Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 410 U Type Outer Half Round Tube Shield The SS 410 U Type Outer Half Round Tube Shield is made from SS 410, a hardenable martensitic stainless steel known for its excellent strength, toughness, and moderate corrosion resistance. This outer U-type configuration is designed to protect the external arc of U-bend tubes in heat exchangers, boilers, and reheaters where abrasive flue gases and mechanical wear are common. SS 410’s hardness and resistance to thermal fatigue make it suitable for shielding outer tube surfaces exposed to harsh industrial environments. • Outer U Type Half Round Tube Shield – Protects the outer curvature of U-bend tubes from erosion, scaling, and mechanical impact caused by high-velocity gas and slag deposits. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 410 U Type Outer Half Round Tube Shields, offering durable solutions for power generation and high-temperature applications. Chemical Composition of SS 410 – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Suitable for high-temperature environments with abrasive gas flow and mechanical stress, where moderate corrosion resistance is sufficient. Uses • Outer arc protection for U-bend tubes in boilers, superheaters, and reheaters in thermal power plants • Shields tube bends in economizers and waste heat recovery systems from flue gas erosion • Applied in return bends in gas processing heaters and exhaust systems subjected to particulate flow • Ideal for high-strength, mechanically demanding environments where wear resistance is critical • Used in utility boilers, process furnaces, and other industrial systems operating under moderate corrosion and high heat conditions Features • High mechanical strength – Martensitic structure provides excellent hardness and wear resistance for abrasive service conditions • Moderate corrosion resistance – Chromium content offers basic protection against oxidation and steam exposure • Outer bend coverage – Shields the most exposed and impact-prone arc of the U-bend tube • Precision fit – Custom-fabricated to match tube diameters and bend radii, ensuring tight, vibration-free installation • Easy to install – Mountable using stainless steel bands, clamps, or tack welds without dismantling the system • Cost-effective – Offers durable tube protection with high strength at a lower material cost compared to austenitic grades Applications • power generation – Protects outer curves of U-bend tubes in high-temperature zones of boilers and reheaters • petrochemical processing – Shields tube bends in process heaters and reformers from thermal and gas erosion • waste heat recovery – Applied in WHRBs and HRSGs to guard against slag impact and scale formation • industrial furnaces – Suitable for high-wear zones where heat and particulate flow cause surface degradation • general industry – Used in utility boilers and gas exhaust systems where mechanical protection is needed with moderate corrosion resistance Conclusion The SS 410 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a reliable and economical solution for protecting U-bend tube outer surfaces in boilers, heat exchangers, and thermal process systems. With excellent mechanical strength, good thermal stability, and moderate corrosion resistance, it is ideal for industrial applications that demand abrasion resistance and long service life in high-temperature environments. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

DIN 2573 Monel Flanges PN 6 are premium-quality, low-pressure plate flanges crafted from Monel alloys, specifically engineered for systems that operate in highly corrosive and aggressive environments. Manufactured in accordance with DIN 2573 standards, these flanges offer excellent resistance to seawater, acids, and high-temperature conditions, making them an ideal choice for industries such as marine engineering, chemical processing, oil and gas, and power generation. The exceptional properties of Monel alloys ensure durability and reliability in applications requiring strong resistance to pitting, crevice corrosion, and stress corrosion cracking. Ladhani Metal Corporation is a trusted manufacturer and global supplier of Monel alloy flanges, delivering high-quality products that meet rigorous international standards. The DIN 2573 flange design ensures easy installation and provides a secure, leak-free connection, even in low-pressure, harsh environments. Pressure Rating: • PN 6 (6 bar / 87 psi): Designed for low-pressure applications in corrosive and high-temperature environments where Monel’s strength and resistance to corrosion are critical for long-term performance. Flange Types: • Plate Flanges Flat flanges ideal for bolted connections in piping systems where gasket sealing is required, providing secure, leak-free operation in low-pressure systems. • Flat Face (FF) Flanges Used with flat gaskets and mating surfaces, ensuring uniform contact and load distribution, particularly when joining with non-metallic components or cast iron systems. • Slip-On Flanges These flanges slip over the pipe, providing easy alignment and easy-to-weld connections, ideal for low-pressure applications with moderate pressure fluctuations. • Custom-Machined Flanges Tailored to meet specific dimensional and material requirements, available in various sizes, grades, and face finishes to suit the needs of custom applications. Monel Grades and Composition: Monel 400 (UNS N04400) Composition: • Nickel (Ni): 63.0 – 70.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): ≤ 2.5% • Manganese (Mn), Silicon (Si), Carbon (C): Trace amounts Applications: Monel 400 is widely used in marine environments, chemical processing, and heat exchangers, where it is subjected to both high temperatures and exposure to saltwater or acids. Its superior resistance to corrosion and oxidation makes it a preferred material in demanding applications like pumps, valves, and marine piping systems. Monel K-500 (UNS N05500) Composition: • Nickel (Ni): 63.0 – 70.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.2% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2.5% Applications: Monel K-500 offers higher strength and hardness compared to Monel 400, making it suitable for applications in oil and gas extraction, marine industries, and aerospace systems, where both corrosion resistance and high mechanical properties are required. Applications of DIN 2573 Monel Flanges: • Chemical and Petrochemical Plants: Monel flanges are ideal for use in chemical reactors, exchangers, and pipelines handling aggressive chemicals like sulfuric acid, hydrochloric acid, and caustics. • Marine and Offshore Engineering: Highly resistant to seawater corrosion, Monel flanges are used extensively in marine piping systems, offshore oil rigs, and shipbuilding applications where exposure to saltwater and harsh weather conditions is frequent. • Oil and Gas Industry: Monel flanges are often used in production platforms, refineries, and pipelines exposed to brine and acidic substances, offering both strength and resistance to corrosion under high-stress conditions. • Power Generation: Used in systems handling high-temperature steam and corrosive environments, Monel flanges provide reliable service for high-performance power plant components. • Desalination and Water Treatment: With their corrosion resistance to saline environments, Monel flanges are also ideal for seawater desalination plants and water treatment facilities. Key Features: • Manufactured according to DIN 2573 standards • Rated for PN 6 low-pressure systems, with exceptional resistance to corrosion • Outstanding performance in highly corrosive, high-temperature environments • Available in Monel 400, Monel K-500, and other Monel alloys • High strength-to-weight ratio for reliable long-term performance • Suitable for marine, offshore, chemical, and power generation applications • Available with custom drilling, surface finishes, and flange faces Conclusion: DIN 2573 Monel Flanges PN 6 from Ladhani Metal Corporation provide unmatched durability, corrosion resistance, and performance in low-pressure applications exposed to challenging chemical, thermal, and environmental conditions. For custom dimensions, material selections, or technical support, contact Ladhani Metal Corporation today.

DIN 2569 Monel Flanges PN 100 are precision-engineered welding neck flanges manufactured from high-grade Monel alloys, specifically designed for high-pressure and highly corrosive environments. Built to DIN 2569 standards, these flanges offer excellent resistance to seawater, acids, and alkalis, along with superior mechanical strength and durability. Their robust performance makes them ideal for critical applications in marine engineering, chemical processing, oil and gas, and offshore industries. Ladhani Metal Corporation is a leading manufacturer and exporter of Monel flanges, offering reliable and high-quality products that meet stringent international standards. The welding neck configuration ensures permanent, high-strength connections suitable for continuous operation under high pressure and temperature conditions. Pressure Rating: • PN 100 (100 bar / 1450 psi): Specifically designed for high-pressure systems requiring outstanding corrosion resistance, sealing integrity, and mechanical performance in aggressive and demanding environments. Flange Types: • Welding Neck Flanges Provide high-strength welded connections for pressurized piping systems exposed to thermal expansion and vibration. • Raised Face (RF) Flanges Enhance gasket compression and sealing performance in high-pressure and temperature applications. • Flat Face (FF) Flanges Used in applications with flat mating surfaces, particularly when connecting to brittle or non-metallic materials. • Forged Welding Neck Flanges Offer high mechanical strength, dimensional accuracy, and durability. • Custom-Machined Flanges Available in various sizes, pressure classes, and Monel grades as per customer requirements. Monel Grades and Composition: 1. Monel 400 (Nickel-Copper Alloy) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): ≤ 2.5% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.30% Applications: Used in marine engineering, chemical processing, and fuel or freshwater tanks due to its excellent resistance to seawater, hydrofluoric acid, and stress corrosion cracking. 2. Monel K500 (Precipitation-Hardened Alloy) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% Applications: Ideal for applications requiring high strength and corrosion resistance, such as pump shafts, oil well tools, and marine components. K500 offers greater mechanical strength and hardness compared to Monel 400. Applications of DIN 2569 Monel Flanges: • Marine and Offshore Engineering: Perfect for underwater, saltwater, and coastal applications due to excellent seawater and corrosion resistance. • Chemical and Petrochemical Industries: Used in acid and alkali handling systems, heat exchangers, and reactors where corrosion resistance is crucial. • Oil and Gas Sector: Employed in valves, pipes, and flanges exposed to sour gas and offshore drilling conditions. • Power Generation: Suitable for condenser tubing and heat exchangers in environments where both corrosion and high temperature are factors. • Aerospace and Defense: Used in high-performance components requiring durability, resistance to aggressive chemicals, and thermal stability. Key Features: • Manufactured to DIN 2569 standard • Available in PN 100 pressure rating • Excellent corrosion resistance in acidic and marine environments • High mechanical strength and thermal stability • Permanent welded neck design for secure pipe integration • Supplied with test certifications and complete traceability • Custom machining and finishing available including pickling and passivation Conclusion: DIN 2569 Monel Flanges PN 100 from Ladhani Metal Corporation are engineered for critical operations that demand corrosion resistance, strength, and durability under pressure. These flanges are trusted in marine, chemical, and energy sectors, delivering dependable service in the most challenging environments. For tailored specifications, material consultations, or bulk orders, reach out to Ladhani Metal Corporation today.

DIN 2545 Monel flanges, provided by Ladhani Metal Corporation, are designed to offer exceptional strength and outstanding resistance to corrosion, particularly in harsh environments. Monel alloys, primarily composed of nickel and copper, are known for their ability to withstand the corrosive effects of seawater, acids, and alkalis. These flanges are ideal for high-performance applications in industries such as marine, chemical processing, and oil and gas. With a pressure rating of PN 40, these flanges are capable of handling pressures up to 40 bar, ensuring reliable, leak-free connections in high-pressure systems. Types of DIN 2545 Monel Flanges: Flat Face Flanges (FF) – These flanges have a flat sealing surface that provides uniform distribution of sealing pressure, making them suitable for low-pressure systems or where precise sealing is required. Raised Face Flanges (RF) – Raised face flanges feature a raised area around the bolt holes to provide higher sealing pressure, ideal for high-pressure environments. Ring-Type Joint (RTJ) Flanges – These flanges are designed with a groove to accommodate a metal sealing ring, suitable for applications that require resistance to high pressure and high temperatures. Grades and Chemical Composition: Monel 400 (UNS N04400) Chemical Composition: Ni: 63%, Cu: 28-34%, Fe: 2.5%, Mn: 2%, C: 0.3%, Si: 0.5% Monel 400 is a nickel-copper alloy known for its excellent resistance to corrosion, particularly in seawater and chemical environments. It offers good mechanical properties at both subzero and elevated temperatures. This alloy is commonly used in marine applications, chemical processing, and heat exchangers. Monel K500 (UNS N05500) Chemical Composition: Ni: 63%, Cu: 27%, Al: 2.3-3.15%, Ti: 0.35-0.85%, Fe: 2.5%, C: 0.3%, Mn: 1.5% Monel K500 is an age-hardenable nickel-copper alloy that provides additional strength and hardness compared to Monel 400. It offers outstanding corrosion resistance, particularly in seawater and high-stress environments, making it suitable for use in marine, oil and gas, and aerospace applications. PN 40 Pressure Rating: The "PN" rating refers to the flange's pressure capacity. PN 40 indicates that the flange is rated for pressures up to 40 bar, making it ideal for high-pressure systems where secure and durable connections are essential. Applications: 1. Marine and Offshore Applications: Seawater Systems: Monel is highly resistant to seawater corrosion, making it ideal for use in marine applications, such as seawater cooling systems, pumps, valves, and heat exchangers on ships and offshore platforms. Offshore Pipelines and Risers: Monel flanges are commonly used in subsea pipelines and risers due to their resistance to corrosion from saltwater and high-pressure conditions found in offshore oil and gas operations. 2. Chemical Processing Industry: Acidic Environments: Monel flanges offer superior resistance to various acidic solutions, making them ideal for use in chemical processing plants, especially where sulfuric acid, hydrochloric acid, and other corrosive chemicals are present. Piping Systems: Used in pipelines and reactors that transport corrosive chemicals, Monel flanges ensure long-term reliability and strength in harsh environments. 3. Oil and Gas Industry: Petrochemical Refineries: Monel flanges are used in refining operations, including in heat exchangers, pumps, and piping systems that handle hydrocarbon fluids, ensuring resistance to both pressure and corrosion. Subsea Equipment: Monel is also used in subsea exploration and production equipment due to its ability to withstand harsh marine environments and high-pressure systems. Conclusion : Ladhani Metal Corporation ensures that all Monel flanges meet stringent quality standards and are manufactured to exact specifications, ensuring durability and reliability in even the most challenging environments. Each flange undergoes comprehensive testing to guarantee long-lasting performance and safe operation in high-pressure applications. #din2545 #din2545flanges #din2545monelflanges #flanges #flangessupplierinmumbai

Porduct name : Titanium Forged Clad Tube Sheet Material: Titanium +steel,Titanium+stainless steel etc. Size &Standard: As per client drawing Production Method: Forging,annealing and machining Advantage: Excellent corrosion resistance ability Packing: Plywood case Application: Heat Exchanger, chemical equipment, Pressure Vessel, filter devices, etc Titanium Forged Clad Tube Sheet Titanium is a new kind of metal, with low density, corrosion resistance, high and low temperature. High strength and other excellent performance. It is an important structural material in aviation, aerospace, chemical, Marine, electric power, metallurgy and other fields. In order to save titanium resources, reduce the cost and promote the application of this new metal material in civil industry, titanium steel composite plate came into being. Titanium steel composite tube plate have the same effect as pure titanium tube plate, but also very good cost saving, widely used in pressure vessels, heat exchangers, urban sewage treatment containers, water storage containers and nuclear waste treatment containers, chemical distillation tanks and so on.

Product Name: Titanium Pipe Standard: ASTM B338 Material: Gr1, Gr2 Unit Price: $25usd/kg-$40usd/kg Type: Welded/Seamless Shape: Round Outer Diameter: 9.52mm/12.7mm/15.9mm/19mm/21.7mm/25.4mm/32mm/33.4mm/38mm/45mm etc. Wall Thickness: 0.5-3.0mm Length: Max 12000mm Surface: Bright Product Information Titanium welded pipe is formed by rolling a cold-rolled titanium strip into a tube shape and then using tungsten inert gas shielded welding to weld the gap. Due to its excellent seawater corrosion resistance, it has become the first choice for various types of condensers and heat exchangers to replace stainless steel and copper tubes as heat exchange tubes since it was developed. Therefore, it has been widely used in the manufacture of coastal power plants, nuclear power plants, Condensers and heat exchangers that require sea water as a cooling medium in seawater desalination and petrochemical industries.

Porduct name : Titanium Steel Composite Tube plate Material: Titanium +steel,Titanium+stainless steel etc. Size &Standard: As per client drawing Production Method: Forging,annealing and machining Advantage: Excellent corrosion resistance ability Packing: Plywood case Application: Heat Exchanger, chemical equipment, Pressure Vessel, filter devices, etc. Titanium steel composite tube plate Name Clad Metal Base Metal Specification Standard Application Titanium-Steel Cladding plate TA1, TA2, TA9, TA10 Q235, Q245R Q345R Coating metal thickness: 0.5~50mm Base material thickness: 0.5~500mm ASME, ASTM petrochemical, vacuum salt making, Chlor-alkali, food, fertilizer, hydrometallurgy, electroplate and etc. Main applications: Titanium clad steel plate tube sheet is mainly used in two aspects: heat exchanger tube sheet and processing container plate. The total thickness of the tube sheet is 75-100mm and the thickness of the coating is 12-15mm. The total thickness of the processing vessel plate is 19-25mm and the coating thickness is 2-3mm. Titanium-steel clad plate has a good application prospect in the manufacture of heat exchanger tube sheet, large diameter (1800 mm) seamless head and reactor. Titanium clad steel plate tube sheet is used more in the reactor and terephthalic acid plant equipment, as well as ethylene glycol, maleic acid and rust remover production equipment. Some reservoirs have operating temperatures up to 200℃, internal pressure of 9 MPa, equipment diameters of 700 mm, length of 1080 mm, and composite plate thickness of (2 + 15) mm.For petrochemical equipment operating at ordinary high pressures and temperatures, the lining must provide good heat conduction and must withstand heat cycles, pressure differences and other pressures. Therefore, loose lining or spot welding additional lining is not satisfactory, but the titanium-steel clad plate can meet the above requirements. Titanium clad steel plates tube sheets are used not only in pressure vessels, heat exchangers and tubesheets, but also in the following applications: A. containers for municipal sewage treatment, which contain larger chloride. B. chemical distillation tanks for high temperature applications. C. water storage containers and containers for nuclear waste disposal

LADHANI METAL CORPORATION To meet diversified needs of our esteemed clients all over the world, we are offering a vast range of Duplex Bright Bar. This steel round bar is manufactured according to the market standards by utilizing high quality material & modern techniques. Our steel round bar is well tested on several parameters so as to dispatch a defect free range. The offered steel round bar is made accessible in various specifications to meet the requirements of our customers. Features: Dimensional accuracy Elegant design Corrosion resistance Specifications: Range: 5 mm Dia to 500 mm Dia Grade: 202, 202Q, 304, 304L, 302, 303, 310, 316, 316L, 409, 309, 420, 440 Duplex & Super Duplex Application: Machined components pump shafts, valves, fasteners, machine tools, dairy equipments, surgical & medical parts, threaded bars, studs, bolts, pins, hinges and handles.

Ladhani Metal Corporation offers SS 420 Half Round Tube Shields designed to protect reheater (R/H) tubes in boilers, power plants, and industrial steam systems. Reheater tubes carry steam through the reheater section of the boiler, where the steam is reheated after partial expansion in the high-pressure turbine to improve efficiency and reduce moisture formation. Manufactured from martensitic stainless steel grade SS 420, these shields provide excellent hardness, wear resistance, and moderate corrosion resistance, making them suitable for harsh high-temperature boiler conditions. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in high-velocity and ash-laden zones Ladhani Metal Corporation manufactures, supplies, and exports SS 420 Half Round Tube Shields in a wide range of diameters, lengths, and thicknesses to meet the requirements of both domestic and international industries. SS 420 Grade Chemical Composition – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.40% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.00 – 14.00% • Iron (Fe): Balance Applications: Well-suited for reheater sections in thermal power plants, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs) where high hardness and wear resistance are required along with resistance to scaling and oxidation. Uses • Protects reheater tubes from erosion, scaling, and soot blower damage • Shields R/H tubes in abrasive flue gas zones • Extends operational life of high-temperature steam system components • Applicable in power boilers, HRSGs, WHRBs, and petrochemical process heaters Features • High hardness and superior wear resistance • Good scaling and oxidation resistance at elevated temperatures • Strong mechanical strength under thermal stress • Precision-engineered design for secure tube coverage Applications • Power generation boilers – Protection for R/H tubes in high-temperature zones • Waste heat recovery systems – Guards against particle erosion and scaling • Industrial steam boilers – Performs well under severe flue gas exposure • Petrochemical and process plants – Suitable for harsh reheating environments Conclusion The SS 420 Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation provides reliable, durable protection against erosion, scaling, and high-temperature wear. Combining excellent hardness with moderate corrosion resistance, these shields enhance boiler efficiency, extend tube service life, and minimize downtime. Available in export-ready specifications and customized sizes to meet global industry demands. For technical support and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection