Product Name: Titanium rod grade 23 Standard: ASTM F136 Material: Gr23 (Gr5 ELI) Unit Price: $30.5 usd/kg- $52.5 usd/kg Application: Medical use Shape: Round Diameter: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm etc. Length: 1000mm, 3000mm, 6000mm or as per your request Surface: Bright Product Introduction Product name:Titanium rod grade 23 Material: GR23 Standard: ASTM F136 Diameter: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm etc. Length: 1000mm, 3000mm, 6000mm or as per your request Surface: Polishing,Bright Third-Party Tests: BV, SGS, TUV etc. Grade 23 is a higher purity version of Ti 6Al-4V. It can be made into coils, strands, wires or flat wires and is the first choice for any occasion that requires a combination of high strength, light weight, good corrosion resistance and high toughness. It has excellenct damage resistance superior to other alloys. These advantages make Ti 6AL-4V ELI the final dental and medical titanium grade product. Due to its biocompatibility, good fatigue strength and lo mdulus, it can be used in biomedical applications such as implantable parts. Grade 23 can also be used in detailed surgical procedures, such as: • Orthopedic pins and screws • Orthopedic cables • Ligation needles • Surgical staples • Springs • Orthodontic appliances • Joint replacements • Cryogenic containers • Bone fixators Mechanical Properties: Grade Tensile strength, MPa (min) Yield strength, MPa (min) Elongation, %(min) Reduction of Area, %(min) Gr23 828 759 10 15 Chemical Component (ASTM B348) Grade Ti Al V N, max C, max H, max Fe, max O, max Residuals Max each Max total Gr23 Main 5.5-6.5 3.5-4.5 0.03 0.08 0.0125 0.25 0.13 0.1 0.4

"LADHANI METAL CORPORATION is a professional Manufacturer of Stainless Steel Butt Weld , Socket Weld and Threaded Fittin.we have been producing A403/A403M-99a , A774/A774M-98, A182/182M , A182/A182M, A778 - A778-98 Stainless Steel Threaded Full Coupling since 1988. We are Manufacturer of Stainless Steel Threaded Full Coupling , Our products are manufactured using quality material and go through a rigorous quality check at all stages of production to ensure quality. LMC has an extensive history of Stainless Steel Threaded Full Coupling Manufacturing in india, and Exporting and Trading.We are India Origin Factory of Stainless Steel Threaded Full Coupling We at LMC has a wide selection at great prices to help you get creative. All the Stainless Steel Threaded Full Coupling are quality guaranteed. If you have any question, please feel free to contact us. Dimension Spec : ANSI B16.9, B16.28 , MSS SP-43 , SP-79 We Export Quality Fittings to United Arab Emirates,Qatar,Kuwait,Bahrain,Oman,Saudi Arabia,Iran." Stainless Steel Threaded Full Coupling Available In 1.4002, 1.4002, 1.4006, 1.4016, 1.4021, 1.4057, 1.4301, 1.4307, 1.431, 1.4311, 1.4313, 1.4318, 1.4362, 1.4371, 1.4401, 1.4404, 1.4429, 1.4438, 1.4462, 1.4509, 1.4512, 1.4541, 1.455, 1.4571, 1.4828, 1.4833, 1.4845, 201, 202, 301, 304, 309, 310, 316, 317, 321, 347, 405, 409, 410, 420, 430, 431, 436, 439, 2205, 2304, 00Cr17Ni14Mo2, 00Cr18Ti, 00Cr19Ni13Mo3, 08Ch18N10T, 08Ch18N12B, 0Cr13, 0Cr13Al, 0Cr17Ni12Mo2, 0Cr18Ni10Ti, 0Cr18Ni11Nb, 0Cr18Ni12Mo2Ti, 0Cr18Ni9, 0Cr25Ni20, 10Ch17N13M2T, 1Cr12, 1Cr17, 1Cr17Ni2, 1Cr17Ni7, 1Cr23Ni13, 201L, 201LN, 20Ch17N2, 20Ch23N18, 20Ch25N20S2, 301L, 301LN, 304H, 304L, 304LN, 309S, 310S, 316L, 316LN, 316Ti, 317L, 317LN, 410S, 436L, J-201, J-201L, J-201LN, J-202, J-204 Cu, J-2205, J-2304, J-301, J301L, J301LN, J-304, J-304H, J-304L, J-304LN, J-309, J-309S, J-310, J-310S, J-316, J-316L, J-316LN, J-316Ti, J-317, J31727, J-317L, J-317LN, J-31803, J-321, J-347, J-4, J-405, J-409, J-409M, J-409RC, J-410, J-410S, J-415, J-420, J-430, J-430Ti, J-431, J-436, J-436L, J-439, J-441, JBS, JSLAUS (J1), S20100, S20103, S20153, S20200, S20430, S30100, S30103, S30153, S30400, S30403, S30409, S30453, S30900, S30908, S31000, S31008, S31600, S31603, S31635, S31653, S31700, S31703, S31727, S31753, S31803, S32100, S32205, S32304, S34700, S40500, S40900, S41000, S41008, S41500, S42000, S43000, S43035, S43100, S43600, S43932, S43940, SUH310, SUH409, SUS201, SUS202, SUS301, SUS304, SUS304L, SUS304LN, SUS309S, SUS310S, SUS316, SUS316L, SUS316Ti, SUS317L, SUS321, SUS329J3L, SUS347, SUS403, SUS405, SUS410, SUS420JI, SUS430, SUS430LX, SUS436L, X02Cr17Ni12Mo2, X04Cr12, X04Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Nb, X04Cr18Ni10Ti, X04Cr19Ni9, X07Cr17, X10Cr17Mn6Ni4N20, X10Cr17Ni7, X10Cr18Mn9Ni5, X12Cr12, X12Cr13, X12CrMnNiN17-7-5, X12CrMnNiN18-9-5, X12CrNi17-7, X12CrNi25-21, X15Cr24Ni13, X15CrNiSi25-20, X17CrNi15-2, X20Cr13, X20Cr13, X20Cr25Ni20, X2CrMnNiN17-7-5, X2CrN N 23-4, X2CrNi18-9, X2CrNiMo17-13-2, X2CrNiMo18154, X2CrNiMoN 22-5-3, X2CrNiMoN17-11-2 SUS316LN, X2CrNiN18-10, X2CrNiN18-7, X2CrTi12, X2CrTiNb18, X3CrNiMo13-4, X3CrTi17, X3CrTi17, X5CrNi18-10, X5CrNiMo17-12-2, X6Cr-13, X6Cr17, X6CrAl13, X6CrNiMoTi17-12-2, X6CrNiNb18-10, X6CrNiTi18-10

"LADHANI METAL CORPORATION is a professional Manufacturer of Stainless Steel Butt Weld , Socket Weld and Threaded Fittin.we have been producing A403/A403M-99a , A774/A774M-98, A182/182M , A182/A182M, A778 - A778-98 Stainless Steel Threaded Reducing Tee since 1988. We are Manufacturer of Stainless Steel Threaded Reducing Tee , Our products are manufactured using quality material and go through a rigorous quality check at all stages of production to ensure quality. LMC has an extensive history of Stainless Steel Threaded Reducing Tee Manufacturing in india, and Exporting and Trading.We are India Origin Factory of Stainless Steel Threaded Reducing Tee We at LMC has a wide selection at great prices to help you get creative. All the Stainless Steel Threaded Reducing Tee are quality guaranteed. If you have any question, please feel free to contact us. Dimension Spec : ANSI B16.9, B16.28 , MSS SP-43 , SP-79 We Export Quality Fittings to United Arab Emirates,Qatar,Kuwait,Bahrain,Oman,Saudi Arabia,Iran." Stainless Steel Threaded Reducing Tee Available In 1.4002, 1.4002, 1.4006, 1.4016, 1.4021, 1.4057, 1.4301, 1.4307, 1.431, 1.4311, 1.4313, 1.4318, 1.4362, 1.4371, 1.4401, 1.4404, 1.4429, 1.4438, 1.4462, 1.4509, 1.4512, 1.4541, 1.455, 1.4571, 1.4828, 1.4833, 1.4845, 201, 202, 301, 304, 309, 310, 316, 317, 321, 347, 405, 409, 410, 420, 430, 431, 436, 439, 2205, 2304, 00Cr17Ni14Mo2, 00Cr18Ti, 00Cr19Ni13Mo3, 08Ch18N10T, 08Ch18N12B, 0Cr13, 0Cr13Al, 0Cr17Ni12Mo2, 0Cr18Ni10Ti, 0Cr18Ni11Nb, 0Cr18Ni12Mo2Ti, 0Cr18Ni9, 0Cr25Ni20, 10Ch17N13M2T, 1Cr12, 1Cr17, 1Cr17Ni2, 1Cr17Ni7, 1Cr23Ni13, 201L, 201LN, 20Ch17N2, 20Ch23N18, 20Ch25N20S2, 301L, 301LN, 304H, 304L, 304LN, 309S, 310S, 316L, 316LN, 316Ti, 317L, 317LN, 410S, 436L, J-201, J-201L, J-201LN, J-202, J-204 Cu, J-2205, J-2304, J-301, J301L, J301LN, J-304, J-304H, J-304L, J-304LN, J-309, J-309S, J-310, J-310S, J-316, J-316L, J-316LN, J-316Ti, J-317, J31727, J-317L, J-317LN, J-31803, J-321, J-347, J-4, J-405, J-409, J-409M, J-409RC, J-410, J-410S, J-415, J-420, J-430, J-430Ti, J-431, J-436, J-436L, J-439, J-441, JBS, JSLAUS (J1), S20100, S20103, S20153, S20200, S20430, S30100, S30103, S30153, S30400, S30403, S30409, S30453, S30900, S30908, S31000, S31008, S31600, S31603, S31635, S31653, S31700, S31703, S31727, S31753, S31803, S32100, S32205, S32304, S34700, S40500, S40900, S41000, S41008, S41500, S42000, S43000, S43035, S43100, S43600, S43932, S43940, SUH310, SUH409, SUS201, SUS202, SUS301, SUS304, SUS304L, SUS304LN, SUS309S, SUS310S, SUS316, SUS316L, SUS316Ti, SUS317L, SUS321, SUS329J3L, SUS347, SUS403, SUS405, SUS410, SUS420JI, SUS430, SUS430LX, SUS436L, X02Cr17Ni12Mo2, X04Cr12, X04Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Nb, X04Cr18Ni10Ti, X04Cr19Ni9, X07Cr17, X10Cr17Mn6Ni4N20, X10Cr17Ni7, X10Cr18Mn9Ni5, X12Cr12, X12Cr13, X12CrMnNiN17-7-5, X12CrMnNiN18-9-5, X12CrNi17-7, X12CrNi25-21, X15Cr24Ni13, X15CrNiSi25-20, X17CrNi15-2, X20Cr13, X20Cr13, X20Cr25Ni20, X2CrMnNiN17-7-5, X2CrN N 23-4, X2CrNi18-9, X2CrNiMo17-13-2, X2CrNiMo18154, X2CrNiMoN 22-5-3, X2CrNiMoN17-11-2 SUS316LN, X2CrNiN18-10, X2CrNiN18-7, X2CrTi12, X2CrTiNb18, X3CrNiMo13-4, X3CrTi17, X3CrTi17, X5CrNi18-10, X5CrNiMo17-12-2, X6Cr-13, X6Cr17, X6CrAl13, X6CrNiMoTi17-12-2, X6CrNiNb18-10, X6CrNiTi18-10

"LADHANI METAL CORPORATION is a professional Manufacturer of Stainless Steel Butt Weld , Socket Weld and Threaded Fittin.we have been producing A403/A403M-99a , A774/A774M-98, A182/182M , A182/A182M, A778 - A778-98 Stainless Steel Socket Weld Reducing Elbow since 1988. We are Manufacturer of Stainless Steel Socket Weld Reducing Elbow , Our products are manufactured using quality material and go through a rigorous quality check at all stages of production to ensure quality. LMC has an extensive history of Stainless Steel Socket Weld Reducing Elbow Manufacturing in india, and Exporting and Trading.We are India Origin Factory of Stainless Steel Socket Weld Reducing Elbow We at LMC has a wide selection at great prices to help you get creative. All the Stainless Steel Socket Weld Reducing Elbow are quality guaranteed. If you have any question, please feel free to contact us. Dimension Spec : ANSI B16.9, B16.28 , MSS SP-43 , SP-79 We Export Quality Fittings to United Arab Emirates,Qatar,Kuwait,Bahrain,Oman,Saudi Arabia,Iran." Stainless Steel Socket Weld Reducing Elbow Available In 1.4002, 1.4002, 1.4006, 1.4016, 1.4021, 1.4057, 1.4301, 1.4307, 1.431, 1.4311, 1.4313, 1.4318, 1.4362, 1.4371, 1.4401, 1.4404, 1.4429, 1.4438, 1.4462, 1.4509, 1.4512, 1.4541, 1.455, 1.4571, 1.4828, 1.4833, 1.4845, 201, 202, 301, 304, 309, 310, 316, 317, 321, 347, 405, 409, 410, 420, 430, 431, 436, 439, 2205, 2304, 00Cr17Ni14Mo2, 00Cr18Ti, 00Cr19Ni13Mo3, 08Ch18N10T, 08Ch18N12B, 0Cr13, 0Cr13Al, 0Cr17Ni12Mo2, 0Cr18Ni10Ti, 0Cr18Ni11Nb, 0Cr18Ni12Mo2Ti, 0Cr18Ni9, 0Cr25Ni20, 10Ch17N13M2T, 1Cr12, 1Cr17, 1Cr17Ni2, 1Cr17Ni7, 1Cr23Ni13, 201L, 201LN, 20Ch17N2, 20Ch23N18, 20Ch25N20S2, 301L, 301LN, 304H, 304L, 304LN, 309S, 310S, 316L, 316LN, 316Ti, 317L, 317LN, 410S, 436L, J-201, J-201L, J-201LN, J-202, J-204 Cu, J-2205, J-2304, J-301, J301L, J301LN, J-304, J-304H, J-304L, J-304LN, J-309, J-309S, J-310, J-310S, J-316, J-316L, J-316LN, J-316Ti, J-317, J31727, J-317L, J-317LN, J-31803, J-321, J-347, J-4, J-405, J-409, J-409M, J-409RC, J-410, J-410S, J-415, J-420, J-430, J-430Ti, J-431, J-436, J-436L, J-439, J-441, JBS, JSLAUS (J1), S20100, S20103, S20153, S20200, S20430, S30100, S30103, S30153, S30400, S30403, S30409, S30453, S30900, S30908, S31000, S31008, S31600, S31603, S31635, S31653, S31700, S31703, S31727, S31753, S31803, S32100, S32205, S32304, S34700, S40500, S40900, S41000, S41008, S41500, S42000, S43000, S43035, S43100, S43600, S43932, S43940, SUH310, SUH409, SUS201, SUS202, SUS301, SUS304, SUS304L, SUS304LN, SUS309S, SUS310S, SUS316, SUS316L, SUS316Ti, SUS317L, SUS321, SUS329J3L, SUS347, SUS403, SUS405, SUS410, SUS420JI, SUS430, SUS430LX, SUS436L, X02Cr17Ni12Mo2, X04Cr12, X04Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Nb, X04Cr18Ni10Ti, X04Cr19Ni9, X07Cr17, X10Cr17Mn6Ni4N20, X10Cr17Ni7, X10Cr18Mn9Ni5, X12Cr12, X12Cr13, X12CrMnNiN17-7-5, X12CrMnNiN18-9-5, X12CrNi17-7, X12CrNi25-21, X15Cr24Ni13, X15CrNiSi25-20, X17CrNi15-2, X20Cr13, X20Cr13, X20Cr25Ni20, X2CrMnNiN17-7-5, X2CrN N 23-4, X2CrNi18-9, X2CrNiMo17-13-2, X2CrNiMo18154, X2CrNiMoN 22-5-3, X2CrNiMoN17-11-2 SUS316LN, X2CrNiN18-10, X2CrNiN18-7, X2CrTi12, X2CrTiNb18, X3CrNiMo13-4, X3CrTi17, X3CrTi17, X5CrNi18-10, X5CrNiMo17-12-2, X6Cr-13, X6Cr17, X6CrAl13, X6CrNiMoTi17-12-2, X6CrNiNb18-10, X6CrNiTi18-10

"LADHANI METAL CORPORATION is a professional Manufacturer of Stainless Steel Butt Weld , Socket Weld and Threaded Fittin.we have been producing A403/A403M-99a , A774/A774M-98, A182/182M , A182/A182M, A778 - A778-98 Stainless Steel Forged Unions since 1988. We are Manufacturer of Stainless Steel Forged Unions , Our products are manufactured using quality material and go through a rigorous quality check at all stages of production to ensure quality. LMC has an extensive history of Stainless Steel Forged Unions Manufacturing in india, and Exporting and Trading.We are India Origin Factory of Stainless Steel Forged Unions We at LMC has a wide selection at great prices to help you get creative. All the Stainless Steel Forged Unions are quality guaranteed. If you have any question, please feel free to contact us. Dimension Spec : ANSI B16.9, B16.28 , MSS SP-43 , SP-79 We Export Quality Fittings to United Arab Emirates,Qatar,Kuwait,Bahrain,Oman,Saudi Arabia,Iran." Stainless Steel Forged Unions Available In 1.4002, 1.4002, 1.4006, 1.4016, 1.4021, 1.4057, 1.4301, 1.4307, 1.431, 1.4311, 1.4313, 1.4318, 1.4362, 1.4371, 1.4401, 1.4404, 1.4429, 1.4438, 1.4462, 1.4509, 1.4512, 1.4541, 1.455, 1.4571, 1.4828, 1.4833, 1.4845, 201, 202, 301, 304, 309, 310, 316, 317, 321, 347, 405, 409, 410, 420, 430, 431, 436, 439, 2205, 2304, 00Cr17Ni14Mo2, 00Cr18Ti, 00Cr19Ni13Mo3, 08Ch18N10T, 08Ch18N12B, 0Cr13, 0Cr13Al, 0Cr17Ni12Mo2, 0Cr18Ni10Ti, 0Cr18Ni11Nb, 0Cr18Ni12Mo2Ti, 0Cr18Ni9, 0Cr25Ni20, 10Ch17N13M2T, 1Cr12, 1Cr17, 1Cr17Ni2, 1Cr17Ni7, 1Cr23Ni13, 201L, 201LN, 20Ch17N2, 20Ch23N18, 20Ch25N20S2, 301L, 301LN, 304H, 304L, 304LN, 309S, 310S, 316L, 316LN, 316Ti, 317L, 317LN, 410S, 436L, J-201, J-201L, J-201LN, J-202, J-204 Cu, J-2205, J-2304, J-301, J301L, J301LN, J-304, J-304H, J-304L, J-304LN, J-309, J-309S, J-310, J-310S, J-316, J-316L, J-316LN, J-316Ti, J-317, J31727, J-317L, J-317LN, J-31803, J-321, J-347, J-4, J-405, J-409, J-409M, J-409RC, J-410, J-410S, J-415, J-420, J-430, J-430Ti, J-431, J-436, J-436L, J-439, J-441, JBS, JSLAUS (J1), S20100, S20103, S20153, S20200, S20430, S30100, S30103, S30153, S30400, S30403, S30409, S30453, S30900, S30908, S31000, S31008, S31600, S31603, S31635, S31653, S31700, S31703, S31727, S31753, S31803, S32100, S32205, S32304, S34700, S40500, S40900, S41000, S41008, S41500, S42000, S43000, S43035, S43100, S43600, S43932, S43940, SUH310, SUH409, SUS201, SUS202, SUS301, SUS304, SUS304L, SUS304LN, SUS309S, SUS310S, SUS316, SUS316L, SUS316Ti, SUS317L, SUS321, SUS329J3L, SUS347, SUS403, SUS405, SUS410, SUS420JI, SUS430, SUS430LX, SUS436L, X02Cr17Ni12Mo2, X04Cr12, X04Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Nb, X04Cr18Ni10Ti, X04Cr19Ni9, X07Cr17, X10Cr17Mn6Ni4N20, X10Cr17Ni7, X10Cr18Mn9Ni5, X12Cr12, X12Cr13, X12CrMnNiN17-7-5, X12CrMnNiN18-9-5, X12CrNi17-7, X12CrNi25-21, X15Cr24Ni13, X15CrNiSi25-20, X17CrNi15-2, X20Cr13, X20Cr13, X20Cr25Ni20, X2CrMnNiN17-7-5, X2CrN N 23-4, X2CrNi18-9, X2CrNiMo17-13-2, X2CrNiMo18154, X2CrNiMoN 22-5-3, X2CrNiMoN17-11-2 SUS316LN, X2CrNiN18-10, X2CrNiN18-7, X2CrTi12, X2CrTiNb18, X3CrNiMo13-4, X3CrTi17, X3CrTi17, X5CrNi18-10, X5CrNiMo17-12-2, X6Cr-13, X6Cr17, X6CrAl13, X6CrNiMoTi17-12-2, X6CrNiNb18-10, X6CrNiTi18-10

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-designed components used to protect boiler, superheater, and heat exchanger tubes from erosion, slag accumulation, scaling, and high-temperature oxidation. These shields are essential for industrial systems exposed to intense thermal cycling, high-velocity flue gases, and corrosive atmospheres. Their half-round form ensures quick and secure installation over curved or straight tube surfaces, significantly enhancing tube durability and reducing downtime. 1Cr20Ni14Si2 U Type Outer Half Round Tube Shield The 1Cr20Ni14Si2 U Type Outer Half Round Tube Shield is made from a high-performance austenitic stainless steel alloy containing 20% chromium, 14% nickel, and approximately 2% silicon. This alloy provides excellent resistance to oxidation, high-temperature corrosion, and thermal fatigue, especially in oxidizing and carburizing environments. The outer U-type design is specifically intended to protect the outer arc of U-bend tubes in boilers, reformers, and heat exchangers, where flame, gas flow, and slag buildup cause the most wear. • Outer U Type Half Round Tube Shield – Shields the outer curvature of U-bend tubes from flame impingement, gas erosion, slag attack, and thermal scaling. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of 1Cr20Ni14Si2 U Type Outer Half Round Tube Shields, offering custom-built shielding solutions for critical high-temperature and industrial systems. Chemical Composition of 1Cr20Ni14Si2 – Austenitic Heat-Resistant Stainless Steel • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.50 – 2.50% • Chromium (Cr): 19.0 – 21.0% • Nickel (Ni): 13.0 – 15.0% • Iron (Fe): Balance Applications: Best suited for high-temperature, oxidizing environments in power generation, chemical processing, and furnace systems where excellent thermal and scaling resistance are required. Uses • Outer arc protection for U-bend tubes in superheaters and reheaters in thermal power plants • Shields return bends in heat exchangers and steam reformers exposed to hot gases and flame • Used in waste heat recovery boilers (WHRBs) and HRSGs to prevent surface oxidation and slag damage • Suitable for petrochemical and chemical reactors operating under oxidizing or mildly carburizing conditions • Applied in high-temperature industrial furnaces, incinerators, and reforming equipment Features • Excellent high-temperature resistance – Withstands service temperatures up to 1100°C with minimal deformation or scaling • Oxidation and corrosion resistance – High Cr-Ni-Si composition forms a stable oxide layer for prolonged exposure protection • Outer bend coverage – Provides critical protection for the most exposed and erosion-prone section of U-bend tubes • Custom fabrication – Manufactured to match exact tube radius and diameter, ensuring a precise and stable fit • Easy installation – Secured with clamps, tack welds, or stainless steel banding without disassembly • Long-lasting performance – Enhances operational life and minimizes costly tube replacements in aggressive environments Applications • thermal and power generation – Protects outer U-bend tube surfaces from slag, soot, and flue gas corrosion • petrochemical and refining – Shields return bends in reformers and heaters exposed to oxidizing and sulfur-rich gases • waste heat recovery – Guards outer tube arcs in WHRBs and HRSGs against scaling and erosion • metallurgy and cement processing – Used in high-temperature pipelines and ducts in furnaces and kilns • process heating systems – Ideal for environments involving intense flame exposure and cyclic thermal loads Conclusion The 1Cr20Ni14Si2 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a highly durable, heat-resistant shielding solution for protecting U-bend tube outer surfaces in extreme industrial environments. With superior resistance to oxidation, scaling, and thermal fatigue, it ensures long-term reliability and efficiency in power plants, reformers, and furnace systems. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation

DIN 2634 carbon steel flanges PN 25 are high-strength weld neck flanges manufactured according to the DIN 2634 standard. Specifically designed for use in high-pressure piping systems operating up to 25 bar (362 psi), these flanges offer excellent mechanical performance and are suitable for a wide range of industrial applications. Manufactured from quality carbon steel, they provide strong, durable, and cost-effective solutions for systems where corrosion resistance requirements are moderate but structural integrity is critical. Ladhani Metal Corporation is a recognized manufacturer and global supplier of carbon steel flanges, known for precision engineering, strict adherence to international standards, and advanced production capabilities. Each flange is subject to comprehensive testing and inspection to ensure reliability and consistent performance under demanding operating conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Suitable for medium to high-pressure applications where strength and impact resistance are essential. Flange Type: • Weld Neck Flanges Designed with a tapered hub to ensure smooth transition from flange to pipe, weld neck flanges are ideal for systems experiencing frequent thermal cycling, pressure fluctuations, and mechanical stress. • Flat Face (FF) Flanges Recommended for use with gaskets made from soft materials or when connecting to cast iron components, flat face flanges ensure even gasket compression and reliable sealing performance. Carbon Steel Grades and Typical Composition: Carbon Steel (ASTM A105 / C22.8 equivalent) – Forged Carbon Steel • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% • Iron (Fe): Balance Applications: Commonly used in oil and gas, petrochemical, water transmission, and power generation industries, especially in applications where high mechanical strength and pressure handling are more critical than corrosion resistance. Applications of DIN 2634 Carbon Steel Flanges PN 25: • Oil and Gas Pipelines Widely used in upstream and downstream systems for fluid transport under high pressure. • Petrochemical and Refining Plants Efficiently handles high-pressure flow systems involving hydrocarbons and steam. • Power Plants and Boiler Systems Suited for high-pressure steam and water lines, offering excellent tensile strength and fatigue resistance. • Water and Wastewater Infrastructure Used in municipal and industrial pipelines requiring cost-effective, robust flange connections. • General Industrial Systems Applicable in a wide range of mechanical systems and processing plants handling non-corrosive or mildly corrosive media. Key Features: • Compliant with DIN 2634 pressure and dimensional standards • PN 25 rating ensures compatibility with high-pressure pipelines • High tensile and yield strength for demanding structural requirements • Weld neck design enhances resistance to vibration and thermal expansion • Cost-effective solution for pressure-bearing connections • Available in standard and custom sizes, surface finishes, and pressure ratings • Heat treatment and coating options available upon request Conclusion: DIN 2634 carbon steel flanges PN 25 from Ladhani Metal Corporation provide a robust and economical solution for high-pressure systems where mechanical performance is essential. Their strength, reliability, and adaptability make them a preferred choice across industries such as oil and gas, power generation, and water infrastructure. For technical specifications, custom configurations, or pricing, contact Ladhani Metal Corporation today.

DIN 2634 duplex steel flanges PN 25 are high-performance weld neck flanges manufactured in accordance with the DIN 2634 standard. Specifically designed for high-pressure applications up to 25 bar (362 psi), these flanges are made from premium duplex stainless steel grades, offering exceptional corrosion resistance, excellent mechanical strength, and superior resistance to stress corrosion cracking in harsh environments. Their robust construction makes them ideal for demanding industrial applications where reliability and durability are critical. Ladhani Metal Corporation is a trusted global manufacturer and supplier of duplex steel flanges, known for advanced manufacturing capabilities, precision machining, and strict adherence to international quality standards. Each flange undergoes thorough inspection and testing to ensure long-term reliability, safety, and resistance to extreme operating conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Designed for high-pressure systems requiring corrosion-resistant and mechanically robust flange connections. Flange Type: • Weld Neck Flanges Featuring an extended tapered hub, weld neck flanges provide excellent stress distribution at the base, ensuring strong and leak-proof joints in systems exposed to high pressure and thermal cycling. • Flat Face (FF) Flanges Ideal for use with softer gasket materials or in systems connecting to cast components, flat face flanges offer consistent and uniform gasket compression. Duplex Steel Grades and Typical Composition: Duplex Stainless Steel 2205 (UNS S32205 / S31803) • Chromium (Cr): 21 – 23% • Nickel (Ni): 4.5 – 6.5% • Molybdenum (Mo): 2.5 – 3.5% • Nitrogen (N): 0.14 – 0.20% • Iron (Fe): Balance Applications: Preferred in environments with chloride exposure, such as seawater, chemical processing, and pulp and paper industries, due to excellent resistance to pitting, crevice corrosion, and stress corrosion cracking. Duplex Stainless Steel 2507 (UNS S32750) – Super Duplex • Chromium (Cr): 24 – 26% • Nickel (Ni): 6 – 8% • Molybdenum (Mo): 3.5 – 4.5% • Nitrogen (N): 0.24 – 0.32% • Iron (Fe): Balance Applications: Used in the most aggressive environments including offshore oil and gas, desalination plants, and chemical processing where enhanced corrosion resistance and high mechanical strength are critical. Applications of DIN 2634 Duplex Steel Flanges PN 25: • Offshore and Marine Systems Resists corrosion from seawater and aggressive chloride environments while maintaining strength under pressure. • Chemical and Petrochemical Processing Ideal for transporting corrosive chemicals such as acids, alkalis, and chlorides at elevated pressures. • Desalination Plants Performs exceptionally in saltwater treatment systems exposed to high pressure and corrosive media. • Oil and Gas Industry Used in pipelines and pressure vessels requiring resistance to chloride-induced stress corrosion cracking. • Pulp and Paper Industry Applied in aggressive bleaching and chemical processing environments. Key Features: • Manufactured in accordance with DIN 2634 dimensional and pressure requirements • PN 25 pressure rating supports high-pressure applications • Excellent corrosion resistance including pitting, crevice, and stress corrosion cracking resistance • Superior mechanical strength and toughness at elevated temperatures • Weld neck configuration ensures strong, vibration-resistant joints • Available in standard duplex and super duplex grades • Custom sizes, pressure classes, and surface finishes available upon request Conclusion: DIN 2634 duplex steel flanges PN 25 from Ladhani Metal Corporation are engineered for challenging environments where corrosion resistance, mechanical strength, and pressure integrity are critical. With superior durability and reliability, these duplex steel flanges are ideal for demanding applications in marine, chemical, oil and gas, and industrial systems. For technical consultations, specialized requirements, or pricing information, contact Ladhani Metal Corporation today.

DIN 2634 stainless steel flanges PN 25 are precision-engineered weld neck flanges designed and manufactured in accordance with the DIN 2634 standard. These flanges are suitable for high-pressure pipeline systems operating up to 25 bar (362 psi), providing robust and secure connections for a variety of critical industrial applications. Constructed from high-quality stainless steel grades such as 304, 316, and 321, these flanges offer excellent mechanical properties, enhanced corrosion resistance, and dependable performance in aggressive service conditions. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of stainless steel flanges, known for delivering high-precision products that meet stringent international quality and dimensional standards. Each flange undergoes rigorous testing and quality checks to ensure optimal performance, safety, and longevity under high-pressure conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Engineered for high-pressure environments requiring reinforced flange connections with reliable resistance to corrosion and mechanical stress. Flange Type: • Weld Neck Flanges Incorporating a long tapered hub, weld neck flanges help maintain pipe alignment, reduce stress concentration at the weld joint, and enable smooth fluid flow with minimal turbulence. • Flat Face (FF) Flanges Ideal for systems utilizing soft gaskets or cast components, flat face flanges promote consistent gasket compression and sealing integrity. Stainless Steel Grades and Typical Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Suitable for general-purpose piping systems in environments with moderate corrosion exposure, including potable water and light-duty process lines. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Ideal for systems exposed to chlorides, cleaning agents, or other corrosive substances such as in chemical processing, pharmaceuticals, and marine environments. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Frequently used in high-temperature services such as thermal processing equipment, exhaust systems, and heat exchangers due to its stability against intergranular corrosion. Applications of DIN 2634 Stainless Steel Flanges PN 25: • Chemical Processing Units Handles higher operating pressures in systems transporting acids, alkalis, and solvents. • Marine and Offshore Installations Resistant to pressure fluctuations and saltwater corrosion in offshore piping networks. • Pharmaceutical and Biotech Plants Used in clean process environments where both pressure integrity and corrosion resistance are critical. • Industrial Steam and Thermal Systems Suitable for steam distribution and thermal expansion pipelines operating under high pressure. • Power Generation Facilities Applied in turbine piping, heat recovery systems, and pressurized cooling water circuits. Key Features: • Manufactured to DIN 2634 dimensional and pressure specifications • PN 25 pressure rating supports high-pressure operation • Weld neck design ensures leak-tight, stress-resistant connections • Available in stainless steel grades 304, 316, 321 and their low-carbon variants • Superior resistance to high-temperature corrosion and chemical attack • Long-term mechanical strength and fatigue resistance • Custom sizes, finishes, and pressure ratings available upon request Conclusion: DIN 2634 stainless steel flanges PN 25 from Ladhani Metal Corporation are engineered for high-performance use in high-pressure industrial environments where safety, corrosion resistance, and durability are paramount. These flanges are ideal for chemical, marine, thermal, and high-purity applications requiring strong, leak-resistant, and corrosion-resistant connections. For technical support, customized solutions, or pricing details, contact Ladhani Metal Corporation today.