Ladhani Metal Corporation offers SS 430 Half Round Tube Shields specially designed to protect reheater (R/H) tubes in boilers, power plants, and industrial steam systems. Reheater tubes carry steam through the reheater section of the boiler, where it is reheated after partial expansion in the high-pressure turbine to improve efficiency and minimize moisture. Manufactured from ferritic stainless steel grade SS 430, these shields provide excellent resistance to oxidation, scaling, and moderate corrosion while offering good thermal conductivity and formability for long-term service in demanding boiler environments. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in high-velocity and ash-laden zones Ladhani Metal Corporation manufactures, supplies, and exports SS 430 Half Round Tube Shields in different lengths, diameters, and thicknesses, ensuring suitability for a wide range of domestic and international boiler applications. SS 430 Grade Chemical Composition – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.00 – 18.00% • Nickel (Ni): ≤ 0.50% • Iron (Fe): Balance Applications: Commonly used in reheater sections of thermal power plants, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs) where scaling resistance and cost-effective protection are required. Uses • Shields reheater tubes against erosion, scaling, and oxidation • Protects R/H tubes in zones exposed to high flue gas velocity and ash particles • Extends tube service life under thermal cycling and corrosive atmospheres • Applicable in utility boilers, WHRBs, HRSGs, and process steam plants Features • Excellent resistance to oxidation and scaling at elevated temperatures • Cost-effective protection with good mechanical strength • Superior thermal conductivity for stable heat transfer • Custom-fit design for precise installation and maximum coverage Applications • Power generation boilers – Reheater tube protection in oxidizing atmospheres • Waste heat recovery systems – Reliable shield against particle erosion • Industrial boilers – Durable under varying flue gas conditions • Petrochemical and process plants – Efficient in moderate corrosive service environments Conclusion The SS 430 Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation offers dependable, cost-effective protection against scaling, oxidation, and erosion in high-temperature boiler conditions. With good mechanical strength and precision fit, these shields reduce maintenance needs and extend tube service life. Available in customized, export-ready specifications to meet global industry requirements. For supply and technical assistance, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation offers SS 430 Boiler Half Round Tube Shields designed to protect straight boiler and heat exchanger tubes from erosion, oxidation, and high-temperature wear. Manufactured from ferritic stainless steel grade SS 430, these shields provide good corrosion resistance, excellent formability, and reliable thermal stability in moderately aggressive service environments. The shields are precision-formed into a half-round profile to match the curvature of standard boiler tubes, ensuring a secure fit and effective coverage. This design provides a physical barrier against soot blower impact, abrasive flue gas, and particulate erosion, extending the operational life of tubes and reducing maintenance costs. Ladhani Metal Corporation manufactures, supplies, and exports SS 430 Boiler Half Round Tube Shields in a wide range of lengths, diameters, and thicknesses, catering to both domestic and international markets. SS 430 Grade Chemical Composition – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for power plants, WHRBs, HRSGs, and industrial boiler systems requiring protection in dry heat and oxidizing environments. Uses • Shields straight tubes in utility boilers and superheaters • Protects against flue gas erosion and surface scaling • Applied in WHRBs and HRSGs operating with clean or mildly corrosive gases • Suitable for industrial furnaces and heat recovery systems Features • Cost-effective protection – Combines durability with economic material choice • Oxidation resistance – Performs well in clean flue gas and dry heat conditions • Thermal reliability – Withstands repeated heating cycles without deformation • Precision fit – Formed to match tube diameter for secure installation • Flexible mounting – Can be clamped, banded, or tack welded • Export quality – Manufactured to meet international standards Applications • Thermal power stations – Guards steam and boiler tubes from scaling • Waste heat recovery boilers – Shields tubes in clean gas environments • Process heaters – Effective in less corrosive gas heating systems • Food and cement industries – Protects tubes from oxidation and moderate wear Conclusion The SS 430 Boiler Half Round Tube Shield from Ladhani Metal Corporation delivers cost-efficient and reliable protection for boiler tubes in dry heat and oxidizing service conditions. With good formability, corrosion resistance, and thermal performance, these shields are a practical solution for extending tube life and reducing operational downtime. Available in custom dimensions and export-ready specifications, they serve a wide range of industrial boiler applications worldwide. For detailed sizing, technical support, or export inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield

Ladhani Metal Corporation offers SS 430 Outer Half Round 90 Degree Bend Tube Shields designed to protect the outer arc of U-bend and 90-degree curved tubes in boilers, heat exchangers, superheaters, and reheaters. Manufactured from ferritic stainless steel grade SS 430, these shields provide good corrosion resistance, excellent formability, and thermal stability in moderately aggressive service environments. SS 430 is particularly suitable for applications where resistance to oxidation and surface scaling is needed without exposure to highly corrosive agents. The semi-cylindrical profile is precision-formed to match the outer curvature of return tube bends, offering a physical barrier against soot-blower impact, flue gas erosion, and ash particle wear. SS 430 shields are commonly used in utility and industrial boilers operating under dry, mildly corrosive, and thermally demanding conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 430 Outer Half Round 90 Degree Bend Tube Shields, offering custom configurations to suit specific plant layouts and service requirements. SS 430 Grade Chemical Composition – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for power plants, WHRBs, HRSGs, and general industrial systems requiring protection for tube bends in dry heat and oxidizing environments. Uses • Shielding outer 90-degree bends in superheaters and reheaters • Applied in WHRBs and HRSG return coils exposed to dry flue gas • Protects against moderate erosion and oxidation in utility boilers • Suitable for curved tubes in industrial furnaces and heat recovery units Features • Cost-effective protection – Combines durability with economical material choice • Oxidation resistance – Performs well in clean flue gas and dry heat exposure • Thermal reliability – Withstands repeated heating cycles without deformation • Custom-fit geometry – Formed to match exact bend radius for tight coverage • Versatile installation – Can be clamped, banded, or tack welded as needed • Multiple sizes – Offered in a variety of thicknesses, lengths, and radii Applications • Thermal power stations – Shields steam lines and return bends from surface scaling • Waste heat boilers – Guards tube bends in clean gas recovery systems • Process heaters – Used in less corrosive gas heating environments • Cement and food processing industries – Protects tube curves from oxidation Conclusion The SS 430 Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation provides durable and cost-efficient protection for tube bends exposed to dry heat, oxidation, and moderate wear. With good formability and thermal performance, these shields are ideal for systems where corrosion levels are controlled but mechanical shielding is essential. For custom sizing, material selection, or technical specifications, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to protect boiler tubes, heat exchanger coils, and superheaters from flue gas erosion, fly ash impact, scaling, and corrosion. These shields are widely used in power plants, industrial boilers, and waste heat recovery units to reduce tube wear, extend service life, and improve operational efficiency. Their half-round, semi-cylindrical design ensures easy installation and a secure fit over curved or straight tubes exposed to abrasive gas flow and thermal cycling. SS 430 Half Round Tube Shield for LTSH Tube The SS 430 Half Round Tube Shield is made from ferritic stainless steel grade 430, which provides good oxidation resistance, moderate corrosion protection, and excellent thermal stability. It is particularly suitable for Low Temperature Superheater (LTSH) applications where boiler tubes operate in moderately corrosive environments and are subject to ash deposition and dry gas erosion. With its high chromium content and low carbon levels, SS 430 offers a cost-effective shielding solution for boiler systems requiring dependable surface protection without the need for high nickel alloys. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 430 Half Round Tube Shields for LTSH applications, providing durable and economical protection in moderately corrosive and thermally demanding environments. Chemical Composition of SS 430 – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Iron (Fe): Balance Applications: Best suited for low-temperature superheater zones and convection areas where oxidation, thermal exposure, and ash erosion are concerns in boiler and steam systems. Uses • Installed on LTSH tubes to prevent scaling, ash abrasion, and flue gas corrosion • Shields tube surfaces in HRSGs, economizers, and convection zones of WHRBs • Used in industrial and utility boilers operating in dry, oxidizing flue gas environments • Suitable for coal, biomass, or oil-fired systems with moderate corrosion potential • Applied where cost-effective surface protection is required without compromising durability Features • Good oxidation resistance – Maintains integrity under sustained thermal exposure • Cost-effective – Offers a lower-cost alternative to austenitic and molybdenum-bearing steels • Custom-fit design – Precision-fabricated to match tube radius, bend geometry, and length • Easy installation – Can be installed using clamp-on, weld-on, or banding techniques • Reduces tube wear – Protects surfaces from erosion, scaling, and soot buildup • Available in multiple dimensions and thicknesses to match application specifications Applications • thermal power plants – Installed on LTSH tube banks for long-term surface protection • waste heat recovery units – Protects return bends and convection tubes from particulate erosion • steam generation systems – Applied to shield tubes in low-temperature flue zones • industrial boilers – Guards against ash impact in biomass or coal-fired heating systems • process boilers – Enhances durability of heat exchange surfaces in oxidizing environments Conclusion The SS 430 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers reliable and cost-efficient protection for superheater and boiler tubes in low-temperature, oxidizing environments. Its thermal stability and erosion resistance make it ideal for power and industrial systems where long-term durability and low maintenance are essential. For detailed specifications, sizing options, or technical consultation, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to provide robust protection for boiler, superheater, and heat exchanger tubes against high-temperature erosion, slag deposition, scaling, and corrosive gas exposure. These shields are essential in power plants, petrochemical systems, and high-heat industrial environments where tubes are vulnerable to rapid degradation due to thermal cycling and particulate flow. The half-round design ensures quick installation over curved or straight tube sections without system disassembly. U Type Inner Half Round Tube Shield The U Type Inner Half Round Tube Shield is specially designed to protect the inner curvature of U-bend tubes, which often experiences high levels of turbulence, localized corrosion, and scaling due to gas redirection and mechanical stress. Inner shields are commonly paired with outer shields for full bend protection and are manufactured in a wide range of stainless steel and high-temperature alloy grades, customized to specific environmental and system requirements. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of U Type Inner Half Round Tube Shields in various material grades, offering tailored protection solutions for high-temperature and corrosive conditions across multiple industries. Available Grades • SS 304 – General-use stainless steel with good corrosion and heat resistance • SS 304L – Low-carbon version for improved weldability and reduced carbide precipitation • SS 316 – Molybdenum-added alloy with excellent resistance to pitting and chlorides • SS 316L – Low-carbon alternative for superior corrosion resistance in welded environments • SS 310 – Austenitic high-temperature steel with excellent oxidation resistance • SS 310S – Low-carbon SS 310 for better thermal fatigue performance • SS 410 – Martensitic stainless steel with good strength and abrasion resistance • SS 420 – High-hardness martensitic grade ideal for erosion-prone zones • SS 430 – Ferritic grade for moderate corrosion and oxidation resistance • 1Cr13 – Martensitic stainless steel offering mechanical protection and heat resistance • 1Cr18Ni9Ti – Titanium-stabilized grade offering resistance to intergranular corrosion • Cr23Ni13 – High-temperature alloy with excellent oxidation and scaling resistance • Cr25Ni20 – High-performance grade for extreme thermal and oxidizing conditions • 1Cr25Ni20Si2 – Heat-resistant alloy with silicon for improved scale resistance • 1Cr20Ni14Si2 – Alloy for thermal fatigue protection and oxidizing environments Applications • Inner arc protection in U-bend tubes of boilers, superheaters, and reheaters • Shielding internal curves of tubes in waste heat recovery boilers (WHRBs) and HRSGs • Corrosion and scale defense for inner tube arcs in petrochemical and steam reforming units • Inner surface protection in furnace coils, reformers, and incinerators • Installed in chemical plants and thermal systems prone to turbulent flue gas exposure Features • Focused inner arc protection – Guards the most corrosion- and scale-prone surface of U-bend tubes • Material flexibility – Available in multiple grades for varied thermal, mechanical, and chemical requirements • Excellent thermal resistance – Withstands extreme temperatures depending on material (up to 1150°C+) • Precise fit – Custom-fabricated to match exact tube dimensions and bend radii • Simple installation – Mounted using clamps, stainless bands, or welding techniques • Dual-shield pairing – Can be combined with outer shields for complete U-bend coverage • Long-lasting performance – Enhances tube reliability and reduces maintenance in high-wear zones Applications • power generation – Protects U-bend inner surfaces in superheaters and economizers from flue gas turbulence • petrochemical plants – Shields inside arcs in reformers and heaters exposed to chlorides and acidic gases • waste heat systems – Installed in HRSGs and WHRBs to prevent slag and oxidation on internal bends • chemical industries – Suitable for reactors and high-temperature exchangers handling corrosive media • cement and metallurgy – Used in systems exposed to flame, dust, and oxidizing atmospheres Conclusion The U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a precision-engineered solution for protecting the inner arc of U-bend tubes against corrosion, scale formation, and thermal damage. Available in a wide range of stainless steels and high-temperature alloys, these shields provide durable, customizable, and easy-to-install protection for critical components in power, chemical, and thermal processing systems. For custom sizes, technical assistance, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect heat exchanger and boiler tubes from erosion, scaling, slag buildup, and high-temperature oxidation. These shields are commonly applied in thermal and industrial systems where tubes are exposed to flue gases, particulate flow, and repeated thermal cycling. The half-round design ensures secure and efficient coverage over straight or curved tube sections, reducing maintenance needs and enhancing tube lifespan. SS 430 U Type Outer Half Round Tube Shield The SS 430 U Type Outer Half Round Tube Shield is fabricated from SS 430, a ferritic stainless steel known for its good corrosion resistance, oxidation resistance, and excellent formability. This outer U-type shield is specifically designed to protect the outer arc of U-bend tubes in boilers, heat exchangers, and recovery systems. SS 430 is highly resistant to stress corrosion cracking and scaling in mildly corrosive and high-temperature environments, making it a cost-effective solution for less aggressive service conditions. • Outer U Type Half Round Tube Shield – Shields the outer curvature of U-bend tubes against heat, slag, soot erosion, and surface oxidation from flue gases. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SS 430 U Type Outer Half Round Tube Shields, offering dependable protection for boiler and exchanger tube bends in moderate-temperature industrial environments. Chemical Composition of SS 430 – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for moderate-temperature, mildly corrosive environments where oxidation resistance and mechanical durability are required. Uses • Outer bend protection of U-tubes in reheaters and superheaters in thermal power generation systems • Shielding of external arcs in waste heat recovery units and heat exchangers exposed to dry or clean flue gases • Coverage of U-bend tubes in utility boilers and economizers with low chloride or sulfuric gas exposure • Suitable for food processing and clean air systems requiring stable performance under elevated temperatures • Used in systems where stress corrosion cracking resistance and cost-effective shielding are priorities Features • Good corrosion and oxidation resistance – Chromium-rich alloy resists surface oxidation and rust formation at elevated temperatures • Outer arc coverage – Provides mechanical and thermal shielding for the most exposed curve of U-bend tubes • Thermal stability – Performs reliably in temperatures up to 815°C with good resistance to scaling and heat stress • Easy installation – Can be mounted using clamps, banding, or tack welding without requiring disassembly of the system • Precision fit – Custom-fabricated to fit specific tube diameters and radii, ensuring secure, movement-free installation • Economical solution – Offers dependable performance at a lower cost compared to austenitic stainless steels Applications • thermal and captive power plants – Installed on U-bend outer arcs in superheaters and economizers exposed to moderate flue gases • heat recovery systems – Shields bends in WHRB and HRSG systems operating under low-corrosive and oxidizing conditions • general industrial boilers – Protects tube surfaces from surface scaling and minor gas abrasion • process industries – Suitable for clean air and low-chloride gas systems in the food, paper, or light chemical sectors • HVAC and ventilation systems – Used in exhaust and heating systems requiring corrosion-resistant but cost-effective shielding Conclusion The SS 430 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a cost-effective and reliable protective component for U-bend tube outer surfaces in industrial systems. With good oxidation resistance, structural integrity under moderate heat, and easy installation, it is ideal for power plants, recovery systems, and clean process industries where durable but economical shielding is required. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components designed to protect the outer surfaces of boiler tubes, heat exchangers, and industrial piping systems from erosion, scale formation, and thermal fatigue. These shields play a crucial role in minimizing tube failure and improving overall equipment reliability in high-temperature and particulate-laden environments. SS 430 Half Round Tube Shield The SS 430 Half Round Tube Shield is a semi-cylindrical cladding made from ferritic stainless steel grade 430. With good corrosion resistance, excellent oxidation resistance, and superior thermal conductivity, SS 430 is well suited for non-pressurized or moderately corrosive environments. It is particularly effective in flue gas paths and air preheaters where thermal stress and ash erosion can degrade exposed tubes. The half-round geometry ensures easy, secure installation and a consistent protective barrier around the tube's surface, enhancing durability without interfering with system function. Chemical Composition of SS 430 – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Uses • Boiler Tube Surface Protection – Shields tubes in low to moderate temperature zones from flue gas corrosion, ash abrasion, and thermal scaling. • Air Preheater Tubing – Guards against dust erosion in regenerative air preheaters and gas-to-air heat transfer zones. • Economizer Tube Protection – Used in downstream sections of boilers where lower temperatures allow for effective use of ferritic steels. • Steam Line Shields – Protects low-pressure steam tubing and condensate lines in systems not requiring austenitic stainless steel grades. • Heat Exchanger Outer Shells – Provides an extra layer of protection in air-cooled or shell-side applications exposed to mechanical wear. Features • Good Oxidation Resistance – Performs reliably in oxidizing conditions up to 815°C, ideal for flue gas exposure and dry ash environments. • Ferritic Structure – Offers better thermal conductivity and resistance to thermal expansion than austenitic grades, reducing distortion risk. • Corrosion Resistance – Resists corrosion from atmospheric moisture, flue gas condensates, and other mildly aggressive compounds. • Cost-Effective – Offers an economical alternative to higher alloy stainless steels in appropriate thermal zones. • Precision Fit – Half-round design enables quick installation and conforms closely to tube diameters for optimal protection. • Surface Finish Options – Supplied in bright annealed, pickled, or passivated finishes based on operational requirements. • Custom Fabrication – Available in a range of wall thicknesses, diameters, and lengths to meet plant-specific installation demands. Applications • Thermal Power Stations – Shields economizer and air preheater tubes from dust-laden exhaust gas erosion and moderate thermal stress. • Cement and Lime Kilns – Used to protect heat recovery and cooler tubes from dry ash abrasion in hot air ducts. • Food Processing Boilers – Applied in steam systems requiring corrosion resistance and thermal control under hygienic conditions. • HVAC and Utility Boilers – Installed in auxiliary boilers where conditions do not require high-alloy materials but demand durability. • Pulp and Paper Mills – Protects lower furnace zone tubes and stack-side economizers from condensate corrosion and soot accumulation. • Sugar and Distillery Plants – Guards process steam and heat recovery tubes from ash and scale in biomass and bagasse-fired units. Conclusion The SS 430 Half Round Tube Shield by Ladhani Metal Corporation is a durable, cost-efficient solution for protecting tubing systems in environments where moderate corrosion resistance, good oxidation behavior, and thermal stability are essential. It is best suited for dry, low to mid-temperature gas flow areas where the mechanical and thermal loads are not extreme. The ferritic stainless steel structure provides a favorable balance of performance and economy, particularly in large-scale power and process plants. With precision manufacturing, tailored dimensions, and reliable service, Ladhani Metal Corporation delivers proven tube protection technology trusted across multiple industries. For custom orders, sizing assistance, or to request a technical quote, please contact Ladhani Metal Corporation.

DIN 2633 duplex steel flanges PN 16 are precision-manufactured weld neck flanges designed according to the DIN 2633 standard, ideal for medium-pressure piping systems operating up to 16 bar (232 psi). These flanges are crafted from duplex stainless steels that combine the benefits of austenitic and ferritic microstructures, offering excellent mechanical strength, superior resistance to stress corrosion cracking, and enhanced durability in aggressive chemical and chloride-containing environments. They are ideal for applications where both corrosion resistance and high strength are essential. Ladhani Metal Corporation is a leading global manufacturer and supplier of duplex steel flanges, recognized for high-quality production, dimensional accuracy, and strict compliance with international standards. All flanges undergo rigorous inspection and testing to ensure reliable performance in challenging industrial conditions. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for medium-pressure pipelines requiring corrosion resistance and increased mechanical integrity. Flange Type: • Weld Neck Flanges These flanges feature a long tapered hub for improved flow characteristics and reduced mechanical stress at the weld area, ensuring stable and secure connections. • Flat Face (FF) Flanges Designed to provide a consistent sealing surface, especially effective when used with soft gaskets or when connecting to cast components. Duplex Steel Grades and Full Composition: Duplex 2205 (UNS S31803/S32205) • Chromium (Cr): 21.0 – 23.0% • Nickel (Ni): 4.5 – 6.5% • Molybdenum (Mo): 2.5 – 3.5% • Nitrogen (N): 0.08 – 0.20% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Carbon (C): ≤ 0.03% • Phosphorus (P): ≤ 0.03% • Sulfur (S): ≤ 0.02% • Iron (Fe): Balance Applications: Widely used in desalination plants, chemical process vessels, marine environments, and pulp and paper industries due to high strength and resistance to localized corrosion. Super Duplex 2507 (UNS S32750) • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 5.0% • Nitrogen (N): 0.24 – 0.32% • Manganese (Mn): ≤ 1.2% • Silicon (Si): ≤ 0.8% • Carbon (C): ≤ 0.03% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.02% • Iron (Fe): Balance Applications: Preferred in highly corrosive offshore, oil and gas, chemical, and high-chloride environments where superior strength and corrosion resistance are essential. Applications of DIN 2633 Duplex Steel Flanges PN 16: • Chemical and Petrochemical Plants Provides strong and corrosion-resistant connections for chemical reactors, storage tanks, and acid-handling systems. • Marine and Offshore Engineering Suitable for submerged systems, seawater cooling, and ballast water piping due to excellent resistance to chloride-induced corrosion. • Pulp and Paper Industry Performs reliably in bleaching and chemical recovery processes where both chemical resistance and strength are required. • Desalination and Water Treatment Ideal for high-salinity water systems and reverse osmosis pipelines requiring durable, corrosion-resistant components. • Oil and Gas Refineries Used in pipelines, pressure vessels, and heat exchangers subjected to sour gas and high-pressure operating environments. Key Features: • Manufactured to DIN 2633 standard • PN 16 pressure class for medium-pressure service • Weld neck configuration supports vibration resistance and proper alignment • Available in Duplex 2205 and Super Duplex 2507 grades • High resistance to stress corrosion cracking, pitting, and crevice corrosion • Excellent mechanical strength and fatigue resistance • Custom sizes, finishes, and specifications available upon request Conclusion: DIN 2633 duplex steel flanges PN 16 from Ladhani Metal Corporation offer an optimal combination of strength, corrosion resistance, and reliability for use in harsh industrial conditions. With high-performance duplex and super duplex materials, these flanges are the preferred choice for applications in chemical processing, offshore platforms, and desalination plants. For detailed technical support, customized configurations, or pricing, contact Ladhani Metal Corporation today.

DIN 2628 Duplex steel flanges PN 250 are high-strength weld neck flanges designed according to the DIN 2628 standard for use in high-pressure systems up to 250 bar (3625 psi). Fabricated from Duplex stainless steels, these flanges offer an ideal balance of strength and corrosion resistance, combining the beneficial properties of both austenitic and ferritic stainless steels. Their robust mechanical performance, excellent resistance to stress corrosion cracking, and superior weldability make them well-suited for critical applications in aggressive service environments. Ladhani Metal Corporation manufactures and exports premium-grade Duplex steel flanges that meet stringent international standards for quality, reliability, and performance. Our DIN 2628 PN 250 Duplex steel weld neck flanges are widely used in sectors such as oil and gas, desalination, petrochemical processing, pulp and paper, and marine industries. With precision engineering and consistent quality, these flanges are designed to withstand high pressure, corrosive media, and mechanical stress. Pressure Rating: • PN 250 (250 bar / 3625 psi): Suitable for high-pressure systems requiring excellent structural integrity, corrosion resistance, and reliable sealing in dynamic conditions. Flange Type: • Weld Neck Flanges These flanges feature a tapered neck, offering high fatigue resistance by reducing stress concentration at the weld area. Ideal for applications with high pressure, high temperature, or repeated thermal cycling. • Flat Face (FF) Flanges Flat face design provides uniform gasket loading, minimizing the risk of flange deformation. Suitable for systems using brittle materials or low-pressure cast components. Duplex Steel Grades and Composition: Duplex 2205 (UNS S32205 / S31803) • Chromium (Cr): 21.0 – 23.0% • Nickel (Ni): 4.5 – 6.5% • Molybdenum (Mo): 2.5 – 3.5% • Nitrogen (N): 0.14 – 0.20% • Iron (Fe): Balance • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Carbon (C): ≤ 0.03% Applications: Offers excellent corrosion resistance, particularly to chloride-induced stress corrosion cracking and pitting. Commonly used in offshore oil rigs, chemical tanks, heat exchangers, and pressure vessels. Applications of DIN 2628 Duplex Steel Flanges PN 250: • Oil and Gas Exploration Resistant to sour gas, chloride attack, and high mechanical loads in subsea and topside environments. • Chemical Processing Plants Used in aggressive chemical systems, reactors, and storage vessels requiring high corrosion resistance. • Marine and Offshore Structures Reliable in saltwater applications, such as ballast systems, risers, and flowlines. • Pulp and Paper Industry Withstands acidic and alkaline process chemicals used in bleaching and pulping operations. • Water Treatment and Desalination Ideal for handling brine and high-chloride content fluids in RO and thermal desalination systems. Key Features: • Conforms to DIN 2628 standards • PN 250 pressure rating for high-pressure, heavy-duty systems • Weld neck configuration for excellent mechanical support and minimal stress concentration • Flat face variant ensures even gasket loading and leak-proof operation • Available in Duplex 2205 and Super Duplex 2507 grades • Excellent resistance to chloride stress corrosion, pitting, and crevice corrosion • High tensile and yield strength for demanding industrial conditions • Custom sizes, pressure ratings, and surface finishes available upon request Conclusion: DIN 2628 Duplex Steel Flanges PN 250 from Ladhani Metal Corporation are the optimal solution for applications requiring superior corrosion resistance, high mechanical strength, and reliable sealing performance under extreme pressure. Available in Duplex 2205 and Super Duplex 2507, these flanges offer outstanding performance across various aggressive industrial environments. For detailed technical specifications or to request a customized quotation, please contact Ladhani Metal Corporation.