Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 410 U Type Outer Half Round Tube Shield The SS 410 U Type Outer Half Round Tube Shield is made from SS 410, a hardenable martensitic stainless steel known for its excellent strength, toughness, and moderate corrosion resistance. This outer U-type configuration is designed to protect the external arc of U-bend tubes in heat exchangers, boilers, and reheaters where abrasive flue gases and mechanical wear are common. SS 410’s hardness and resistance to thermal fatigue make it suitable for shielding outer tube surfaces exposed to harsh industrial environments. • Outer U Type Half Round Tube Shield – Protects the outer curvature of U-bend tubes from erosion, scaling, and mechanical impact caused by high-velocity gas and slag deposits. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 410 U Type Outer Half Round Tube Shields, offering durable solutions for power generation and high-temperature applications. Chemical Composition of SS 410 – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Suitable for high-temperature environments with abrasive gas flow and mechanical stress, where moderate corrosion resistance is sufficient. Uses • Outer arc protection for U-bend tubes in boilers, superheaters, and reheaters in thermal power plants • Shields tube bends in economizers and waste heat recovery systems from flue gas erosion • Applied in return bends in gas processing heaters and exhaust systems subjected to particulate flow • Ideal for high-strength, mechanically demanding environments where wear resistance is critical • Used in utility boilers, process furnaces, and other industrial systems operating under moderate corrosion and high heat conditions Features • High mechanical strength – Martensitic structure provides excellent hardness and wear resistance for abrasive service conditions • Moderate corrosion resistance – Chromium content offers basic protection against oxidation and steam exposure • Outer bend coverage – Shields the most exposed and impact-prone arc of the U-bend tube • Precision fit – Custom-fabricated to match tube diameters and bend radii, ensuring tight, vibration-free installation • Easy to install – Mountable using stainless steel bands, clamps, or tack welds without dismantling the system • Cost-effective – Offers durable tube protection with high strength at a lower material cost compared to austenitic grades Applications • power generation – Protects outer curves of U-bend tubes in high-temperature zones of boilers and reheaters • petrochemical processing – Shields tube bends in process heaters and reformers from thermal and gas erosion • waste heat recovery – Applied in WHRBs and HRSGs to guard against slag impact and scale formation • industrial furnaces – Suitable for high-wear zones where heat and particulate flow cause surface degradation • general industry – Used in utility boilers and gas exhaust systems where mechanical protection is needed with moderate corrosion resistance Conclusion The SS 410 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a reliable and economical solution for protecting U-bend tube outer surfaces in boilers, heat exchangers, and thermal process systems. With excellent mechanical strength, good thermal stability, and moderate corrosion resistance, it is ideal for industrial applications that demand abrasion resistance and long service life in high-temperature environments. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

DIN 2545 Super Duplex flanges are specifically designed to offer outstanding strength and resistance to corrosion, especially in highly aggressive environments. Ladhani Metal Corporation supplies these high-performance flanges made from super duplex stainless steel, combining the advantages of both austenitic and ferritic structures to achieve superior mechanical properties and exceptional resistance to pitting, crevice corrosion, and stress corrosion cracking. With a pressure rating of PN 40, these flanges can withstand pressures up to 40 bar, ensuring reliable and safe performance in demanding applications such as offshore oil and gas, chemical processing, and marine industries. Types of DIN 2545 Super Duplex Flanges: Flat Face Flanges (FF) – These flanges have a flat sealing surface, suitable for low-pressure systems where uniform distribution of sealing force is needed. Raised Face Flanges (RF) – These flanges feature a raised area around the bolt holes, providing higher sealing pressure and better performance in higher-pressure environments. Ring-Type Joint (RTJ) Flanges – Designed with a groove to accommodate a metal sealing ring, these flanges are ideal for use in high-pressure and high-temperature systems. Grades and Chemical Composition: Super Duplex 2507 (UNS S32750) Chemical Composition: Chromium (Cr): 25% Nickel (Ni): 7% Molybdenum (Mo): 4% Nitrogen (N): 0.27% Iron (Fe): Balance This composition provides a remarkable combination of properties: Corrosion Resistance: Excellent protection against pitting, crevice corrosion, and stress corrosion cracking, even in environments containing chlorides or other aggressive chemicals. High Strength: The high molybdenum and nitrogen content enhance both the strength and corrosion resistance of the material, making it ideal for applications in highly corrosive, high-pressure environments. Ductility and Toughness: Despite its high strength, Super Duplex 2507 maintains good ductility, which is crucial Super Duplex 2507 is a high-alloy material known for its exceptional resistance to chloride stress corrosion cracking, pitting, and crevice corrosion. It is used in the most demanding applications, including offshore and subsea oil and gas, where high pressures and harsh environments are common. The enhanced molybdenum and nitrogen content provide superior mechanical strength and corrosion resistance. PN 40 Pressure Rating: The "PN" rating indicates the flange's pressure capacity. With PN 40, the flange is rated to handle pressures up to 40 bar, making it suitable for high-pressure applications where reliability and leak-free connections are essential. Applications: DIN 2545 Super Duplex flanges with PN 40 are widely used in industries that require superior performance under extreme conditions. Common applications include: Oil and Gas Industry: Offshore Platforms and Subsea Pipelines: Super duplex flanges are commonly used in offshore oil and gas platforms where exposure to seawater and harsh conditions requires materials with superior resistance to corrosion. Downhole Equipment: These flanges are ideal for equipment used in oil extraction, such as wellhead connections, blowout preventers, and pipeline systems under high pressure. Chemical and Petrochemical Industry: High-Pressure Reactors and Heat Exchangers: Super duplex flanges are essential in systems handling aggressive chemicals, such as acids, alkalis, and chloride-containing compounds, where both high strength and corrosion resistance are critical. Pipelines for Petrochemical Transport: Used in the transportation of petrochemicals and refined products, offering durability against corrosive chemicals and high temperatures. Marine and Offshore Applications: Seawater Cooling Systems: The excellent corrosion resistance of super duplex steel makes these flanges ideal for marine cooling systems, including seawater pumps and piping systems on ships and offshore platforms. Desalination Plants: Super duplex flanges are used in seawater desalination systems, where they help resist the corrosive effects of saltwater. Power Generation Industry: Nuclear and Fossil Fuel Plants: Super duplex flanges are employed in high-pressure steam lines, cooling systems, and heat exchangers where both strength and resistance to corrosion and erosion are necessary. Geothermal Energy Systems: Used in geothermal plants where high-temperature, aggressive fluids may cause corrosion, super duplex flanges ensure long-lasting performance. Conclusion: Ladhani Metal Corporation ensures that each Super Duplex flange meets stringent quality standards and is manufactured to exact specifications, ensuring durability and long-lasting performance in the most challenging environments. #din2545 #din2545flanges #din2545superduplexflanges #flanges

Ladhani Metal Corporation is a trusted supplier of high-quality DIN 2545 titanium flanges, designed for use in industries where strength, durability, and resistance to corrosion are essential. These titanium flanges are crafted to meet the highest standards of performance, offering reliability in a wide range of demanding applications such as chemical processing, marine environments, and aerospace industries. With a pressure rating of PN 40, these flanges are capable of withstanding pressures up to 40 bar, ensuring optimal performance even under high-pressure conditions. Types of DIN 2545 Titanium Flanges: Flat Face Flanges (FF) – These flanges have a flat surface that allows for even distribution of the sealing force, making them ideal for low-pressure applications where a tight seal is necessary. Raised Face Flanges (RF) – Featuring a raised area around the bolt holes, these flanges provide a higher sealing pressure, ensuring a more secure seal in higher-pressure environments. Ring-Type Joint (RTJ) Flanges – These flanges are equipped with a ring groove for use with a metal sealing ring, ideal for applications with high pressures or extreme temperatures. Grades of Titanium and Their Chemical Composition: Grade 2 (Commercially Pure Titanium) Chemical Composition: Ti: 99.2%, Fe: 0.3%, O: 0.18%, N: 0.03%, C: 0.08% Grade 2 titanium is the most commonly used form of titanium due to its excellent corrosion resistance, particularly in marine, chemical processing, and general industrial applications. It offers great strength-to-weight ratio and is known for its ability to withstand corrosive environments, including saltwater and various acidic conditions. Grade 5 (Titanium Alloy, Ti-6Al-4V) Chemical Composition: Ti: 90%, Al: 6%, V: 4%, Fe: 0.25%, O: 0.2%, C: 0.08% Grade 5 titanium, known as Ti-6Al-4V, is an alloy that combines high strength with excellent corrosion resistance. It is commonly used in aerospace, automotive, and high-performance engineering applications, offering a superior balance of strength, fatigue resistance, and durability. This grade is ideal for applications where structural integrity is critical. PN 40 Pressure Rating: The "PN" in DIN 2545 refers to the pressure rating, with PN 40 indicating that the flange is designed to withstand a maximum pressure of 40 bar. This pressure rating ensures that the flange is suitable for high-pressure systems, offering the necessary strength and reliability to maintain secure and leak-free connections. Applications: Chemical and petrochemical industries Marine and offshore platforms Aerospace and aviation systems Power generation and nuclear industries Food processing and pharmaceutical industries Ladhani Metal Corporation guarantees the production of these titanium flanges with precision and quality control, ensuring compliance with international standards. Each flange is manufactured to the exact specifications and undergoes rigorous testing to meet the required performance standards. Whether for a high-pressure industrial system or a specialized application, Ladhani Metal Corporation's DIN 2545 titanium flanges provide the performance and reliability needed for long-term operation.

Product Name: Titanium Plate Standard: ASTM B265 Material: Gr1 Unit Price: $15usd/kg-$48usd/kg Thickness: 0.5-100mm Length: 500-6000mm Or As You Require Width: 500-1000mm Or As You Require

Product Name: Titanium Stud Bolts Standard: DIN938 DIN939 Material: Gr2 Gr5 Size: M3-M52 Surface: Polished

Standard: DIN127 Material: Gr5 Size: M2-M52 Surface: Polished Gr5 Titanium Spring Lock Washer DIN127 Titanium spring lock washer is the most commonly used part to prevent assembly components from loosening. They apply greater bolt tension per unit of applied torque, and provide protection against loosening resulting from vibration and corrosion. Product Information of Gr5 Titanium Spring Lock Washer DIN127 Material: GR2 GR5 Standard: DIN127 Technique: CNC/Forged Surface: Polished Size: M2-M52 Titanium grade 5 is the commonly used titanium alloy that is accounting about 50% of usage throughout the globe. This material is covering 6% aluminum and 4% of vanadium. This material is a good combination of various properties like corrosion-resistant, lightweight, high strength. This alloy is stronger in addition to having thermal properties and stiffness. Among its advantages, this alloy is heat treatable. Also, this grade possesses good weldability and fabricability.

"LADHANI METAL CORPORATION is a professional Manufacturer of Stainless Steel Butt Weld , Socket Weld and Threaded Fittin.we have been producing A403/A403M-99a , A774/A774M-98, A182/182M , A182/A182M, A778 - A778-98 Stainless Steel Butt Weld 45 Degree Short Radius Elbow since 1988. We are Manufacturer of Stainless Steel Butt Weld 45 Degree Short Radius Elbow , Our products are manufactured using quality material and go through a rigorous quality check at all stages of production to ensure quality. LMC has an extensive history of Stainless Steel Butt Weld 45 Degree Short Radius Elbow Manufacturing in india, and Exporting and Trading.We are India Origin Factory of Stainless Steel Butt Weld 45 Degree Short Radius Elbow We at LMC has a wide selection at great prices to help you get creative. All the Stainless Steel Butt Weld 45 Degree Short Radius Elbow are quality guaranteed. If you have any question, please feel free to contact us. Dimension Spec : ANSI B16.9, B16.28 , MSS SP-43 , SP-79 We Export Quality Fittings to United Arab Emirates,Qatar,Kuwait,Bahrain,Oman,Saudi Arabia,Iran." Stainless Steel Butt Weld 45 Degree Short Radius Elbow Available In 1.4002, 1.4002, 1.4006, 1.4016, 1.4021, 1.4057, 1.4301, 1.4307, 1.431, 1.4311, 1.4313, 1.4318, 1.4362, 1.4371, 1.4401, 1.4404, 1.4429, 1.4438, 1.4462, 1.4509, 1.4512, 1.4541, 1.455, 1.4571, 1.4828, 1.4833, 1.4845, 201, 202, 301, 304, 309, 310, 316, 317, 321, 347, 405, 409, 410, 420, 430, 431, 436, 439, 2205, 2304, 00Cr17Ni14Mo2, 00Cr18Ti, 00Cr19Ni13Mo3, 08Ch18N10T, 08Ch18N12B, 0Cr13, 0Cr13Al, 0Cr17Ni12Mo2, 0Cr18Ni10Ti, 0Cr18Ni11Nb, 0Cr18Ni12Mo2Ti, 0Cr18Ni9, 0Cr25Ni20, 10Ch17N13M2T, 1Cr12, 1Cr17, 1Cr17Ni2, 1Cr17Ni7, 1Cr23Ni13, 201L, 201LN, 20Ch17N2, 20Ch23N18, 20Ch25N20S2, 301L, 301LN, 304H, 304L, 304LN, 309S, 310S, 316L, 316LN, 316Ti, 317L, 317LN, 410S, 436L, J-201, J-201L, J-201LN, J-202, J-204 Cu, J-2205, J-2304, J-301, J301L, J301LN, J-304, J-304H, J-304L, J-304LN, J-309, J-309S, J-310, J-310S, J-316, J-316L, J-316LN, J-316Ti, J-317, J31727, J-317L, J-317LN, J-31803, J-321, J-347, J-4, J-405, J-409, J-409M, J-409RC, J-410, J-410S, J-415, J-420, J-430, J-430Ti, J-431, J-436, J-436L, J-439, J-441, JBS, JSLAUS (J1), S20100, S20103, S20153, S20200, S20430, S30100, S30103, S30153, S30400, S30403, S30409, S30453, S30900, S30908, S31000, S31008, S31600, S31603, S31635, S31653, S31700, S31703, S31727, S31753, S31803, S32100, S32205, S32304, S34700, S40500, S40900, S41000, S41008, S41500, S42000, S43000, S43035, S43100, S43600, S43932, S43940, SUH310, SUH409, SUS201, SUS202, SUS301, SUS304, SUS304L, SUS304LN, SUS309S, SUS310S, SUS316, SUS316L, SUS316Ti, SUS317L, SUS321, SUS329J3L, SUS347, SUS403, SUS405, SUS410, SUS420JI, SUS430, SUS430LX, SUS436L, X02Cr17Ni12Mo2, X04Cr12, X04Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Nb, X04Cr18Ni10Ti, X04Cr19Ni9, X07Cr17, X10Cr17Mn6Ni4N20, X10Cr17Ni7, X10Cr18Mn9Ni5, X12Cr12, X12Cr13, X12CrMnNiN17-7-5, X12CrMnNiN18-9-5, X12CrNi17-7, X12CrNi25-21, X15Cr24Ni13, X15CrNiSi25-20, X17CrNi15-2, X20Cr13, X20Cr13, X20Cr25Ni20, X2CrMnNiN17-7-5, X2CrN N 23-4, X2CrNi18-9, X2CrNiMo17-13-2, X2CrNiMo18154, X2CrNiMoN 22-5-3, X2CrNiMoN17-11-2 SUS316LN, X2CrNiN18-10, X2CrNiN18-7, X2CrTi12, X2CrTiNb18, X3CrNiMo13-4, X3CrTi17, X3CrTi17, X5CrNi18-10, X5CrNiMo17-12-2, X6Cr-13, X6Cr17, X6CrAl13, X6CrNiMoTi17-12-2, X6CrNiNb18-10, X6CrNiTi18-10

LADHANI METAL CORPORATION We have carved niche in the industry by offering a qualitative range of Duplex 31803 Elbow. Before the delivery, these duplex 31803 elbows are checked by team of experts on various parameters. Our duplex 31803 elbows are designed to eliminate flow interruptions and ensure well balanced flow in order to reduce pressure losses. Apart from this, we provide our duplex 31803 elbows in different sizes and other specifications, in order to meet the needs of clients. Features: Light weight Unmatched quality Resistant to stress Specifications: Grades: ASME / ASTM SA / A 815 Material: Duplex 31803 Size: Available in all sizes and thickness,

ladhani metal corporation is supplier and exporter of CSN 17248 sheet , plate , coil , flat bar , circular plate , plate flanges , farma , laser cutting design sheet , waterjet cutting design sheet.CSN 17248 is the basic austenitic 18/8 steel stabilised by Titanium or additions. These grades are used because they are not sensitive to intergranular corrosion after heating within the carbide precipitation range of 425-850°C.CSN 17248 is the grade of choice for applications in the temperature range of up to about 900°C, combining high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion. Our Domestic reach is unlimited and we supply to this following cities Ahmedabad, Amritsar, Aurangabad, Bangalore, Bhopal, Chandigarh, Chennai, Coimbatore, Dhanbad, Faridabad, Ghaziabad, Guwahati, Gwalior, Howrah, Hyderabad, Indore, Jabalpur, Jaipur, Jodhpur, Kanpur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Meerut, Mumbai, Nagpur, Nashik, Navi Mumbai, New Delhi, Patna, Pune, Raipur, Rajkot, Ranchi, Solapur, Srinagar, Surat, Thane, Vadodara, Varanasi, Vijayawada, Visakhapatnam, Hubballi, Tiruchirappalli, Bareilly, Moradabad, Mysore, Gurgaon, Aligarh, Jalandhar, Bhubaneswar We export to following Countries: Russia, Canada, United States, China, Brazil, Australia, Argentina, Kazakhstan, Algeria, Denmark, Saudi Arabia, Mexico, Indonesia, Iran, Mongolia, Peru, South Africa, Colombia, Ethiopia, Bolivia, Egypt, Venezuela, Turkey, Chile, Myanmar, France, Ukraine, Madagascar, Botswana, Kenya, Thailand, Spain, Sweden, Uzbekistan, Morocco, Paraguay, Zimbabwe, Norway, Japan, Germany, Republic of the Congo, Finland, Vietnam, Malaysia, Poland, Oman, Italy, Philippines, Ecuador, New Zealand, United Kingdom, Guinea, Uganda, Nepal, Bangladesh