DIN 2627 Monel flanges PN 400 are high-performance blind flanges crafted for ultra-high-pressure systems where superior corrosion resistance, durability, and structural integrity are critical. Compliant with the DIN 2627 standard, these flanges are specifically designed to close off the ends of pipelines in extreme service environments, including highly corrosive marine atmospheres, acidic and alkaline chemical processes, and high-temperature applications. With a PN 400 rating (400 bar / 5800 psi), these flanges ensure leak-free operation under intense pressure and challenging conditions. Made from Monel alloys—primarily Monel 400 and Monel K500—these flanges are widely utilized in offshore oil rigs, naval applications, chemical processing, and power generation systems. Ladhani Metal Corporation is a global leader in manufacturing and exporting DIN-standard Monel flanges, ensuring compliance with international requirements for pressure containment, corrosion resistance, and metallurgical consistency. Pressure Rating: • PN 400 (400 bar / 5800 psi): Engineered for extremely high-pressure piping systems in critical and hazardous service environments where reliable sealing is essential. Flange Type: • Blind Flanges Solid, non-bored flanges used to seal piping systems or terminate flow paths. Ideal for pressure testing, system isolation, and future expansion. • Flat Face (FF) Flanges Designed with a flat sealing surface for use with full-face gaskets and flat mating components. Ensures uniform load distribution and optimal sealing performance. Monel Grades and Composition: Monel 400 (UNS N04400) • Nickel (Ni): ≥ 63% • Copper (Cu): 28 – 34% • Iron (Fe): ≤ 2.5% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% Applications: Outstanding resistance to seawater, hydrofluoric acid, alkalis, and other corrosive media. Widely used in marine equipment, chemical processing, and heat exchangers. Monel K500 (UNS N05500) • Nickel (Ni): ≥ 63% • Copper (Cu): 27 – 33% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2% • Carbon (C): ≤ 0.25% Applications: Combines the corrosion resistance of Monel 400 with enhanced strength and hardness. Suitable for high-stress components like shafts, valve parts, and pump systems in corrosive environments. Applications of DIN 2627 Monel Flanges PN 400: • Offshore Oil and Gas Platforms Ideal for subsea systems exposed to high salinity, pressure, and corrosive gases such as hydrogen sulfide. • Marine and Shipbuilding Preferred in piping systems, ballast lines, and propulsion equipment exposed to seawater and biofouling agents. • Chemical and Petrochemical Plants Used in process systems handling caustic solutions, hydrofluoric acid, and strong alkalis at elevated pressures. • Heat Exchangers and Condensers Excellent thermal conductivity and corrosion resistance make Monel suitable for harsh thermal cycling conditions. • Nuclear and Power Generation Resilient in high-radiation and chemical-laden environments found in cooling systems and high-pressure steam lines. • Aerospace and Defense Used in fuel and hydraulic lines where strength and resistance to high-pressure corrosive media are critical. Key Features: • Manufactured according to DIN 2627 standards • Rated for PN 400 high-pressure operations • Blind flange design ensures reliable sealing and flow isolation • Flat face configuration for full-face gasket compatibility • Available in Monel 400 and Monel K500 grades • Exceptional resistance to corrosion by seawater, acids, and alkalis • High strength and durability in extreme service environments • Widely used in marine, chemical, nuclear, oil and gas, and aerospace industries • Custom configurations, sizes, and material options available on request Conclusion: DIN 2627 Monel Flanges PN 400 from Ladhani Metal Corporation are engineered for mission-critical applications where long-term durability, corrosion resistance, and high-pressure performance are mandatory. Whether you need protection against seawater, alkalis, or aggressive process chemicals, these flanges provide robust, leak-free service in the harshest operating environments. Contact Ladhani Metal Corporation for expert guidance, custom engineering, and dependable supply of Monel flange solutions tailored to your specific needs

DIN 2576 Monel Flanges PN 10 are high-integrity, slip-on flanges manufactured from corrosion-resistant nickel-copper alloys, specifically designed for demanding low to medium-pressure applications. Compliant with the DIN 2576 standard, these flanges provide exceptional resistance to seawater, acids, alkalis, and corrosive chemicals, making them ideal for highly corrosive industrial environments. The slip-on design allows the flange to be positioned over the pipe and welded in place, ensuring precise alignment and long-term mechanical stability. Ladhani Metal Corporation is a trusted manufacturer and international supplier of Monel flanges, producing components that meet rigorous dimensional, metallurgical, and quality standards. DIN 2576 Monel flanges are widely used in marine, chemical, and oil and gas industries, where material durability and corrosion resistance are critical. Pressure Rating: • PN 10 (10 bar / 145 psi): Designed for systems requiring stable operation under moderate pressures in fluid and gas transport environments. Flange Types: • Slip-On Flanges Facilitate easy assembly by slipping over the pipe and welding on both sides to ensure a leak-proof and secure joint. • Flat Face (FF) Flanges Designed for use with flat gaskets and mating surfaces, offering even pressure distribution and sealing performance, particularly with brittle or non-metallic materials. Monel Grades and Composition: Monel 400 (UNS N04400) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe), Manganese (Mn), Silicon (Si), Carbon (C): Trace amounts Applications: Monel 400 is well-known for its outstanding resistance to seawater, hydrofluoric acid, sulfuric acid, and alkalis. It is widely used in marine engineering, chemical processing, and heat exchangers. Monel K500 (UNS N05500) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): ~30.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% Applications: Monel K500 offers the same corrosion resistance as Monel 400 but with significantly higher strength and hardness due to age-hardening. It is ideal for high-stress applications such as pump shafts, valve components, and marine fasteners. Applications of DIN 2576 Monel Flanges: • Marine and Offshore Engineering Ideal for seawater exposure, ballast systems, and structural applications in shipbuilding and offshore platforms. • Chemical and Petrochemical Processing Used in piping systems exposed to strong acids, caustics, and other corrosive agents. • Oil and Gas Industry Suitable for sour gas (H₂S) environments, offshore drilling equipment, and refining systems. • Heat Exchangers and Condensers Monel's thermal conductivity and corrosion resistance make it suitable for tube sheets and connecting flanges. • Power Generation Applied in cooling systems, boiler feedwater lines, and other aggressive service environments. • Aerospace and Defense Used in fuel and hydraulic systems where resistance to corrosion and stress cracking is required. Key Features: • Manufactured according to DIN 2576 specification • PN 10 pressure rating for low to medium-pressure fluid systems • Exceptional resistance to seawater, acids, alkalis, and chlorides • Available in Monel 400 and Monel K500 grades • Slip-on design enables easy installation and welding • Flat face versions for compatibility with flat gaskets and brittle materials • Excellent mechanical properties and corrosion resistance • Custom dimensions, finishes, and face types available upon request Conclusion: DIN 2576 Monel Flanges PN 10 from Ladhani Metal Corporation deliver high corrosion resistance and mechanical strength for aggressive environments where conventional materials fail. With availability in Monel 400 and K500 grades, these flanges are suitable for marine, oil & gas, and chemical applications. For technical support, project consultation, or custom orders, contact Ladhani Metal Corporation today.

DIN 2569 Monel Flanges PN 100 are precision-engineered welding neck flanges manufactured from high-grade Monel alloys, specifically designed for high-pressure and highly corrosive environments. Built to DIN 2569 standards, these flanges offer excellent resistance to seawater, acids, and alkalis, along with superior mechanical strength and durability. Their robust performance makes them ideal for critical applications in marine engineering, chemical processing, oil and gas, and offshore industries. Ladhani Metal Corporation is a leading manufacturer and exporter of Monel flanges, offering reliable and high-quality products that meet stringent international standards. The welding neck configuration ensures permanent, high-strength connections suitable for continuous operation under high pressure and temperature conditions. Pressure Rating: • PN 100 (100 bar / 1450 psi): Specifically designed for high-pressure systems requiring outstanding corrosion resistance, sealing integrity, and mechanical performance in aggressive and demanding environments. Flange Types: • Welding Neck Flanges Provide high-strength welded connections for pressurized piping systems exposed to thermal expansion and vibration. • Raised Face (RF) Flanges Enhance gasket compression and sealing performance in high-pressure and temperature applications. • Flat Face (FF) Flanges Used in applications with flat mating surfaces, particularly when connecting to brittle or non-metallic materials. • Forged Welding Neck Flanges Offer high mechanical strength, dimensional accuracy, and durability. • Custom-Machined Flanges Available in various sizes, pressure classes, and Monel grades as per customer requirements. Monel Grades and Composition: 1. Monel 400 (Nickel-Copper Alloy) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): ≤ 2.5% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.30% Applications: Used in marine engineering, chemical processing, and fuel or freshwater tanks due to its excellent resistance to seawater, hydrofluoric acid, and stress corrosion cracking. 2. Monel K500 (Precipitation-Hardened Alloy) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% Applications: Ideal for applications requiring high strength and corrosion resistance, such as pump shafts, oil well tools, and marine components. K500 offers greater mechanical strength and hardness compared to Monel 400. Applications of DIN 2569 Monel Flanges: • Marine and Offshore Engineering: Perfect for underwater, saltwater, and coastal applications due to excellent seawater and corrosion resistance. • Chemical and Petrochemical Industries: Used in acid and alkali handling systems, heat exchangers, and reactors where corrosion resistance is crucial. • Oil and Gas Sector: Employed in valves, pipes, and flanges exposed to sour gas and offshore drilling conditions. • Power Generation: Suitable for condenser tubing and heat exchangers in environments where both corrosion and high temperature are factors. • Aerospace and Defense: Used in high-performance components requiring durability, resistance to aggressive chemicals, and thermal stability. Key Features: • Manufactured to DIN 2569 standard • Available in PN 100 pressure rating • Excellent corrosion resistance in acidic and marine environments • High mechanical strength and thermal stability • Permanent welded neck design for secure pipe integration • Supplied with test certifications and complete traceability • Custom machining and finishing available including pickling and passivation Conclusion: DIN 2569 Monel Flanges PN 100 from Ladhani Metal Corporation are engineered for critical operations that demand corrosion resistance, strength, and durability under pressure. These flanges are trusted in marine, chemical, and energy sectors, delivering dependable service in the most challenging environments. For tailored specifications, material consultations, or bulk orders, reach out to Ladhani Metal Corporation today.

DIN 2568 Monel Flanges PN 64 are high-integrity threaded flanges manufactured from corrosion-resistant Monel alloys, designed to perform reliably under high pressure and in highly corrosive environments. Built in accordance with DIN 2568 standards, these flanges offer outstanding resistance to seawater, acids, and alkalis, while maintaining high mechanical strength and thermal stability. They are ideally suited for use in marine, chemical, oil and gas, and offshore applications where both durability and corrosion performance are critical. Ladhani Metal Corporation is a recognized manufacturer and exporter of Monel flanges, offering components that conform to global industry specifications. The threaded design facilitates easy, weld-free installation and disassembly, making them ideal for systems requiring frequent maintenance or rapid assembly in corrosive environments. Pressure Rating: • PN 64 (64 bar / 928 psi): Specially engineered for high-pressure systems exposed to aggressive chemical environments, ensuring mechanical integrity and long service life. Flange Types: • Threaded (Screwed) Flanges Enable efficient, non-welded installation and maintenance in high-corrosion environments. • Raised Face (RF) Flanges Improve gasket sealing performance in systems with pressure and temperature variations. • Flat Face (FF) Flanges Suited for connections with flat-faced components, ensuring uniform gasket load distribution. • Forged Threaded Flanges Provide enhanced strength, dimensional precision, and resistance to corrosion. • Custom-Machined Flanges Available in a variety of sizes, pressure ratings, and Monel grades to suit specific application needs. Available Monel Grades and Composition: 1. Monel 400 (UNS N04400) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): 2.0 – 2.5% • Manganese (Mn): ≤ 2.0% Applications: Commonly used in marine engineering, chemical processing, and hydrocarbon systems for its excellent resistance to saltwater, hydrofluoric acid, and stress corrosion cracking. 2. Monel K500 (UNS N05500) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% Applications: Ideal for high-strength applications such as pump shafts, marine fasteners, and heat exchangers, combining the corrosion resistance of Monel 400 with increased hardness and tensile strength. Applications of DIN 2568 Monel Flanges: • Marine and Offshore Systems Used in seawater piping, ballast systems, and marine heat exchangers. • Chemical and Petrochemical Plants Resistant to acidic and alkaline media in processing plants and reactors. • Oil and Gas Industry Applied in sour gas service, separators, and wellhead systems. • Power Generation Installed in condensers, boilers, and cooling systems exposed to aggressive fluids. • Aerospace and Heat Treatment Suitable for exhaust systems, fixtures, and salt bath environments. Key Features: • Conforms to DIN 2568 standard • Rated for PN 64 high-pressure service • Exceptional resistance to seawater, acids, and alkalis • High strength, ductility, and fatigue resistance • Threaded design allows for fast, weld-free installation and disassembly • Supplied with test certificates, material traceability, and quality documentation • Available with custom machining, finishing, and dimensional options Conclusion: DIN 2568 Monel Flanges PN 64 from Ladhani Metal Corporation offer an optimal solution for high-pressure systems operating in chemically aggressive or marine environments. With superior mechanical performance and corrosion resistance, Monel 400 and K500 flanges provide long-lasting service life in demanding applications. For technical support, grade selection, or custom orders, contact Ladhani Metal Corporation today

Ladhani Metal Corporation is a prominent manufacturer and exporter of DIN 2565 Monel flanges, designed for high-performance, corrosion-resistant connections in low-pressure piping systems. Manufactured in accordance with DIN 2565 standards and typically available with a PN 6 pressure rating, these threaded flanges are ideal for systems where welding is not suitable or required. Monel flanges are made from a group of nickel-copper alloys that offer excellent resistance to seawater, acids, and alkalis. Known for their durability, strength, and exceptional corrosion resistance, Monel flanges are widely used in marine, chemical, and oil & gas industries where harsh operating environments are common. Flange Types: • Threaded (Screwed) Flanges: Designed for quick installation and removal without welding; ideal for maintenance-intensive applications. • Raised Face (RF) Flanges: Improves gasket compression and ensures leak-proof performance in pressurized systems. • Flat Face (FF) Flanges: Preferred in low-pressure setups with soft or non-metallic gaskets. • Forged Threaded Flanges: Offers enhanced strength and durability due to the forging process. • Custom-Machined Flanges: Precision-manufactured to meet specific dimensional, pressure, or material requirements. Available Monel Grades and Chemical Composition: 1. Monel 400 (UNS N04400) o Nickel (Ni): ≥ 63.0% o Copper (Cu): 28.0 – 34.0% o Iron (Fe): 2.0 – 2.5% o Manganese (Mn): ≤ 2.0% Applications: Excellent resistance to seawater, hydrofluoric acid, and alkalis. Commonly used in heat exchangers, marine hardware, and chemical processing equipment. 2. Monel K500 (UNS N05500) o Nickel (Ni): ≥ 63.0% o Copper (Cu): 27.0 – 33.0% o Aluminum (Al): 2.3 – 3.15% o Titanium (Ti): 0.35 – 0.85% Applications: Combines Monel 400’s corrosion resistance with increased strength and hardness. Used in pump shafts, valve components, and oil & gas drilling equipment. Applications of DIN 2565 Monel Flanges: • Marine Industry: Resistant to saltwater and ideal for piping systems on ships, submarines, and offshore platforms. • Chemical Processing: Handles aggressive acids, alkalis, and high-temperature chemical reactions. • Oil & Gas: Used in sour gas applications, valve assemblies, and pipeline systems. • Heat Exchangers and Condensers: Excellent thermal conductivity and corrosion resistance. • Aerospace and Defense: Suitable for fuel and hydraulic lines exposed to corrosive conditions. Key Features: • Manufactured as per DIN 2565 standards with PN 6 pressure rating • Exceptional resistance to corrosion, especially in saltwater and acidic environments • High mechanical strength and thermal conductivity • Non-magnetic and maintains integrity in a wide range of temperatures • Supplied with complete documentation, test certificates, and full traceability Conclusion: DIN 2565 Monel flanges from Ladhani Metal Corporation are engineered to perform in some of the most challenging industrial environments. With outstanding corrosion resistance, durability, and strength, these flanges are a reliable solution for marine, chemical, and oil & gas systems. Precision-crafted and quality-tested, our Monel flanges meet international standards and ensure long-term operational efficiency.

Product name:Titanium grade 12 plate Unit price:$15.5-$36.9/kg Material: Titanium Grade 12 (Ti-0.3Mo-0.8Ni) Standard: ASTM/ASME B265 Demension: Thickness*1000*2000mm Thickness*3000*6000mm (Standard size); Thickness: 0.5mm; 0.8mm; 1.0mm; 1.2mm; 1.5mm; 2.0mm; 3.0mm; 4.0mm ......40mm etc br>Technique : Rolled Product Introduction Titanium grade 12 plate Grades:Titanium alloy Grades 12 (Ti-0.3Mo-0.8Ni) Standard: ASTM B265 / ASME SB265 Thickness: 0.02"-3.9"(0.5-100mm) Width: 19.5"-118" (500-3000mm) Length: 19.5"-236"(500*6000mm) Or as customers' requests ASTM No. Fe max O max N max C max H max Mo Ni Bal Grade 12 0.30 0.25 0.015 0.08 0.015 0.2-0.4 0.6-0.9 Ti ASTM Grade Alloy Composition Tensile Strength Yield Strength Elongation min % ksi Mpa ksi Mpa Grade 12 Unalloyed Ti ("Pure") 50A -CP2 70 485 50 345 18

Product name: Alloy Titanium Ring Grade: Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Gr7 Gr9 Gr12 etc. Standard: ASME SB381 / ASTM B381,AMS 4928 Technique:Forged Size: OD200-1500mm * ID100-1200mm *Height20*600mm Application:Chemical indutry Product name: Alloy Titanium Ring Grade: Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Gr7 Gr9 Gr12 etc. Standard: ASME SB381 / ASTM B381,AMS 4928 Technique:Forged Size: OD200-1500mm * ID100-1200mm *Height20*600mm Application:Chemical indutry

Product Name: Gr4 titanium bar Standard: ASTM B348 Material: Grade 4 Unit Price: $15usd/kg- $45usd/kg Shape: Round Diameter: 6-350mm Length: Max 6000mm Surface: Bright Product Introduction Gr4 titanium bar Standard: ASTM B348 Material: Grade 4 titanium Unit Price: $15usd/kg- $45usd/kg Shape: Round Diameter: 6-350mm Length: Max 6000mm Surface: Bright Condition: Annealed Grade 4 titanium bar Chemical compositions(weight%,<=) Ti Al V Fe C Remainder ------- ------- 0.50 0.08 N H O Other(each) Other(total) 0.05 0.015 0.40 0.10 0.40 Physical properties(>=) Σb Tensile Strength (Mpa) σr0.2 Yield Strength (Mpa) δL0+50mm Elongation (%) ψ Reduction of area (%) 580 485 15 25 Titanium Round Bar Dimensions Φ 2 Φ 3 Φ 3.5 Φ 4 Φ 5 Φ 6 Φ 7 Φ 8 Φ 9 Φ 10 Φ 12 Φ 13 Φ 14 Φ 15 Φ 16 Φ 18 Φ 20 Φ 22 Φ 25 Φ 26 Φ 30 Φ 32 Φ 35 Φ 40 Φ 45 Φ 50 Φ 55 Φ 60 Φ 65 Φ 70 Φ 75 Φ 80 Φ 85 Φ 90 Φ 95 Φ 100 Φ 105 Φ 110 Φ 120 Φ 130 Φ 140 Φ 150 Φ 160 Φ 170 Φ 180 Φ 190 Φ 200 Φ 210 Φ 220 Φ 230 Φ 240 Φ 250 Φ 260 Φ 270 Φ 280 Φ 290 Φ 300 More Dimensions Please Contact us

Product Name: Titanium Anode Basket Material: Gr1, Gr2 Size: Customized Application: Anodizing Electroplating Plating Shape: Rectangular, round and spiral etc. Product Information Titanium basket is made of high quality Gr2 industrial pure titanium. The purity of titanium is 99.7%, and it has strong corrosion resistance. It is suitable for loading anode materials in various electroplating tanks. It adopts precision welding technology, and the welding joints are tightly combined and firm. Material: Gr1, Gr2 Size: Customized Application: Electroplating, anodizing, plating etc. Surface: Sand Blasting, Acid Washing, Brush Coating etc. Shape: Rectangular, round and spiral etc. MOQ: 10pcs Precautions The month of titanium basket should be slightly higher than the liquid level to prevent anode slag from flowing out. The lower end of the titanium basket should be 100~150mm higher than the part to avoid excessive current concentration of the lower part, causing scorching.