Ladhani Metal Corporation offers SS 310 Boiler Half Round Tube Shields designed to provide high-temperature and oxidation resistance for straight boiler tubes in extreme heat environments. Manufactured from austenitic stainless steel grade SS 310, these shields deliver excellent strength, thermal stability, and resistance to scaling at elevated temperatures, making them suitable for furnaces, power boilers, and heat recovery units where temperatures may exceed 1000°C. SS 310 is particularly effective in environments containing oxidizing gases and thermal cycling. Each shield is precision-formed into a half-round profile to closely fit the outer surface of boiler tubes, ensuring effective mechanical protection against soot blower erosion, high-velocity gas flow, and abrasive ash particles. Ladhani Metal Corporation manufactures, supplies, and exports SS 310 Boiler Half Round Tube Shields in a variety of lengths, diameters, and thicknesses to meet the exact requirements of industrial, thermal, and power sector applications in both domestic and international markets. SS 310 Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.25% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Ideal for use in high-temperature boilers, heat exchangers, and industrial heating systems exposed to oxidizing and carburizing atmospheres. Uses • Protection of straight boiler tubes in extreme temperature conditions • Installed in radiant sections and furnace walls of high-heat boilers • Guards against scaling and oxidation in flue gas zones • Suitable for waste heat recovery systems and incinerators • Used in chemical, steel, and cement plants where high thermal resistance is required Features • High-temperature resistance – Performs in continuous service above 1000°C • Excellent oxidation resistance – Suitable for oxidizing and mildly reducing atmospheres • Strong mechanical performance – Retains strength under elevated heat and stress • Precise fit – Half-round geometry for full tube coverage and secure installation • Multiple installation options – Can be clamped, banded, or tack welded • Export quality – Manufactured to meet global standards for heat-resistant applications Applications • Power generation – Shields boiler tubes from oxidation in superheaters and economizers • Chemical processing – Suitable for corrosive and high-temperature gas exposure • Steel and metallurgical plants – Used in reheat furnaces and combustion zones • Cement and incineration units – Withstands abrasive and oxidizing conditions Conclusion The SS 310 Boiler Half Round Tube Shield from Ladhani Metal Corporation provides long-lasting, high-temperature protection for straight boiler tubes operating in the most demanding thermal environments. With superior resistance to heat, scaling, and oxidation, these shields are a reliable solution for industrial boilers and heat systems worldwide. For custom sizing, export inquiries, or technical specifications, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

DIN 2634 monel flanges PN 25 are high-performance weld neck flanges manufactured in accordance with the DIN 2634 standard. Specifically engineered for high-pressure applications up to 25 bar (362 psi), these flanges are made from premium Monel alloys, offering excellent corrosion resistance, high strength, and durability in harsh environments. Their robust construction makes them ideal for applications involving aggressive chemical media and seawater where conventional metal flanges may degrade. Ladhani Metal Corporation is a trusted global manufacturer and supplier of Monel flanges, known for advanced manufacturing capabilities, precision machining, and strict adherence to international quality standards. Each flange undergoes thorough inspection and testing to ensure long-term reliability, safety, and resistance to extreme operating conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Designed for high-pressure systems requiring corrosion-resistant and mechanically robust flange connections. Flange Type: • Weld Neck Flanges Featuring an extended tapered hub, weld neck flanges provide excellent stress distribution at the base, ensuring strong and leak-proof joints in systems exposed to high pressure and thermal cycling. • Flat Face (FF) Flanges Ideal for use with softer gasket materials or in systems connecting to cast components, flat face flanges offer consistent and uniform gasket compression. Monel Grades and Typical Composition: Monel 400 (UNS N04400) – Nickel-Copper Alloy • Nickel (Ni): 63% minimum • Copper (Cu): 28-34% • Iron (Fe): 2.5% maximum • Manganese (Mn): 2.0% maximum • Carbon (C): 0.30% maximum Applications: Preferred in seawater and saltwater service, chemical processing, and marine equipment where excellent corrosion resistance in oxidizing and reducing environments is required. Monel K500 (UNS N05500) – Nickel-Copper Alloy with Additional Strengthening Elements • Nickel (Ni): 63% minimum • Copper (Cu): 28-34% • Iron (Fe): 2.5% maximum • Manganese (Mn): 2.0% maximum • Aluminum (Al) and Titanium (Ti): Added for age hardening Applications: Used in high-strength marine and chemical environments requiring enhanced mechanical properties and corrosion resistance. Applications of DIN 2634 Monel Flanges PN 25: • Offshore and Marine Systems Resists corrosion from seawater, brine, and marine atmospheres while maintaining strength under pressure. • Chemical and Petrochemical Processing Ideal for transporting corrosive media such as acids, alkalis, and chloride solutions at elevated pressures. • Desalination Plants Performs reliably in saltwater treatment and high-pressure water processing systems. • Power Generation Used in systems requiring resistance to erosion and corrosion in high-temperature steam and cooling circuits. • Pharmaceutical and Food Processing Applied in hygienic environments requiring corrosion resistance and chemical inertness. Key Features: • Manufactured in accordance with DIN 2634 dimensional and pressure requirements • PN 25 pressure rating supports high-pressure applications • Excellent resistance to corrosion, erosion, and stress corrosion cracking • Weld neck configuration ensures strong, vibration-resistant joints • Available in Monel 400 and Monel K500 alloys • Custom sizes, pressure classes, and surface finishes available upon request Conclusion: DIN 2634 monel flanges PN 25 from Ladhani Metal Corporation are engineered for demanding conditions where corrosion resistance, mechanical strength, and pressure integrity are essential. These Monel flanges provide long-term durability and reliable performance for advanced applications in marine, chemical, power generation, and industrial systems. For technical consultations, specialized requirements, or pricing information, contact Ladhani Metal Corporation today.

DIN 2634 titanium flanges PN 25 are high-performance weld neck flanges manufactured in accordance with the DIN 2634 standard. Specifically engineered for high-pressure applications up to 25 bar (362 psi), these flanges are made from premium titanium grades, offering exceptional corrosion resistance, low density, and outstanding mechanical strength even in the most demanding environments. Their lightweight yet highly durable nature makes them ideal for aggressive service conditions where conventional metal flanges may fail. Ladhani Metal Corporation is a trusted global manufacturer and supplier of titanium flanges, known for advanced manufacturing capabilities, precision machining, and strict adherence to international quality standards. Each flange undergoes thorough inspection and testing to ensure long-term reliability, safety, and resistance to extreme operating conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Designed for high-pressure systems requiring corrosion-resistant and mechanically robust flange connections. Flange Type: • Weld Neck Flanges Featuring an extended tapered hub, weld neck flanges provide excellent stress distribution at the base, ensuring strong and leak-proof joints in systems exposed to high pressure and thermal cycling. • Flat Face (FF) Flanges Ideal for use with softer gasket materials or in systems connecting to cast components, flat face flanges offer consistent and uniform gasket compression. Titanium Grades and Typical Composition: Titanium Grade 2 (UNS R50400) – Commercially Pure Titanium • Titanium (Ti): ≥ 98.9% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Hydrogen (H): ≤ 0.015% Applications: Preferred in seawater service, chemical processing, and marine equipment where high corrosion resistance in oxidizing environments is required. Titanium Grade 5 (Ti-6Al-4V / UNS R56400) – Alloyed Titanium • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.40% • Oxygen (O): ≤ 0.20% Applications: Used in high-strength and high-temperature applications, including aerospace systems, pressure vessels, and heat exchangers due to its superior strength-to-weight ratio and fatigue resistance. Applications of DIN 2634 Titanium Flanges PN 25: • Offshore and Marine Systems Resists corrosion from seawater and brine solutions while maintaining strength under pressure. • Chemical and Petrochemical Processing Ideal for transporting corrosive media such as chlorine, acids, and alkalis at elevated pressures. • Desalination Plants Performs exceptionally in salt-laden and high-pressure water processing systems. • Aerospace and Defense Equipment Used in high-performance fluid systems requiring lightweight and high-strength components. • Pharmaceutical and Medical Systems Applied in ultra-clean and sterile environments where corrosion-free operation is essential. Key Features: • Manufactured in accordance with DIN 2634 dimensional and pressure requirements • PN 25 pressure rating supports high-pressure applications • Lightweight construction reduces system weight without compromising strength • Exceptional resistance to corrosion, erosion, and high-temperature oxidation • Weld neck configuration ensures strong, vibration-resistant joints • Available in commercially pure and alloyed titanium grades • Custom sizes, pressure classes, and surface finishes available upon request Conclusion: DIN 2634 titanium flanges PN 25 from Ladhani Metal Corporation are engineered to perform in extreme conditions where high pressure, aggressive media, and corrosion resistance are critical. With superior mechanical strength and long-term durability, these titanium flanges are ideal for advanced applications in marine, chemical, aerospace, and industrial systems. For technical consultations, specialized requirements, or pricing information, contact Ladhani Metal Corporation today.

DIN 2633 duplex steel flanges PN 16 are precision-manufactured weld neck flanges designed according to the DIN 2633 standard, ideal for medium-pressure piping systems operating up to 16 bar (232 psi). These flanges are crafted from duplex stainless steels that combine the benefits of austenitic and ferritic microstructures, offering excellent mechanical strength, superior resistance to stress corrosion cracking, and enhanced durability in aggressive chemical and chloride-containing environments. They are ideal for applications where both corrosion resistance and high strength are essential. Ladhani Metal Corporation is a leading global manufacturer and supplier of duplex steel flanges, recognized for high-quality production, dimensional accuracy, and strict compliance with international standards. All flanges undergo rigorous inspection and testing to ensure reliable performance in challenging industrial conditions. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for medium-pressure pipelines requiring corrosion resistance and increased mechanical integrity. Flange Type: • Weld Neck Flanges These flanges feature a long tapered hub for improved flow characteristics and reduced mechanical stress at the weld area, ensuring stable and secure connections. • Flat Face (FF) Flanges Designed to provide a consistent sealing surface, especially effective when used with soft gaskets or when connecting to cast components. Duplex Steel Grades and Full Composition: Duplex 2205 (UNS S31803/S32205) • Chromium (Cr): 21.0 – 23.0% • Nickel (Ni): 4.5 – 6.5% • Molybdenum (Mo): 2.5 – 3.5% • Nitrogen (N): 0.08 – 0.20% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Carbon (C): ≤ 0.03% • Phosphorus (P): ≤ 0.03% • Sulfur (S): ≤ 0.02% • Iron (Fe): Balance Applications: Widely used in desalination plants, chemical process vessels, marine environments, and pulp and paper industries due to high strength and resistance to localized corrosion. Super Duplex 2507 (UNS S32750) • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 5.0% • Nitrogen (N): 0.24 – 0.32% • Manganese (Mn): ≤ 1.2% • Silicon (Si): ≤ 0.8% • Carbon (C): ≤ 0.03% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.02% • Iron (Fe): Balance Applications: Preferred in highly corrosive offshore, oil and gas, chemical, and high-chloride environments where superior strength and corrosion resistance are essential. Applications of DIN 2633 Duplex Steel Flanges PN 16: • Chemical and Petrochemical Plants Provides strong and corrosion-resistant connections for chemical reactors, storage tanks, and acid-handling systems. • Marine and Offshore Engineering Suitable for submerged systems, seawater cooling, and ballast water piping due to excellent resistance to chloride-induced corrosion. • Pulp and Paper Industry Performs reliably in bleaching and chemical recovery processes where both chemical resistance and strength are required. • Desalination and Water Treatment Ideal for high-salinity water systems and reverse osmosis pipelines requiring durable, corrosion-resistant components. • Oil and Gas Refineries Used in pipelines, pressure vessels, and heat exchangers subjected to sour gas and high-pressure operating environments. Key Features: • Manufactured to DIN 2633 standard • PN 16 pressure class for medium-pressure service • Weld neck configuration supports vibration resistance and proper alignment • Available in Duplex 2205 and Super Duplex 2507 grades • High resistance to stress corrosion cracking, pitting, and crevice corrosion • Excellent mechanical strength and fatigue resistance • Custom sizes, finishes, and specifications available upon request Conclusion: DIN 2633 duplex steel flanges PN 16 from Ladhani Metal Corporation offer an optimal combination of strength, corrosion resistance, and reliability for use in harsh industrial conditions. With high-performance duplex and super duplex materials, these flanges are the preferred choice for applications in chemical processing, offshore platforms, and desalination plants. For detailed technical support, customized configurations, or pricing, contact Ladhani Metal Corporation today.

DIN 2632 Inconel flanges PN 10 are precision-engineered weld neck flanges manufactured in accordance with the DIN 2632 standard. Designed for medium-pressure applications up to 10 bar (145 psi), these flanges offer exceptional resistance to high temperatures, oxidation, and aggressive chemical environments. Produced using high-performance Inconel alloys, they ensure reliable operation in highly corrosive and thermally demanding industrial systems. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of Inconel flanges, known for engineering excellence and stringent quality control. Each flange undergoes rigorous testing to meet relevant industrial specifications and environmental safety standards. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for medium-pressure pipeline systems requiring superior corrosion and temperature resistance. Flange Type: • Weld Neck Flanges Engineered with a long tapered hub to ensure accurate pipe alignment and minimize stress concentration at the flange base. This design allows smoother fluid flow and reinforces joint strength. • Flat Face (FF) Flanges Flat face configuration ensures even gasket compression, especially suited for systems using soft gaskets or mating with cast components. Inconel Grades and Composition: Inconel 600 • Nickel (Ni): 72.0% minimum • Chromium (Cr): 14.0–17.0% • Iron (Fe): 6.0–10.0% • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.0% • Silicon (Si): ≤ 0.5% Applications: Inconel 600 offers excellent resistance to high-temperature oxidation and corrosion. Commonly used in chemical processing, food industry heat exchangers, and marine exhaust systems. Inconel 625 • Nickel (Ni): Balance • Chromium (Cr): 20.0–23.0% • Molybdenum (Mo): 8.0–10.0% • Niobium (Nb): 3.15–4.15% • Iron (Fe): ≤ 5.0% • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 0.50% • Silicon (Si): ≤ 0.50% Applications: Inconel 625 is known for its outstanding fatigue strength and resistance to pitting, crevice corrosion, and stress corrosion cracking. It is widely used in marine, chemical, aerospace, and nuclear sectors. Inconel 718 • Nickel (Ni): 50–55% • Chromium (Cr): 17–21% • Iron (Fe): Balance • Niobium (Nb): 4.75–5.5% • Molybdenum (Mo): 2.8–3.3% • Titanium (Ti): 0.65–1.15% • Aluminum (Al): 0.2–0.8% • Cobalt (Co): ≤ 1.0% • Carbon (C): ≤ 0.08% Applications: Inconel 718 offers exceptional tensile, fatigue, and creep resistance at temperatures up to 700°C. It is extensively used in aerospace engines, gas turbines, nuclear reactors, and high-performance industrial equipment where superior mechanical strength and corrosion resistance are required. Applications of DIN 2632 Inconel Flanges PN 10: • Chemical and Petrochemical Industry Ideal for systems carrying corrosive chemicals, acids, and oxidizing agents at elevated temperatures. • Marine and Offshore Used in saltwater piping, offshore platforms, and naval systems requiring materials with high corrosion and heat resistance. • Power Generation Suitable for high-temperature applications in power plants, heat exchangers, and turbine systems. • Aerospace and Defense Applied in jet engine components, space propulsion systems, and structural parts subjected to extreme pressure and heat. Key Features: • Manufactured to DIN 2632 specifications • PN 10 pressure rating for medium-pressure systems • Weld neck design for superior mechanical integrity • Available in Inconel 600, 625, and 718 for application-specific performance • Flat face option for improved gasket compression • Excellent resistance to oxidation, corrosion, and high-temperature stress • Suitable for critical applications in chemical, marine, aerospace, and energy sectors • Custom sizes, finishes, and alloys available upon request Conclusion: DIN 2632 Inconel Flanges PN 10 from Ladhani Metal Corporation deliver unmatched reliability and durability in medium-pressure environments where heat and corrosion are persistent challenges. With a selection of Inconel grades including 600, 625, and 718, these flanges are ideal for use in chemical processing, marine engineering, power generation, and aerospace industries. For customized solutions, technical guidance, or pricing, contact Ladhani Metal Corporation today.

DIN 2630 carbon steel flanges PN 2.5 are precision-engineered weld neck flanges designed in accordance with the DIN 2630 standard, suitable for low-pressure applications up to 2.5 bar (36.25 psi). Manufactured from high-quality carbon steel grades such as ASTM A105 and A350 LF2, these flanges offer reliable mechanical strength and excellent weldability. Carbon steel flanges are ideal for general-purpose piping systems where toughness, cost-effectiveness, and structural integrity are required in low-pressure environments. Ladhani Metal Corporation is a trusted global manufacturer and supplier of carbon steel flanges, known for delivering quality components built to meet international standards. Our DIN 2630 PN 2.5 carbon steel weld neck flanges are widely used in industries such as oil and gas, water treatment, power generation, and general manufacturing. Every flange is manufactured under stringent quality control to ensure performance, durability, and compliance with customer requirements. Pressure Rating: • PN 2.5 (2.5 bar / 36.25 psi): Designed for low-pressure systems requiring durable, cost-effective materials with high mechanical strength. Flange Type: • Weld Neck Flanges Equipped with a long tapered hub to ensure smooth fluid flow and reduce stress concentration, these flanges are suited for critical applications involving pressure and temperature changes. • Flat Face (FF) Flanges Flat face flanges provide uniform gasket compression, especially when used with cast components or soft gasket materials in low-pressure setups. Carbon Steel Grades and Chemical Composition: ASTM A105 (Forged Carbon Steel) • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Commonly used in ambient- and high-temperature service in pressure systems. Ideal for general-purpose industrial piping, valve connections, and flanged joints. ASTM A350 LF2 (Low-Temperature Carbon Steel) • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.15 – 0.30% Applications: Designed for low-temperature services where enhanced notch toughness is essential, such as cryogenic and refrigerated systems. Applications of DIN 2630 Carbon Steel Flanges PN 2.5: • Oil and Gas Industry Used in upstream and downstream piping for fluid transport under low-pressure conditions. • Water Treatment Plants Ideal for piping systems handling potable water, wastewater, and industrial effluents. • Power Generation Applied in cooling systems, boilers, and auxiliary piping in thermal and hydroelectric power plants. • General Industrial Use Suitable for manufacturing facilities, mechanical piping, and structural connections. Key Features: • Manufactured as per DIN 2630 standards • PN 2.5 pressure class for low-pressure piping systems • Weld neck design improves mechanical stability and flow characteristics • Flat face option enables consistent sealing with softer gasket materials • High strength, excellent machinability, and cost-efficiency • Available in standard and customized sizes, face types, and surface finishes Conclusion: DIN 2630 Carbon Steel Flanges PN 2.5 from Ladhani Metal Corporation provide a practical and durable solution for low-pressure piping systems across various industries. With strong mechanical properties, reliable performance, and economical pricing, these flanges are ideal for applications requiring consistent quality and weldability. For technical support, custom solutions, or pricing, contact Ladhani Metal Corporation.

DIN 2630 Monel flanges PN 2.5 are precision-engineered weld neck flanges manufactured according to the DIN 2630 standard. These flanges are designed for low-pressure applications up to 2.5 bar (36.25 psi), offering outstanding resistance to corrosion, especially in marine and chemical environments. Fabricated from premium Monel alloys such as Monel 400 and Monel K500, these flanges provide excellent mechanical strength and durability, making them ideal for challenging service conditions in low-pressure piping systems. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of Monel flanges, known for delivering high-quality products with advanced engineering precision. Our DIN 2630 PN 2.5 Monel weld neck flanges are extensively used in industries such as marine, chemical processing, oil and gas, and power generation, where superior corrosion resistance and reliability are essential. Each flange is produced to meet stringent industry standards for safety, performance, and longevity. Pressure Rating: • PN 2.5 (2.5 bar / 36.25 psi): Suitable for low-pressure applications requiring corrosion-resistant materials with excellent mechanical integrity. Flange Type: • Weld Neck Flanges Designed with a long tapered hub to enhance stress distribution and minimize turbulence, providing structural reliability and smooth fluid flow in demanding systems. • Flat Face (FF) Flanges Flat face flanges are ideal for use with cast components or soft gasket materials, ensuring uniform gasket compression in low-pressure environments. Monel Grades and Full Composition: Monel 400 (UNS N04400) • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): 2.0 – 3.0% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% Applications: Exceptional resistance to seawater, acids, and alkalis. Widely used in marine applications, chemical and hydrocarbon processing, and heat exchangers. Monel K500 (UNS N05500) • Nickel (Ni): ≥ 63.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2.0% • Manganese (Mn): ≤ 1.5% • Carbon (C): ≤ 0.25% Applications: Precipitation-hardened alloy offering greater strength and hardness than Monel 400 while retaining excellent corrosion resistance. Used in pump shafts, valves, and marine equipment. Applications of DIN 2630 Monel Flanges PN 2.5: • Marine Industry Ideal for use in seawater piping, heat exchangers, and ballast systems where corrosion resistance is critical. • Chemical Processing Utilized in process piping carrying corrosive chemicals and acidic media under low pressure. • Oil and Gas Industry Suitable for sour gas environments, offshore drilling platforms, and processing equipment exposed to corrosive fluids. • Power Generation Used in cooling and condensate systems where resistance to brine and steam is required. Key Features: • Manufactured in accordance with DIN 2630 standards • PN 2.5 pressure class designed for low-pressure applications • Weld neck design ensures better stress handling and flow performance • Flat face option available for uniform gasket sealing • Made from corrosion-resistant Monel 400 and Monel K500 alloys • High mechanical strength and excellent resistance to marine and chemical corrosion • Custom sizes, specifications, and finishes available upon request Conclusion: DIN 2630 Monel Flanges PN 2.5 from Ladhani Metal Corporation provide an ideal solution for low-pressure systems operating in aggressive and corrosive environments. With superior mechanical strength and outstanding resistance to seawater, acids, and other chemicals, these flanges are a reliable choice for critical applications across various industries. For custom configurations, technical consultation, or pricing details, contact Ladhani Metal Corporation.

DIN 2630 Inconel flanges PN 2.5 are precision-engineered weld neck flanges manufactured according to the DIN 2630 standard. These flanges are designed for low-pressure applications up to 2.5 bar (36.25 psi), providing excellent resistance to high temperature, corrosion, and oxidation in demanding industrial environments. Made from high-performance Inconel alloys such as Inconel 600, Inconel 625, and Inconel 718, these flanges are ideal for use where strength, durability, and resistance to harsh chemicals are required in low-pressure piping systems. Ladhani Metal Corporation is a trusted global supplier and manufacturer of Inconel flanges, known for quality craftsmanship and engineering expertise. Our DIN 2630 PN 2.5 Inconel weld neck flanges are commonly utilized in chemical processing, aerospace, power generation, and marine industries where superior corrosion and heat resistance are essential. We ensure that each flange meets rigorous standards for performance, safety, and reliability. Pressure Rating: • PN 2.5 (2.5 bar / 36.25 psi): Suitable for low-pressure applications requiring specialized material properties for corrosion and heat resistance. Flange Type: • Weld Neck Flanges Designed with a long tapered hub to provide enhanced stress distribution and minimize turbulence, ensuring structural integrity and smooth flow in critical piping systems. • Flat Face (FF) Flanges Flat face flanges offer uniform gasket compression and are suitable for mating with cast components or soft gasket materials in low-pressure systems. Inconel Grades and Full Composition: Inconel 600 (UNS N06600) • Nickel (Ni): 72.0 – 80.0% • Chromium (Cr): 14.0 – 17.0% • Iron (Fe): Balance • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.0% • Silicon (Si): ≤ 0.5% Applications: Excellent resistance to high-temperature oxidation and corrosion in moderately aggressive environments. Used in furnace components, heat exchangers, and chemical process equipment. Inconel 625 (UNS N06625) • Nickel (Ni): 58.0 – 63.0% • Chromium (Cr): 20.0 – 23.0% • Molybdenum (Mo): 8.0 – 10.0% • Iron (Fe): Balance • Carbon (C): ≤ 0.10% • Niobium (Nb): 3.15 – 4.15% Applications: High strength and exceptional resistance to pitting, crevice corrosion, and stress corrosion cracking. Ideal for marine, chemical, and aerospace applications. Inconel 718 (UNS N07718) • Nickel (Ni): 50.0 – 55.0% • Chromium (Cr): 17.0 – 21.0% • Iron (Fe): Balance • Niobium (Nb): 4.75 – 5.50% • Molybdenum (Mo): 2.80 – 3.30% • Titanium (Ti): 0.65 – 1.15% • Aluminum (Al): 0.20 – 0.80% • Carbon (C): ≤ 0.08% Applications: Precipitation-hardened alloy offering excellent strength, corrosion resistance, and weldability. Widely used in aerospace, nuclear reactors, and high-performance chemical processing equipment. Applications of DIN 2630 Inconel Flanges PN 2.5: • Chemical and Petrochemical Industry Used in piping systems carrying corrosive and high-temperature fluids under low pressure. • Aerospace and Defense Applied in low-pressure fuel and hydraulic lines where heat and corrosion resistance are critical. • Power Generation Ideal for heat exchangers, boilers, and turbine components operating at moderate temperatures and low pressure. • Marine Industry Used in seawater cooling and exhaust systems requiring corrosion-resistant materials. Key Features: • Manufactured as per DIN 2630 standards • PN 2.5 pressure class suitable for low-pressure service • Weld neck design for optimal stress management and flow efficiency • Available in high-performance Inconel alloys 600, 625, and 718 • Flat face option for uniform gasket sealing • Superior corrosion and heat resistance properties • Custom sizes, finishes, and grades available on request Conclusion: DIN 2630 Inconel Flanges PN 2.5 from Ladhani Metal Corporation provide a reliable solution for low-pressure piping systems requiring exceptional corrosion resistance, high strength, and durability. These flanges are engineered to meet the demanding requirements of chemical, aerospace, marine, and power generation industries. For custom specifications, technical support, or pricing information, contact Ladhani Metal Corporation.

DIN 2576 Carbon Steel Flanges PN 10 are slip-on type flanges manufactured in accordance with the DIN 2576 standard, suitable for piping systems operating under low to moderate pressures. Made from high-quality carbon steel, these flanges offer good mechanical strength and are cost-effective solutions for a wide range of industrial applications where corrosion resistance is not the primary concern. The slip-on design allows easy fitting over the pipe and facilitates welding on both the inner and outer edges, ensuring reliable and leak-proof connections. Ladhani Metal Corporation is a reputed manufacturer and global supplier of carbon steel flanges, delivering components that comply with international quality and dimensional standards. DIN 2576 carbon steel flanges are widely used in general-purpose piping systems across industries such as oil and gas, power generation, HVAC, water treatment, and process industries. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for use in low to medium pressure systems with stable operational demands. Flange Types: • Slip-On Flanges These flanges slide over the pipe end and are welded on both sides, allowing for simple installation and strong mechanical joints. • Flat Face (FF) Flanges Designed to mate with flat gaskets and flat surfaces, suitable for systems involving cast iron or non-metallic components. Carbon Steel Grades and Composition: Common Grades: • ASTM A105 (Forged Carbon Steel) • ASTM A516 Grade 70 (Pressure Vessel Quality Steel) • IS 2062 (Structural Carbon Steel) Typical Composition (ASTM A105): • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% Applications: DIN 2576 carbon steel flanges are preferred in systems where high strength is required and the risk of corrosion is minimal or controlled through external protection (e.g., coatings or linings). Common applications include: • Oil and Gas Transmission Used in pipelines and flowlines where moderate pressures are involved. • Power Plants Suitable for steam, water, and air systems in thermal and hydroelectric power stations. • Water Treatment and Distribution Employed in clean water and wastewater systems, including pumping stations and storage tanks. • HVAC Systems Utilized in heating, ventilation, and air conditioning ducting and piping. • Chemical and Petrochemical Applied in non-corrosive fluid handling and auxiliary systems. • Structural and Fabrication Works Used in non-pressure retaining structural supports and frames. Key Features: • Manufactured to DIN 2576 standards • PN 10 pressure rating for medium-duty applications • Cost-effective and mechanically strong • Available in a variety of carbon steel grades • Slip-on design offers ease of installation and alignment • Flat face design compatible with flat gaskets and soft materials • Ideal for industrial sectors with controlled or minimal corrosion environments • Custom drilling, dimensions, and surface treatments available Conclusion: DIN 2576 Carbon Steel Flanges PN 10 by Ladhani Metal Corporation offer a practical and economical solution for low to moderate pressure piping systems. With reliable performance, ease of installation, and availability in various carbon steel grades, these flanges are suited for a broad range of applications in power, water, oil and gas, and infrastructure industries. For detailed specifications, material compatibility, or project-based orders, contact Ladhani Metal Corporation today.