QUALITU STANDARD MATERIAL NO. OLD DESIGNATION DC03 DIN EN 10130 1.0347 St 13-03 The deep drawing grade DC03 is specified according to the standard DIN EN 10130, which focuses on cold-rolled flat products made of soft steels for cold forming. This standard defines the technical requirements and test methods for cold-rolled products used in various industrial applications, particularly where high demands are placed on surface quality and mechanical properties. DC03 is a low-carbon steel characterized by excellent cold formability. The chemical composition of DC03 is precisely defined to ensure that the material has the required mechanical properties. Typically, DC03 contains a maximum of 0.10% carbon, a maximum of 0.45% manganese and traces of phosphorus and sulphur. This small amount of alloying elements contributes to the good formability and weldability of the steel. The mechanical properties of DC03 are also clearly defined. The material has a yield strength of at least 140 MPa and a tensile strength of between 270 and 370 MPa. In addition, DC03 has an elongation at break of at least 34%, which underlines its excellent formability. These properties make DC03 particularly suitable for the production of complex components that require high precision and surface quality, such as body parts in the automotive industry or household appliances. The DIN EN 10130 standard also specifies the tolerances for dimensions, shape and surface finish. These tolerances are crucial to ensure consistently high product quality and to meet the requirements of end users. The surface of the cold-rolled flat products can be supplied in various qualities, from matt to glossy, to meet the specific requirements of different applications. The DIN EN 10152 standard specifies electrolytically galvanized, cold-rolled flat steel products for cold forming, including the deep-drawing grade DC03. This standard defines the requirements for the zinc coating and the basic mechanical properties of the base material. DC03, when electrolytically galvanized in accordance with DIN EN 10152, is given an additional corrosion protection layer of zinc. This layer protects the material from oxidative influences and significantly increases the service life of the components made from it. The zinc coating can be applied in various thicknesses, depending on the specific requirements of the application. Typical coating thicknesses range from 5 to 20 µm. The chemical composition and mechanical properties of the base material DC03 remain unchanged after galvanizing and meet the requirements of DIN EN 10130. DC03 therefore retains its excellent cold formability and mechanical performance. The yield strength, tensile strength and elongation at break also remain in the same range as for ungalvanized DC03. In addition to mechanical performance, the quality of the zinc coating is of central importance. The DIN EN 10152 standard specifies the requirements for the uniformity of the coating, the adhesive strength of the zinc and the surface quality. These requirements ensure that the galvanized products offer high corrosion resistance and an aesthetically pleasing surface. The use of DC03 in accordance with DIN EN 10152 is widespread in the automotive industry, in the construction industry and in the manufacture of household appliances, where improved corrosion resistance is required in addition to high formability. Electrolytic galvanizing offers optimum protection here without impairing the excellent mechanical properties of the base material. In summary, it can be said that the deep-drawing grade DC03 offers a wide range of applications in accordance with both DIN EN 10130 and DIN EN 10152. While DIN EN 10130 focuses on high formability and surface quality, DIN EN 10152 supplements these properties with improved corrosion resistance thanks to the zinc coating. Both standards ensure that DC03 is a reliable and high-quality material for numerous industrial applications. Cold-rolled flat steel DC03, produced in accordance with the DIN EN 10130 and DIN EN 10152 standards, offers a number of advantages for applications in the cold forming process. While DIN EN 10130 defines the basic requirements for chemical composition, mechanical properties and surface quality, DIN EN 10152 extends these specifications to include specific conditions for electrolytically galvanized products that offer additional corrosion protection. Both standards together ensure that DC03 is a versatile material with high quality and durability.

Half Round Tube Shield Ladhani Metal Corporation manufactures 1Cr25Ni20Si2 Half Round Straight Tube Shields to deliver exceptional protection to straight boiler and heat exchanger tubes in aggressive high-temperature environments. 1Cr25Ni20Si2 Half Round Straight Tube Shield The 1Cr25Ni20Si2 Half Round Straight Tube Shield is fabricated in a semi-cylindrical form to protect the outer surface of straight tubes from scaling, tube wall thinning, and structural damage caused by hot combustion gases or ash-laden flows. Its high silicon content improves oxidation resistance and inhibits the formation of brittle scales, while the alloy’s high-temperature stability ensures long service life under cyclic heating and cooling operations. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr25Ni20Si2 Half Round Straight Tube Shields, offering precise fit and durable tube protection across thermal and petrochemical industries. Material Grade 1Cr25Ni20Si2 – High-chromium, high-nickel heat-resistant alloy with enhanced silicon for improved oxidation and thermal shock resistance. Chemical Composition of 1Cr25Ni20Si2 • Carbon (C): ≤ 0.10% • Silicon (Si): 1.50 – 2.50% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Uses • Radiant section protection in waste heat boilers and reformers • Straight tube shielding in high-temperature furnaces • Heat recovery units in ammonia, hydrogen, and methanol plants • Erosion control in fluidized bed combustion systems Features • Excellent oxidation and scaling resistance at high temperatures • High thermal stability under long-term service • Superior resistance to carburization and sulfidation • Durable against erosion from high-velocity gas and ash • Maintains mechanical integrity under thermal shock • Custom-fabricated to match tube size, radius, and operational needs Applications • petrochemical and fertilizer plants – For reformer and convection section protection • power generation – In boilers, WHRBs, and waste incinerators • thermal process systems – For furnace and heat exchanger tube shielding • hydrogen and ammonia production – Suitable for synthesis gas environments • metallurgy – For steel reheating furnaces and heat treatment zones Conclusion 1Cr25Ni20Si2 Half Round Straight Tube Shields from Ladhani Metal Corporation are engineered for performance in the harshest high-temperature environments. Their robust composition and resistance to thermal and chemical degradation make them essential for extending the life of straight tubes exposed to extreme flue gas conditions. For orders, custom fabrication, and technical support, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Half Round Tube Shield Ladhani Metal Corporation manufactures SS 310 Half Round Straight Tube Shields to protect boiler and heat exchanger tubes from high-temperature corrosion, oxidation, and erosion. These shields are precisely engineered to conform to straight tube surfaces and serve as a protective barrier in harsh thermal environments. SS 310 is an austenitic stainless steel known for its high chromium and nickel content, offering excellent resistance to oxidation and scaling at elevated temperatures. SS 310 Half Round Straight Tube Shield The SS 310 Half Round Straight Tube Shield is specifically designed for applications involving intense heat and corrosive gas flow. With its superior resistance to oxidation and sulfidation, this shield is ideal for straight tube sections in boilers, superheaters, reformers, and high-temperature process equipment. The half-round shape allows for secure placement while maintaining ease of installation and servicing. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SS 310 Half Round Straight Tube Shields, delivering high-performance tube protection solutions for power generation, petrochemical, and thermal processing industries. Material Grade SS 310 – High-temperature austenitic stainless steel with enhanced resistance to oxidation and thermal fatigue. Chemical Composition of SS 310 • Carbon (C): ≤ 0.25% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Suitable for environments with elevated temperatures, thermal cycling, and aggressive flue gas exposure. Uses • Protecting straight tubes in superheaters and reheaters • Shielding economizer sections in boilers • Used in steam reformers and furnace tube systems • Applied in petrochemical heat recovery and cracking units • Installed in chemical and fertilizer plants handling hot process gases Features • High oxidation resistance – Performs reliably at temperatures up to 1100°C • Excellent scaling resistance – Chromium-nickel alloy composition minimizes metal loss • Structural integrity – Maintains strength under prolonged thermal cycling • Custom design – Fabricated to fit tube diameter, thickness, and required length • Easy to install – Secures in place with clamps, tack welds, or metal straps • Extended durability – Minimizes downtime and maintenance in harsh environments Applications • thermal power stations – Shields straight sections of superheater tubes from fly ash and flue gas erosion • oil and gas refineries – Used in fired heaters and steam reforming units exposed to hot corrosive media • waste heat recovery boilers – Enhances protection in high-velocity gas flow zones • process heating systems – Ideal for straight tubes in sulfur recovery, ammonia cracking, and hydrogen production • industrial boilers – Extends tube service life under continuous high-temperature operation Conclusion The SS 310 Half Round Straight Tube Shield from Ladhani Metal Corporation is a proven solution for tube protection in aggressive thermal environments. Its superior heat resistance, oxidation protection, and durable performance make it a trusted choice in power generation, chemical processing, and industrial boiler systems. Customizable to exact dimensions, these shields are designed for long-term service reliability. For detailed specifications, custom configurations, or orders, please contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. 1Cr20Ni14Si2 U Type Half Round Tube Shield The 1Cr20Ni14Si2 U Type Half Round Tube Shield is manufactured from a high-temperature austenitic stainless steel alloy designed for demanding thermal environments. Composed primarily of chromium and nickel with enhanced silicon content, this alloy provides outstanding resistance to oxidation, scaling, carburization, and thermal fatigue. It is particularly effective in shielding U-bend tube sections within boilers, reformers, and heat recovery systems where prolonged exposure to high heat and reactive gases can degrade performance. The U-type configuration ensures full coverage of the inner and outer arcs of curved tubes, delivering comprehensive protection against mechanical and thermal damage. • Outer U Type Half Round Tube Shield – Protects the outer curvature of U-bends from high-temperature flue gas erosion, slag deposits, and oxidizing environments. • Inner U Type Half Round Tube Shield – Shields the inner bend arc from thermal stress cracking, scale formation, and turbulence-induced wear. Ladhani Metal Corporation provides 1Cr20Ni14Si2 U Type Half Round Tube Shields for industries requiring reliable, long-term protection in aggressive high-temperature service conditions. Chemical Composition of 1Cr20Ni14Si2 – Heat-Resistant Austenitic Stainless Steel • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.50 – 2.50% • Chromium (Cr): 19.0 – 21.0% • Nickel (Ni): 13.0 – 15.0% • Iron (Fe): Balance Applications: Ideal for continuous and cyclic high-temperature systems where resistance to oxidation, thermal fatigue, and carburization is critical. Uses • Protection of U-bend tubes in superheaters and reheaters in power generation systems • Shielding of return bends in waste heat recovery boilers and HRSGs operating under high flue gas flow • Coverage for curved tube sections in reformers, cracking furnaces, and thermal oxidizers • Safeguarding tube bends in heat exchangers, condensers, and process gas heating systems • Applicable in chemical, metallurgical, and energy industries where extreme thermal cycling and gas exposure occur Features • Excellent oxidation resistance – Chromium and silicon-rich composition provides strong protection against scaling in high-temperature, oxidizing atmospheres. • Superior thermal fatigue performance – Maintains mechanical strength and dimensional stability under rapid temperature fluctuations. • Dual-arc shielding – Available in inner and outer U-type configurations for total protection of return bends in heat exchanger systems. • Precision engineered – Manufactured to match tube diameter and bend radius, ensuring tight, secure installation without vibration or misalignment. • Easy to install – Can be quickly mounted using banding, clamps, or tack welds without the need to disassemble tube bundles. • Long service life – Designed for demanding environments, reducing maintenance frequency and enhancing overall system efficiency. Applications • thermal power plants – Installed in U-bends of superheaters and reheaters to prevent heat-induced scaling, erosion, and fatigue cracking. Improves reliability and heat transfer efficiency. • petrochemical and refinery units – Used in process heaters, reformers, and thermal units where high-temperature gas exposure is constant. Provides stable, long-term protection. • waste heat recovery units – Shields U-shaped tubes in WHRBs and HRSGs from slag deposits, oxidizing gases, and temperature cycling stress. • chemical industries – Ideal for ammonia synthesis, methanol production, and gas reforming systems exposed to thermal shock and oxidizing media. • metal and glass manufacturing – Protects curved tubes in furnaces and preheaters exposed to abrasive and high-heat environments. Conclusion The 1Cr20Ni14Si2 U Type Half Round Tube Shield by Ladhani Metal Corporation is a high-performance solution for protecting U-bend tube sections in the most demanding thermal and chemical environments. With excellent resistance to oxidation, carburization, and thermal fatigue, this shield is ideal for use in power plants, refineries, chemical processing units, and high-temperature industrial systems. Designed for precision fit and easy installation, it provides dependable, long-lasting protection that reduces maintenance and extends equipment service life. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-fabricated components used to protect the external surfaces of tubes in boilers, heat exchangers, and high-temperature industrial equipment. These shields are critical for reducing erosion, oxidation, and thermal degradation, particularly in high-temperature zones where process gases, flames, or particulate matter can damage tube integrity over time. 1Cr20Ni14Si2 Half Round Tube Shield The 1Cr20Ni14Si2 Half Round Tube Shield is a semi-cylindrical protective sleeve manufactured from a high-performance austenitic stainless steel alloy consisting of approximately 20% chromium, 14% nickel, and 2% silicon. This alloy is designed for excellent oxidation resistance, carburization resistance, and high-temperature structural stability. The inclusion of silicon significantly enhances the formation of a protective oxide film, making it suitable for use in severe thermal environments such as industrial furnaces, superheaters, and reformers. The shield’s half-round profile is engineered for easy installation over the tube surface, ensuring a tight, durable fit and long-term protection. Chemical Composition of 1Cr20Ni14Si2 – Austenitic Heat-Resistant Stainless Steel • Carbon (C): ≤ 0.15% • Silicon (Si): 1.50 – 2.50% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 19.0 – 21.0% • Nickel (Ni): 13.0 – 15.0% • Iron (Fe): Balance Uses • Boiler Tube Protection – Shields critical areas of superheater and reheater tubes from oxidation and scale formation under high flue gas temperatures. • Furnace Tube Shielding – Guards against flame impingement, high-temperature corrosion, and mechanical erosion in radiant and convection zones. • Heat Exchanger Cladding – Offers external protection for tubes subjected to thermal shock and corrosive process gases. • Steam Reforming Equipment – Prevents surface degradation of tubes in syngas and hydrogen production systems operating under carburizing conditions. • Waste Heat Boilers and Incinerators – Provides a thermal barrier for tubes exposed to particulate-laden gas flows and fluctuating temperatures. Features • Excellent Oxidation Resistance – High chromium and silicon content form a dense, protective oxide layer for long service in oxidizing environments. • Carburization and Thermal Fatigue Resistance – Suitable for prolonged use in atmospheres containing hydrocarbons, CO, and high radiant heat. • High-Temperature Durability – Retains strength and resists creep deformation at service temperatures up to 1000°C. • Austenitic Microstructure – Offers superior ductility, resistance to cracking under thermal cycling, and excellent metallurgical stability. • Easy Installation – Half-round configuration allows for fast on-site fitment using mechanical clamping or welding, with minimal tube disruption. • Surface Finishing Options – Available in pickled, passivated, or bright annealed finishes for improved corrosion and heat resistance. • Custom Built – Manufactured to meet specific size, thickness, and design requirements for varied industrial applications. Applications • Thermal Power Plants – Used to protect boiler tubes in high-temperature zones like superheaters, economizers, and air preheaters. • Petrochemical and Refining Plants – Deployed in furnace tubes, reformer systems, and transfer line exchangers where oxidation and carburization are concerns. • Waste-to-Energy Systems – Protects boiler and heat recovery tubes from corrosive gas attack and ash erosion in incinerators. • Metallurgical Furnaces – Applied in annealing, forging, and reheating furnaces for protecting tube walls exposed to high heat and corrosive gases. • Cement and Lime Kilns – Shields heat recovery piping and cooler tubes from abrasion and elevated thermal conditions. • Chemical Process Equipment – Guards steam and process tubes in reactors, condensers, and exchangers from scaling and thermal damage. Conclusion The 1Cr20Ni14Si2 Half Round Tube Shield by Ladhani Metal Corporation is engineered to perform reliably in high-temperature, high-corrosion industrial environments. With excellent resistance to oxidation, carburization, and thermal fatigue, this alloy-based shield offers superior performance and longevity for boiler and furnace applications. Its austenitic structure ensures mechanical stability and ductility under extreme conditions, while its precise half-round design enables convenient installation and durable coverage. Custom-built to your project’s specifications, Ladhani Metal Corporation’s tube shields represent a smart investment in system protection, reliability, and long-term efficiency. For technical details, customization options, or a quotation, please contact Ladhani Metal Corporation.

DIN 2634 carbon steel flanges PN 25 are high-strength weld neck flanges manufactured according to the DIN 2634 standard. Specifically designed for use in high-pressure piping systems operating up to 25 bar (362 psi), these flanges offer excellent mechanical performance and are suitable for a wide range of industrial applications. Manufactured from quality carbon steel, they provide strong, durable, and cost-effective solutions for systems where corrosion resistance requirements are moderate but structural integrity is critical. Ladhani Metal Corporation is a recognized manufacturer and global supplier of carbon steel flanges, known for precision engineering, strict adherence to international standards, and advanced production capabilities. Each flange is subject to comprehensive testing and inspection to ensure reliability and consistent performance under demanding operating conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Suitable for medium to high-pressure applications where strength and impact resistance are essential. Flange Type: • Weld Neck Flanges Designed with a tapered hub to ensure smooth transition from flange to pipe, weld neck flanges are ideal for systems experiencing frequent thermal cycling, pressure fluctuations, and mechanical stress. • Flat Face (FF) Flanges Recommended for use with gaskets made from soft materials or when connecting to cast iron components, flat face flanges ensure even gasket compression and reliable sealing performance. Carbon Steel Grades and Typical Composition: Carbon Steel (ASTM A105 / C22.8 equivalent) – Forged Carbon Steel • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% • Iron (Fe): Balance Applications: Commonly used in oil and gas, petrochemical, water transmission, and power generation industries, especially in applications where high mechanical strength and pressure handling are more critical than corrosion resistance. Applications of DIN 2634 Carbon Steel Flanges PN 25: • Oil and Gas Pipelines Widely used in upstream and downstream systems for fluid transport under high pressure. • Petrochemical and Refining Plants Efficiently handles high-pressure flow systems involving hydrocarbons and steam. • Power Plants and Boiler Systems Suited for high-pressure steam and water lines, offering excellent tensile strength and fatigue resistance. • Water and Wastewater Infrastructure Used in municipal and industrial pipelines requiring cost-effective, robust flange connections. • General Industrial Systems Applicable in a wide range of mechanical systems and processing plants handling non-corrosive or mildly corrosive media. Key Features: • Compliant with DIN 2634 pressure and dimensional standards • PN 25 rating ensures compatibility with high-pressure pipelines • High tensile and yield strength for demanding structural requirements • Weld neck design enhances resistance to vibration and thermal expansion • Cost-effective solution for pressure-bearing connections • Available in standard and custom sizes, surface finishes, and pressure ratings • Heat treatment and coating options available upon request Conclusion: DIN 2634 carbon steel flanges PN 25 from Ladhani Metal Corporation provide a robust and economical solution for high-pressure systems where mechanical performance is essential. Their strength, reliability, and adaptability make them a preferred choice across industries such as oil and gas, power generation, and water infrastructure. For technical specifications, custom configurations, or pricing, contact Ladhani Metal Corporation today.

DIN 2634 super duplex steel flanges PN 25 are high-performance weld neck flanges designed in accordance with the DIN 2634 standard. These flanges are engineered for high-pressure systems operating up to 25 bar (362 psi) and are manufactured from premium super duplex stainless steel grades. Known for their superior strength, excellent corrosion resistance, and enhanced resistance to stress corrosion cracking and pitting, super duplex flanges are ideally suited for demanding industrial environments. Their robust mechanical properties make them a reliable choice for aggressive service conditions and high-pressure applications. Ladhani Metal Corporation is a global leader in the manufacturing and supply of super duplex steel flanges. With advanced production facilities, precision engineering capabilities, and rigorous quality assurance practices, the company ensures that each flange meets the highest standards of safety, durability, and performance under extreme conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Designed for systems requiring high strength and exceptional corrosion resistance under elevated pressure conditions. Flange Type: • Weld Neck Flanges Featuring a tapered hub design, weld neck flanges deliver optimal stress distribution and secure, leak-free connections in systems exposed to thermal and mechanical loading. • Flat Face (FF) Flanges Recommended for use with softer gasket materials or systems incorporating cast iron components, flat face flanges provide uniform gasket compression and reliable sealing. Super Duplex Steel Grades and Typical Composition: Super Duplex Steel (UNS S32750 / S32760) – Ferritic-Austenitic Stainless Steel • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 5.0% • Nitrogen (N): 0.2 – 0.3% • Iron (Fe): Balance Applications: Widely used in environments where high strength, corrosion resistance, and resistance to chloride-induced stress corrosion cracking are essential, such as offshore platforms, chemical plants, and desalination facilities. Applications of DIN 2634 Super Duplex Steel Flanges PN 25: • Offshore and Subsea Installations Withstand chloride-rich marine environments, offering long-term durability and resistance to seawater corrosion. • Chemical and Petrochemical Processing Suitable for handling aggressive chemicals, acids, and solvents under high pressure and temperature conditions. • Desalination and Water Treatment Plants Perform reliably in saline and brine-rich environments with superior resistance to pitting and crevice corrosion. • Power Generation and Heat Exchangers Offer excellent performance in high-temperature, high-pressure applications requiring strength and corrosion protection. • Pulp and Paper Industry Operate effectively in harsh chemical environments including bleach and acidic processing streams. Key Features: • Manufactured to DIN 2634 specifications for dimensional accuracy and pressure handling • PN 25 pressure class supports high-performance applications • Superior resistance to localized corrosion including pitting and stress corrosion cracking • High strength-to-weight ratio and excellent mechanical properties • Weld neck design ensures structural integrity and resistance to fatigue • Available in both UNS S32750 and S32760 super duplex grades • Customizable in size, pressure class, and surface finish upon request Conclusion: DIN 2634 super duplex steel flanges PN 25 from Ladhani Metal Corporation are engineered to deliver top-tier performance in environments where mechanical strength and corrosion resistance are non-negotiable. Their robust construction and excellent durability make them ideal for marine, chemical, and industrial applications operating under high pressure. For detailed specifications, project consultations, or a custom quote, contact Ladhani Metal Corporation today.

DIN 2633 carbon steel flanges PN 16 are reliable weld neck flanges manufactured in compliance with the DIN 2633 standard. Designed for use in medium-pressure piping systems with a pressure rating of up to 16 bar (232 psi), these flanges are fabricated from high-quality carbon steel, providing dependable mechanical strength and ease of fabrication. They are widely utilized in a range of general industrial and utility applications where corrosion resistance demands are moderate. Ladhani Metal Corporation is a globally trusted manufacturer and supplier of carbon steel flanges, recognized for high-precision production, rigorous quality assurance, and strict adherence to international material and dimensional standards. Every flange is tested to ensure consistent performance, mechanical integrity, and compatibility with a variety of piping systems. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for medium-pressure systems requiring strong, cost-effective, and durable connections. Flange Type: • Weld Neck Flanges Featuring an extended tapered hub, weld neck flanges help evenly distribute mechanical stress and ensure secure, vibration-resistant joints, particularly effective in systems subject to bending or thermal expansion. • Flat Face (FF) Flanges Ideal for use with soft gaskets or cast iron components, flat face flanges ensure even gasket compression, reducing the risk of flange warping or over-tightening. Carbon Steel Grades and General Composition: Typical Carbon Steel Grade: ASTM A105 (for forged carbon steel flanges) • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% • Iron (Fe): Balance Applications: Carbon steel flanges to DIN 2633 PN 16 are widely applied in environments where corrosion resistance is not the primary concern but where mechanical strength, weldability, and cost-efficiency are essential. Applications of DIN 2633 Carbon Steel Flanges PN 16: • Power Plants Used in steam, water, and air systems for medium-pressure operations. • Water Treatment and Distribution Well-suited for water mains, treatment facilities, and irrigation networks where strength and reliability are critical. • Petrochemical and Refining Industries Employed in non-corrosive process piping, utility lines, and support systems. • HVAC and Fire Protection Systems Ideal for chilled water, fire suppression, and compressed air applications. • General Industrial Manufacturing Used in structural piping systems and mechanical infrastructure with stable temperature and pressure conditions. Key Features: • Manufactured to DIN 2633 specifications • PN 16 pressure rating for medium-duty service • Weld neck configuration provides robust, leak-resistant connections • Cost-effective and easy to fabricate and install • Excellent machinability and weldability • Available in various sizes and configurations • Coating and corrosion protection options available upon request Conclusion: DIN 2633 carbon steel flanges PN 16 from Ladhani Metal Corporation are engineered for dependable performance in standard industrial environments. With proven strength, versatility, and affordability, these flanges are a reliable choice for water, steam, gas, and general utility applications. For detailed technical specifications, custom options, or pricing inquiries, contact Ladhani Metal Corporation today.

DIN 2633 duplex steel flanges PN 16 are precision-manufactured weld neck flanges designed according to the DIN 2633 standard, ideal for medium-pressure piping systems operating up to 16 bar (232 psi). These flanges are crafted from duplex stainless steels that combine the benefits of austenitic and ferritic microstructures, offering excellent mechanical strength, superior resistance to stress corrosion cracking, and enhanced durability in aggressive chemical and chloride-containing environments. They are ideal for applications where both corrosion resistance and high strength are essential. Ladhani Metal Corporation is a leading global manufacturer and supplier of duplex steel flanges, recognized for high-quality production, dimensional accuracy, and strict compliance with international standards. All flanges undergo rigorous inspection and testing to ensure reliable performance in challenging industrial conditions. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for medium-pressure pipelines requiring corrosion resistance and increased mechanical integrity. Flange Type: • Weld Neck Flanges These flanges feature a long tapered hub for improved flow characteristics and reduced mechanical stress at the weld area, ensuring stable and secure connections. • Flat Face (FF) Flanges Designed to provide a consistent sealing surface, especially effective when used with soft gaskets or when connecting to cast components. Duplex Steel Grades and Full Composition: Duplex 2205 (UNS S31803/S32205) • Chromium (Cr): 21.0 – 23.0% • Nickel (Ni): 4.5 – 6.5% • Molybdenum (Mo): 2.5 – 3.5% • Nitrogen (N): 0.08 – 0.20% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Carbon (C): ≤ 0.03% • Phosphorus (P): ≤ 0.03% • Sulfur (S): ≤ 0.02% • Iron (Fe): Balance Applications: Widely used in desalination plants, chemical process vessels, marine environments, and pulp and paper industries due to high strength and resistance to localized corrosion. Super Duplex 2507 (UNS S32750) • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 5.0% • Nitrogen (N): 0.24 – 0.32% • Manganese (Mn): ≤ 1.2% • Silicon (Si): ≤ 0.8% • Carbon (C): ≤ 0.03% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.02% • Iron (Fe): Balance Applications: Preferred in highly corrosive offshore, oil and gas, chemical, and high-chloride environments where superior strength and corrosion resistance are essential. Applications of DIN 2633 Duplex Steel Flanges PN 16: • Chemical and Petrochemical Plants Provides strong and corrosion-resistant connections for chemical reactors, storage tanks, and acid-handling systems. • Marine and Offshore Engineering Suitable for submerged systems, seawater cooling, and ballast water piping due to excellent resistance to chloride-induced corrosion. • Pulp and Paper Industry Performs reliably in bleaching and chemical recovery processes where both chemical resistance and strength are required. • Desalination and Water Treatment Ideal for high-salinity water systems and reverse osmosis pipelines requiring durable, corrosion-resistant components. • Oil and Gas Refineries Used in pipelines, pressure vessels, and heat exchangers subjected to sour gas and high-pressure operating environments. Key Features: • Manufactured to DIN 2633 standard • PN 16 pressure class for medium-pressure service • Weld neck configuration supports vibration resistance and proper alignment • Available in Duplex 2205 and Super Duplex 2507 grades • High resistance to stress corrosion cracking, pitting, and crevice corrosion • Excellent mechanical strength and fatigue resistance • Custom sizes, finishes, and specifications available upon request Conclusion: DIN 2633 duplex steel flanges PN 16 from Ladhani Metal Corporation offer an optimal combination of strength, corrosion resistance, and reliability for use in harsh industrial conditions. With high-performance duplex and super duplex materials, these flanges are the preferred choice for applications in chemical processing, offshore platforms, and desalination plants. For detailed technical support, customized configurations, or pricing, contact Ladhani Metal Corporation today.