excellent resistance to oxidation, it is ideal for protecting curved tube sections in critical systems. Designed for easy installation and custom fit, these shields extend the service life of boiler and exchanger tubes while minimizing maintenance. As a trusted manufacturer and exporter, Ladhani Metal Corporation delivers tube protection solutions tailored to your application. For specifications, material selection, or custom inquiries, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-formed protective components used to shield exposed tubes in boilers, heat exchangers, and high-temperature piping systems. Designed to withstand harsh environments, they provide long-term protection against corrosion, erosion, and thermal damage, significantly improving the operational life and reliability of industrial systems. SS 316 Half Round Tube Shield The SS 316 Half Round Tube Shield is a semi-cylindrical cover made from austenitic stainless steel grade 316. Known for its superior corrosion resistance and mechanical strength, SS 316 is especially effective in chloride-rich environments such as marine, chemical, and coastal processing industries. The shield is engineered to fit over existing tubes, acting as a barrier against high-temperature gases, steam erosion, and corrosive media. Its molybdenum-enriched composition enhances pitting and crevice corrosion resistance, making it ideal for aggressive applications. Chemical Composition of SS 316 – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Uses • Boiler Tube Protection – Provides a robust shield against corrosive flue gases, preventing tube thinning and extending service intervals in industrial boilers. • Heat Exchanger Tube Protection – Reduces erosion and scaling in process systems exposed to fluctuating temperatures and aggressive fluids. • Marine and Coastal Applications – Ideal for protecting piping and steam lines in saltwater environments where chloride-induced corrosion is a major concern. • Chemical Process Tubing – Shields tubes exposed to acidic or caustic compounds, minimizing localized corrosion and chemical wear. • Pharmaceutical and Food Plants – Protects steam and utility tubes while maintaining hygiene and resistance to cleaning agents and sanitizers. Features • Excellent Corrosion Resistance – Molybdenum addition enhances resistance to pitting, crevice corrosion, and chemical attack. • High Strength and Durability – Withstands mechanical stress and thermal cycling without deformation or degradation. • Precision Fit – Half-round profile allows easy installation and secure fitting over tubes with minimal disruption to system performance. • Hygienic Material – Non-reactive and easy to clean, suitable for environments requiring sanitary conditions. • Customizable – Available in a variety of wall thicknesses, diameters, lengths, and mounting styles to meet specific operational needs. • Optional Finishes – Pickled, passivated, and bright annealed surface finishes available for improved appearance and added protection. Applications • Power Generation Boilers – Used in high-pressure steam systems to shield tubes from gas erosion and oxidation. • Chemical Processing Units – Protects tubes in acidic, alkaline, and oxidizing environments across chemical plants and refineries. • Marine Boilers and Engines – Installed on tubes and exhaust lines in marine vessels to resist chloride-induced corrosion. • Pharmaceutical Facilities – Suitable for clean steam systems and sterile environments requiring high resistance to chemical sanitizers. • Food and Beverage Industry – Used in pasteurization, CIP lines, and steam piping where corrosion resistance and cleanliness are essential. • Desalination Plants – Guards tubing systems in brine and saltwater processing units against aggressive corrosion and scaling. Conclusion The SS 316 Half Round Tube Shield by Ladhani Metal Corporation is an advanced protective solution for critical tubing systems operating in corrosive and high-temperature environments. Its enhanced chemical resistance, mechanical strength, and adaptability to sanitary and marine conditions make it an ideal choice for industries requiring long-term reliability and safety. Designed with precision and manufactured to meet strict industrial standards, these shields ensure prolonged tube life, reduced downtime, and improved system performance. Custom-fabricated to match your application, Ladhani Metal Corporation provides dependable shielding solutions trusted across industries worldwide. For detailed specifications, inquiries, or custom orders, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are specially designed components used to protect boiler and heat exchanger tubes from erosion, wear, and high-temperature damage. Manufactured with precision and expertise, these shields ensure enhanced tube life, reduced maintenance, and efficient operation in demanding industrial environments. SS 304L Half Round Tube Shield The SS 304L Half Round Tube Shield is a semi-circular protective cover made from high-quality stainless steel grade 304L. It is widely used in thermal and mechanical systems where tube surfaces are exposed to harsh operating conditions. The lower carbon content in SS 304L offers enhanced weldability and minimizes the risk of carbide precipitation, making it ideal for high-temperature and corrosive environments. The half-round design allows for easy installation over tubes while ensuring robust protection from flue gases, abrasives, and thermal stress. Manufactured using stainless steel grade 304L, these half-round tube shields are semi-cylindrical covers that are clamped or welded over exposed tubes. The “L” in SS 304L denotes “Low Carbon,” which offers improved resistance to sensitization during welding or prolonged exposure to elevated temperatures, making it more suitable for high-temperature and corrosive conditions compared to standard SS 304. The shields are formed with precision to ensure a snug fit over tubes and provide maximum protection without disrupting heat transfer or fluid flow. Chemical Composition of SS 304L – Austenitic Stainless Steel • Carbon (C): ≤ 0.030% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 12.0% • Iron (Fe): Balance Applications: Widely used in boilers, heat exchangers, steam lines, and furnaces due to its excellent corrosion resistance, weldability, and performance in high-temperature service conditions. Uses – SS 304L Half Round Tube Shield • Boiler Tube Protection – Used to safeguard boiler tubes from high-temperature flue gases, ash erosion, and abrasive particles, ensuring extended service life and reduced downtime. • Heat Exchanger Tube Shielding – Protects heat exchanger tubes from corrosive process fluids and turbulent flow, helping to maintain performance and reduce maintenance frequency. • Furnace Gas Flow Wear Prevention – Installed in furnace environments where high-velocity gases and thermal cycling can cause severe tube wear, acting as a durable barrier. • Petrochemical & Refinery Applications – Shields critical tubing in high-temperature and chemically aggressive environments, improving resistance to oxidation and corrosion. Applications – SS 304L Half Round Tube Shield • Thermal Power Stations – Ideal for boiler systems and superheater tubes exposed to extreme thermal and flow conditions. • Refineries & Petrochemical Plants – Used in cracking units, reformers, and reactors where temperature and corrosion challenges are common. • Heat Recovery Steam Generators (HRSGs) – Enhances protection of tubes in combined cycle power plants and improves system reliability. • Chemical Processing Units – Prevents corrosion and surface degradation in harsh chemical flow environments. • Pulp and Paper Industry – Protects process tubes in digesters, recovery boilers, and steam-generating systems. • Industrial Boilers and Steam Systems – Ensures long-lasting tube integrity in high-pressure and high-temperature steam applications. Benefits • Extended Tube Life: Reduces repair frequency and tube replacement cycles. • Cost Efficiency: Minimizes downtime and maintenance-related expenses. • Reliable Performance: Maintains mechanical integrity under fluctuating temperatures and pressure conditions. • Sustainability: Enhances energy efficiency by maintaining consistent heat transfer performance. Conclusion The SS 304L Half Round Tube Shield by Ladhani Metal Corporation is an ideal solution for protecting critical tube systems in aggressive and high-temperature environments. Designed for high performance and long-lasting reliability, these shields help extend the lifespan of tubing systems while reducing downtime and maintenance costs. With customizable options, premium materials, and expert fabrication, Ladhani Metal Corporation is your trusted partner in tube protection solutions. For more details, inquiries, or to request a quote, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are specially designed components used to protect boiler and heat exchanger tubes from erosion, wear, and high-temperature damage. Manufactured with precision and expertise, these shields ensure enhanced tube life, reduced maintenance, and efficient operation in demanding industrial environments. SS 304 Half Round Tube Shield The SS 304 Half Round Tube Shield is a semi-circular protective cover made from high-quality stainless steel grade 304. It is widely used in thermal and mechanical systems where tube surfaces are exposed to harsh operating conditions. The half-round design allows for easy installation over the tubes while providing robust protection against flue gases, abrasives, and thermal stress. Chemical Composition of SS 304 – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Iron (Fe): Balance Applications: Widely used in boilers, heat exchangers, steam lines, and furnaces due to its excellent corrosion resistance, oxidation resistance, and durability in high-temperature environments. Uses Half Round Tube Shields are essential components in a wide range of thermal and mechanical systems. Their primary function is to protect exposed tube surfaces from damage caused by high-temperature operations, abrasive flow, and chemical environments. Common uses include: Boiler tube protection in thermal and power plants, where shields guard against ash erosion, slagging, and flame impingement. Shielding heat exchanger tubes from erosion and corrosion caused by turbulent gas flow and aggressive operating media. Preventing mechanical wear from high-velocity gas flow in furnace and combustion systems, especially in radiant heat zones. Providing long-term protection for high-temperature tubing in petrochemical and refinery systems, helping to reduce downtime and costly tube replacements. These shields serve as a barrier between the harsh environment and the structural tube surface, thereby improving operational safety, minimizing maintenance, and extending the service life of critical equipment. Features Ladhani Metal Corporation designs and manufactures Half Round Tube Shields with features that ensure long-term reliability, precise fit, and consistent performance even in the most challenging environments: Material: Made from high-grade stainless steel 304, offering excellent resistance to corrosion, oxidation, and heat-related stress. Design: Formed into a precise half-round shape to ensure full coverage and a secure fit over the outer curvature of tubes. Finish: Available in bright annealed, pickled & passivated, or other surface finishes as per client requirements for enhanced surface integrity and aesthetic appeal. Durability: Built with strong mechanical properties to withstand erosion, impact, and thermal cycling over prolonged use. Custom Sizes: Manufactured in a variety of thicknesses, lengths, and diameters to match specific tube dimensions and installation needs. Applications: Thermal Power Stations, where boiler tubes are continuously exposed to high heat and fly ash. Refineries and Petrochemical Plants, where process gases and liquids can be corrosive and erosive. Heat Recovery Steam Generators (HRSGs), where shields protect tubes during the waste heat recovery process. Chemical Processing Units, where exposure to reactive media necessitates strong material protection. Pulp and Paper Industry, particularly in recovery boilers and steam-generating systems. Industrial Boilers and Steam Systems that require reliable tube integrity for safe and efficient operation. These shields are critical to maintaining the integrity and efficiency of equipment in heavy-duty industrial systems. Conclusion The SS 304 Half Round Tube Shield by Ladhani Metal Corporation is a trusted solution for protecting vital tube systems in aggressive and high-temperature environments. Engineered for performance and longevity, these shields not only extend the life of your tubing systems but also minimize downtime and maintenance costs. With customizable dimensions, superior raw material, and precision forming, Ladhani Metal Corporation stands as a dependable partner for all your tube protection requirements. For more details, inquiries, or to request a quote, please contact Ladhani Metal Corporation.

What is a Half Round Tube Shield? A Half Round Tube Shield is a specially designed metal cover that fits over the external curvature of tubes or pipes. It is commonly used in boilers, heat exchangers, and various high-temperature piping systems to prevent damage caused by erosion, corrosion, high-velocity gas flow, and thermal fatigue. These shields serve as a first line of defense by absorbing mechanical and chemical wear, thereby significantly extending the life of the underlying tubes. Tube shields are essential in high-stress areas where exposure to combustion gases, ash particles, or high-velocity steam can quickly degrade unprotected surfaces. By preventing direct impact on the base metal, they help reduce operational downtime, lower maintenance costs, and prevent unexpected system failures. In boiler systems, tube shields are especially important to avoid tube thinning and ruptures, ensuring safer and more efficient operation. Product Overview At Ladhani Metal Corporation, we manufacture and supply premium-quality Half Round Tube Shields for a wide range of industrial applications. Our products are known for their dimensional accuracy, durability, and superior resistance to wear and corrosion. Designed for harsh operating environments, our tube shields can be customized in terms of thickness, radius, length, and grade to suit specific operating requirements. Whether you require protection for straight tubes, bends, or special boiler tube configurations, we have a solution tailored for you. Available Grades We manufacture Half Round Tube Shields using high-performance stainless steel and alloy steel grades that are selected based on their mechanical strength, temperature tolerance, and corrosion resistance. Stainless Steel Grades: • SS 304, SS 304L • SS 316, SS 316L • SS 310, SS 310S • SS 410, SS 420, SS 430 Heat-Resistant & Alloy Steel Grades: • 1Cr18Ni9Ti • Cr25Ni20 • 1Cr25Ni20Si2 • Cr23Ni13 • 1Cr20Ni14Si2 • 1Cr13 These materials ensure the shields can withstand aggressive media, thermal cycling, and high-velocity particulate flow without cracking or deforming over time. Types of Half Round Tube Shields We offer various forms of Half Round Tube Shields to match different tube geometries and boiler configurations: • U-Type Half Round Tube Shield Designed to cover both the top and sides of the tube, offering extended protection in U-bend areas where wear is most common. • U-Type Outer Half Round Tube Shield Specifically shaped to shield the outer curvature of U-bend tubes, ideal for areas exposed to direct flame or gas flow. • U-Type Inner Half Round Tube Shield Fits the inner curvature of U-bend tubes to protect against erosion caused by high-velocity media turning around the bend. • Half Round Tube Shield for LTSH Type Custom-made to fit tubes in Low Temperature Super Heater (LTSH) sections, providing protection from ash and flue gases. • Half Round Straight Tube Shield Standard half-round shields used for straight tube sections, offering easy installation and effective protection. • Half Round Tube Shield for R/H Tube Designed for Reheater (R/H) tubes, typically found in high-temperature zones; made from heat-resistant materials. • Half Round Shield for Tube A general-purpose shield suitable for various industrial tubes requiring surface protection. • Half Round Tube Shield for WW Screen Engineered to fit water wall screen tubes, protecting against slagging and high radiant heat. • Half Round Tube Shield for Boiler Tube Specifically designed for boiler applications, these shields reduce wear cau Each type is designed for easy integration into existing boiler or piping systems, whether for repair, reinforcement, or preventive maintenance. Key Features ✔ High Durability – Effectively resists erosion, mechanical abrasion, scaling, and chemical attack ✔ Accurate Half-Round Fit – Custom-formed to ensure close contact and full protection of tube surface ✔ Weld-On or Clip-On Installation – Offers flexibility based on site requirements and installation methods ✔ Custom Sizes Available – Tailored to meet specific pipe diameters, wall thicknesses, and operating conditions ✔ Corrosion & Heat Resistance – Performs reliably under prolonged exposure to high temperatures and corrosive flue gases Conclusion Half Round Tube Shields by Ladhani Metal Corporation provide robust protection for critical tubing in boilers, heat exchangers, and high-temperature piping systems. Manufactured with a focus on performance, longevity, and ease of installation, these shields are a dependable solution for industrial operators aiming to enhance system reliability and reduce unplanned maintenance. 📩 Get in touch with us today for customized solutions, bulk order pricing, or technical consultations tailored to your specific industry requirements.