DIN 2633 carbon steel flanges PN 16 are reliable weld neck flanges manufactured in compliance with the DIN 2633 standard. Designed for use in medium-pressure piping systems with a pressure rating of up to 16 bar (232 psi), these flanges are fabricated from high-quality carbon steel, providing dependable mechanical strength and ease of fabrication. They are widely utilized in a range of general industrial and utility applications where corrosion resistance demands are moderate. Ladhani Metal Corporation is a globally trusted manufacturer and supplier of carbon steel flanges, recognized for high-precision production, rigorous quality assurance, and strict adherence to international material and dimensional standards. Every flange is tested to ensure consistent performance, mechanical integrity, and compatibility with a variety of piping systems. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for medium-pressure systems requiring strong, cost-effective, and durable connections. Flange Type: • Weld Neck Flanges Featuring an extended tapered hub, weld neck flanges help evenly distribute mechanical stress and ensure secure, vibration-resistant joints, particularly effective in systems subject to bending or thermal expansion. • Flat Face (FF) Flanges Ideal for use with soft gaskets or cast iron components, flat face flanges ensure even gasket compression, reducing the risk of flange warping or over-tightening. Carbon Steel Grades and General Composition: Typical Carbon Steel Grade: ASTM A105 (for forged carbon steel flanges) • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% • Iron (Fe): Balance Applications: Carbon steel flanges to DIN 2633 PN 16 are widely applied in environments where corrosion resistance is not the primary concern but where mechanical strength, weldability, and cost-efficiency are essential. Applications of DIN 2633 Carbon Steel Flanges PN 16: • Power Plants Used in steam, water, and air systems for medium-pressure operations. • Water Treatment and Distribution Well-suited for water mains, treatment facilities, and irrigation networks where strength and reliability are critical. • Petrochemical and Refining Industries Employed in non-corrosive process piping, utility lines, and support systems. • HVAC and Fire Protection Systems Ideal for chilled water, fire suppression, and compressed air applications. • General Industrial Manufacturing Used in structural piping systems and mechanical infrastructure with stable temperature and pressure conditions. Key Features: • Manufactured to DIN 2633 specifications • PN 16 pressure rating for medium-duty service • Weld neck configuration provides robust, leak-resistant connections • Cost-effective and easy to fabricate and install • Excellent machinability and weldability • Available in various sizes and configurations • Coating and corrosion protection options available upon request Conclusion: DIN 2633 carbon steel flanges PN 16 from Ladhani Metal Corporation are engineered for dependable performance in standard industrial environments. With proven strength, versatility, and affordability, these flanges are a reliable choice for water, steam, gas, and general utility applications. For detailed technical specifications, custom options, or pricing inquiries, contact Ladhani Metal Corporation today.

DIN 2630 Duplex flanges PN 2.5 are high-performance weld neck flanges manufactured to DIN 2630 standards, specifically designed for low-pressure applications up to 2.5 bar (36.25 psi). These flanges are made from Duplex stainless steels such as Duplex 2205 and Super Duplex 2507, which offer a balanced combination of high strength and excellent resistance to corrosion, stress corrosion cracking, and pitting. Engineered for demanding environments, these flanges provide long-lasting reliability in low-pressure systems exposed to aggressive chemicals and high temperatures. Ladhani Metal Corporation is a trusted global supplier and manufacturer of Duplex flanges, known for consistent quality and technical expertise. Our DIN 2630 PN 2.5 Duplex weld neck flanges are widely used in offshore, chemical, petrochemical, and marine industries where both mechanical performance and corrosion resistance are essential. Each flange undergoes rigorous quality control to ensure conformance with international standards and application-specific requirements. Pressure Rating: • PN 2.5 (2.5 bar / 36.25 psi): Designed for low-pressure operations requiring enhanced strength and superior corrosion resistance. Flange Type: • Weld Neck Flanges Designed with a tapered hub to evenly distribute stress and minimize erosion and turbulence in the flow path, making them suitable for high-integrity piping connections. • Flat Face (FF) Flanges Flat face flanges ensure even gasket compression and are ideal for use with cast equipment or non-metallic gasket materials in low-pressure systems. Duplex Grades and Full Composition: Duplex 2205 (UNS S32205 / S31803) • Chromium (Cr): 21.0 – 23.0% • Nickel (Ni): 4.5 – 6.5% • Molybdenum (Mo): 2.5 – 3.5% • Nitrogen (N): 0.08 – 0.20% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Carbon (C): ≤ 0.03% • Iron (Fe): Balance Applications: Combines high strength with excellent resistance to pitting and crevice corrosion. Common in chemical process plants, desalination systems, and marine structures. Applications of DIN 2630 Duplex Flanges PN 2.5: • Offshore and Marine Engineering Used in piping systems exposed to seawater and harsh marine environments where strength and corrosion resistance are vital. • Chemical and Petrochemical Industry Ideal for handling corrosive process fluids, acids, and chloride-rich environments at low pressure. • Desalination Plants Used in brine systems and piping exposed to high chloride levels and fluctuating temperatures. • Oil and Gas Industry Applied in low-pressure sections of oil rigs, refineries, and gas processing systems where reliability and resistance to sulfide stress cracking are critical. Key Features: • Compliant with DIN 2630 specifications • PN 2.5 rating suitable for low-pressure service • Weld neck design provides high-integrity and stress-distributed connections • Flat face option for soft gasket compatibility and uniform sealing • Manufactured from Duplex and Super Duplex stainless steels for enhanced performance • High strength-to-weight ratio and excellent corrosion resistance • Custom sizes, pressure classes, and surface finishes available upon request Conclusion: DIN 2630 Duplex Flanges PN 2.5 from Ladhani Metal Corporation are engineered for performance in corrosive, high-stress environments where low-pressure service demands superior materials. Combining the strength and corrosion resistance of Duplex and Super Duplex alloys, these flanges ensure long-term durability and safety across a variety of critical applications. Contact Ladhani Metal Corporation for detailed specifications, customization options, or pricing information.

DIN 2627 Titanium Flanges PN 400 are high-integrity blind flanges manufactured from corrosion-resistant titanium alloys, engineered for extreme pressure applications. These flanges conform to the DIN 2627 standard and are specifically designed to close the end of a piping system, providing a reliable, leak-tight seal. With a pressure rating of PN 400 (400 bar / 5800 psi), these titanium blind flanges are ideal for high-pressure systems operating in chemically aggressive or high-temperature environments. Ladhani Metal Corporation is a globally recognized manufacturer and exporter of titanium flanges, offering top-quality components that comply with stringent international specifications. The DIN 2627 PN 400 titanium flanges are especially suited for high-demand sectors where superior material performance is essential under extreme mechanical and corrosive conditions. Pressure Rating: • PN 400 (400 bar / 5800 psi): Designed for ultra-high-pressure systems requiring secure isolation and sealing. These flanges ensure operational safety and long-term durability in critical gas, fluid, or chemical applications. Flange Type: • Blind Flanges These solid disk flanges are used to terminate the flow in a pipeline or vessel and can be easily removed for inspection or system modification. They are essential in high-pressure systems for ensuring tight sealing without any flow path. • Flat Face (FF) Flanges Utilized with full-face gaskets and flat mating surfaces, flat face blind flanges distribute bolt load evenly to prevent flange deformation, particularly when paired with brittle or non-metallic components. Titanium Grades and Composition: Titanium Grade 2 (UNS R50400) Composition: • Titanium (Ti): ≥ 98.5% • Trace Elements: Iron (Fe), Oxygen (O), Carbon (C), Nitrogen (N), Hydrogen (H) Applications: Grade 2 titanium offers excellent corrosion resistance, good ductility, and weldability, making it suitable for high-pressure chemical processing, marine systems, and water treatment environments. Titanium Grade 5 (Ti-6Al-4V, UNS R56400) Composition: • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% Applications: Grade 5 titanium delivers superior tensile strength and resistance to fatigue, high temperatures, and corrosion. It is the preferred material for aerospace, defense, offshore drilling, and pressurized chemical applications requiring durability under extreme conditions. Applications of DIN 2627 Titanium Flanges PN 400: • High-Pressure Chemical and Petrochemical Systems Used to terminate pipelines in systems transporting reactive or corrosive chemicals under high pressure. • Offshore Oil and Gas Platforms Ideal for sealing high-pressure flowlines and isolation points exposed to seawater and mechanical stress. • Aerospace Hydraulic and Fuel Systems Applied in high-performance systems requiring lightweight, pressure-resistant sealing. • Marine Engineering and Subsea Installations Deployed in subsea structures and marine piping where both high pressure and chloride-induced corrosion are concerns. • Nuclear and Power Generation Suited for extreme environments involving radioactive, corrosive, or high-temperature media. • Industrial Process Systems Used in closed-loop systems, autoclaves, reactors, and high-pressure vessels. Key Features: • Manufactured according to DIN 2627 specifications • PN 400 pressure rating for ultra-high-pressure environments • Exceptional corrosion resistance in seawater and chemical exposure • Titanium Grade 2 and Grade 5 options for specific strength and application needs • Blind flange design for secure system termination • Flat face flanges ensure optimal gasket compatibility and load balance • High strength-to-weight ratio and long service life • Suitable for offshore, aerospace, chemical, and power industries • Custom configurations, sizes, and finishes available upon request Conclusion: DIN 2627 Titanium Flanges PN 400 by Ladhani Metal Corporation are engineered to meet the highest standards of performance in ultra-high-pressure systems. Whether in offshore drilling, aerospace, or advanced chemical processes, these flanges offer unmatched reliability, corrosion resistance, and structural integrity. Contact Ladhani Metal Corporation for technical guidance, material selection, or customized solutions for your specific project needs.

DIN 2633 Monel flanges PN 16 are precision-engineered weld neck flanges manufactured in accordance with the DIN 2633 standard. Designed for pipeline systems operating at pressures up to 16 bar (232 psi), these flanges provide exceptional resistance to corrosive environments, including seawater, acids, and alkalis. Manufactured from high-performance Monel alloys such as Monel 400 and Monel K500, they combine outstanding mechanical strength with excellent corrosion resistance, making them suitable for demanding industrial and marine applications. Ladhani Metal Corporation is a trusted global manufacturer and supplier of Monel flanges, known for superior material quality, dimensional accuracy, and strict compliance with international standards. Each flange undergoes rigorous quality checks and testing to ensure consistent performance in critical service conditions. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for medium-pressure systems requiring corrosion resistance and structural reliability. Flange Type: • Weld Neck Flanges Designed with a long tapered hub to ensure smooth flow transitions, proper pipe alignment, and minimized stress concentration for high-integrity connections. • Flat Face (FF) Flanges Provides a uniform sealing surface ideal for systems with soft gasket materials or cast mating components, ensuring optimal gasket compression. Monel Grades and Full Composition: Monel 400 • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): ≤ 2.5% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% Applications: Widely used in marine engineering, chemical processing, pump and valve components, and environments exposed to hydrofluoric and sulfuric acids. Monel K500 • Nickel (Ni): ≥ 63.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2.0% • Carbon (C): ≤ 0.25% Applications: Suitable for high-strength applications in marine, oil and gas, and sour gas service environments. Offers improved mechanical properties over Monel 400 while retaining excellent corrosion resistance. Applications of DIN 2633 Monel Flanges PN 16: • Marine and Offshore Systems Ideal for saltwater piping, desalination systems, and submerged components due to excellent resistance to chloride stress corrosion. • Chemical Processing Industries Used in systems handling strong acids, alkalis, and organic solvents, especially hydrofluoric acid. • Oil and Gas Exploration Resistant to sour gas environments, high pressures, and corrosive drilling fluids. • Heat Exchangers and Condensers Monel flanges are preferred for their stability under fluctuating thermal loads and corrosive fluids. • Power Generation Used in cooling water and fuel handling systems where reliability under stress and corrosion is essential. Key Features: • Manufactured to DIN 2633 specifications • PN 16 rating for medium-pressure pipelines • Weld neck design for stress-distributed, leak-proof connections • Available in Monel 400 and K500 grades for tailored performance • Excellent resistance to corrosion in marine, acidic, and alkaline environments • High tensile strength and resistance to mechanical fatigue • Custom sizes, pressure classes, and finishes available on request Conclusion: DIN 2633 Monel Flanges PN 16 from Ladhani Metal Corporation offer robust performance in highly corrosive and pressure-sensitive applications. With superior resistance to seawater, acids, and harsh industrial chemicals, these flanges are engineered for longevity and strength in marine, chemical, and oil and gas systems. For custom configurations, technical advice, or pricing details, contact Ladhani Metal Corporation today.

Product name:1 inch titanium plate Grades: Gr5 Standard: ASTM B265 AMS 4911,ASTM F136 Thickness: δ1.0mm, 3.0mm, 6.0mm, 10mm, 12mm, 15mm 16mm, 20mm,25mm,30mm,35mm etc. Width:200-3000mm Length:500-6000mm Supply status: Annealed(M) Package: Carton box or plywood case. MTC: EN10204.3.1 certificate

Product name:titanium plate 6al-4v Unit price:$21.5-$55.8/kg Material: Titanium Grade 5(Ti6Al4V) Standard: ASTM/ASME B265, ASTM/ASME B4911 Demension: Thickness*1000*2000mm Thickness*3000*6000mm (Standard size); Thickness: 0.5mm; 0.8mm; 1.0mm; 1.2mm; 1.5mm; 2.0mm; 3.0mm; 4.0mm ......40mm etc

"LADHANI METAL CORPORATION is a professional Manufacturer of Stainless Steel Butt Weld , Socket Weld and Threaded Fittin.we have been producing A403/A403M-99a , A774/A774M-98, A182/182M , A182/A182M, A778 - A778-98 Stainless Steel Butt Weld Equal Tee since 1988. We are Manufacturer of Stainless Steel Butt Weld Equal Tee , Our products are manufactured using quality material and go through a rigorous quality check at all stages of production to ensure quality. LMC has an extensive history of Stainless Steel Butt Weld Equal Tee Manufacturing in india, and Exporting and Trading.We are India Origin Factory of Stainless Steel Butt Weld Equal Tee We at LMC has a wide selection at great prices to help you get creative. All the Stainless Steel Butt Weld Equal Tee are quality guaranteed. If you have any question, please feel free to contact us. Dimension Spec : ANSI B16.9, B16.28 , MSS SP-43 , SP-79 We Export Quality Fittings to United Arab Emirates,Qatar,Kuwait,Bahrain,Oman,Saudi Arabia,Iran." Stainless Steel Butt Weld Equal Tee Available In 1.4002, 1.4002, 1.4006, 1.4016, 1.4021, 1.4057, 1.4301, 1.4307, 1.431, 1.4311, 1.4313, 1.4318, 1.4362, 1.4371, 1.4401, 1.4404, 1.4429, 1.4438, 1.4462, 1.4509, 1.4512, 1.4541, 1.455, 1.4571, 1.4828, 1.4833, 1.4845, 201, 202, 301, 304, 309, 310, 316, 317, 321, 347, 405, 409, 410, 420, 430, 431, 436, 439, 2205, 2304, 00Cr17Ni14Mo2, 00Cr18Ti, 00Cr19Ni13Mo3, 08Ch18N10T, 08Ch18N12B, 0Cr13, 0Cr13Al, 0Cr17Ni12Mo2, 0Cr18Ni10Ti, 0Cr18Ni11Nb, 0Cr18Ni12Mo2Ti, 0Cr18Ni9, 0Cr25Ni20, 10Ch17N13M2T, 1Cr12, 1Cr17, 1Cr17Ni2, 1Cr17Ni7, 1Cr23Ni13, 201L, 201LN, 20Ch17N2, 20Ch23N18, 20Ch25N20S2, 301L, 301LN, 304H, 304L, 304LN, 309S, 310S, 316L, 316LN, 316Ti, 317L, 317LN, 410S, 436L, J-201, J-201L, J-201LN, J-202, J-204 Cu, J-2205, J-2304, J-301, J301L, J301LN, J-304, J-304H, J-304L, J-304LN, J-309, J-309S, J-310, J-310S, J-316, J-316L, J-316LN, J-316Ti, J-317, J31727, J-317L, J-317LN, J-31803, J-321, J-347, J-4, J-405, J-409, J-409M, J-409RC, J-410, J-410S, J-415, J-420, J-430, J-430Ti, J-431, J-436, J-436L, J-439, J-441, JBS, JSLAUS (J1), S20100, S20103, S20153, S20200, S20430, S30100, S30103, S30153, S30400, S30403, S30409, S30453, S30900, S30908, S31000, S31008, S31600, S31603, S31635, S31653, S31700, S31703, S31727, S31753, S31803, S32100, S32205, S32304, S34700, S40500, S40900, S41000, S41008, S41500, S42000, S43000, S43035, S43100, S43600, S43932, S43940, SUH310, SUH409, SUS201, SUS202, SUS301, SUS304, SUS304L, SUS304LN, SUS309S, SUS310S, SUS316, SUS316L, SUS316Ti, SUS317L, SUS321, SUS329J3L, SUS347, SUS403, SUS405, SUS410, SUS420JI, SUS430, SUS430LX, SUS436L, X02Cr17Ni12Mo2, X04Cr12, X04Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Nb, X04Cr18Ni10Ti, X04Cr19Ni9, X07Cr17, X10Cr17Mn6Ni4N20, X10Cr17Ni7, X10Cr18Mn9Ni5, X12Cr12, X12Cr13, X12CrMnNiN17-7-5, X12CrMnNiN18-9-5, X12CrNi17-7, X12CrNi25-21, X15Cr24Ni13, X15CrNiSi25-20, X17CrNi15-2, X20Cr13, X20Cr13, X20Cr25Ni20, X2CrMnNiN17-7-5, X2CrN N 23-4, X2CrNi18-9, X2CrNiMo17-13-2, X2CrNiMo18154, X2CrNiMoN 22-5-3, X2CrNiMoN17-11-2 SUS316LN, X2CrNiN18-10, X2CrNiN18-7, X2CrTi12, X2CrTiNb18, X3CrNiMo13-4, X3CrTi17, X3CrTi17, X5CrNi18-10, X5CrNiMo17-12-2, X6Cr-13, X6Cr17, X6CrAl13, X6CrNiMoTi17-12-2, X6CrNiNb18-10, X6CrNiTi18-10

"LADHANI METAL CORPORATION is a professional Manufacturer of Stainless Steel Butt Weld , Socket Weld and Threaded Fittin.we have been producing A403/A403M-99a , A774/A774M-98, A182/182M , A182/A182M, A778 - A778-98 Stainless Steel Socket Weld Equal Tee since 1988. We are Manufacturer of Stainless Steel Socket Weld Equal Tee , Our products are manufactured using quality material and go through a rigorous quality check at all stages of production to ensure quality. LMC has an extensive history of Stainless Steel Socket Weld Equal Tee Manufacturing in india, and Exporting and Trading.We are India Origin Factory of Stainless Steel Socket Weld Equal Tee We at LMC has a wide selection at great prices to help you get creative. All the Stainless Steel Socket Weld Equal Tee are quality guaranteed. If you have any question, please feel free to contact us. Dimension Spec : ANSI B16.9, B16.28 , MSS SP-43 , SP-79 We Export Quality Fittings to United Arab Emirates,Qatar,Kuwait,Bahrain,Oman,Saudi Arabia,Iran." Stainless Steel Socket Weld Equal Tee Available In 1.4002, 1.4002, 1.4006, 1.4016, 1.4021, 1.4057, 1.4301, 1.4307, 1.431, 1.4311, 1.4313, 1.4318, 1.4362, 1.4371, 1.4401, 1.4404, 1.4429, 1.4438, 1.4462, 1.4509, 1.4512, 1.4541, 1.455, 1.4571, 1.4828, 1.4833, 1.4845, 201, 202, 301, 304, 309, 310, 316, 317, 321, 347, 405, 409, 410, 420, 430, 431, 436, 439, 2205, 2304, 00Cr17Ni14Mo2, 00Cr18Ti, 00Cr19Ni13Mo3, 08Ch18N10T, 08Ch18N12B, 0Cr13, 0Cr13Al, 0Cr17Ni12Mo2, 0Cr18Ni10Ti, 0Cr18Ni11Nb, 0Cr18Ni12Mo2Ti, 0Cr18Ni9, 0Cr25Ni20, 10Ch17N13M2T, 1Cr12, 1Cr17, 1Cr17Ni2, 1Cr17Ni7, 1Cr23Ni13, 201L, 201LN, 20Ch17N2, 20Ch23N18, 20Ch25N20S2, 301L, 301LN, 304H, 304L, 304LN, 309S, 310S, 316L, 316LN, 316Ti, 317L, 317LN, 410S, 436L, J-201, J-201L, J-201LN, J-202, J-204 Cu, J-2205, J-2304, J-301, J301L, J301LN, J-304, J-304H, J-304L, J-304LN, J-309, J-309S, J-310, J-310S, J-316, J-316L, J-316LN, J-316Ti, J-317, J31727, J-317L, J-317LN, J-31803, J-321, J-347, J-4, J-405, J-409, J-409M, J-409RC, J-410, J-410S, J-415, J-420, J-430, J-430Ti, J-431, J-436, J-436L, J-439, J-441, JBS, JSLAUS (J1), S20100, S20103, S20153, S20200, S20430, S30100, S30103, S30153, S30400, S30403, S30409, S30453, S30900, S30908, S31000, S31008, S31600, S31603, S31635, S31653, S31700, S31703, S31727, S31753, S31803, S32100, S32205, S32304, S34700, S40500, S40900, S41000, S41008, S41500, S42000, S43000, S43035, S43100, S43600, S43932, S43940, SUH310, SUH409, SUS201, SUS202, SUS301, SUS304, SUS304L, SUS304LN, SUS309S, SUS310S, SUS316, SUS316L, SUS316Ti, SUS317L, SUS321, SUS329J3L, SUS347, SUS403, SUS405, SUS410, SUS420JI, SUS430, SUS430LX, SUS436L, X02Cr17Ni12Mo2, X04Cr12, X04Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Nb, X04Cr18Ni10Ti, X04Cr19Ni9, X07Cr17, X10Cr17Mn6Ni4N20, X10Cr17Ni7, X10Cr18Mn9Ni5, X12Cr12, X12Cr13, X12CrMnNiN17-7-5, X12CrMnNiN18-9-5, X12CrNi17-7, X12CrNi25-21, X15Cr24Ni13, X15CrNiSi25-20, X17CrNi15-2, X20Cr13, X20Cr13, X20Cr25Ni20, X2CrMnNiN17-7-5, X2CrN N 23-4, X2CrNi18-9, X2CrNiMo17-13-2, X2CrNiMo18154, X2CrNiMoN 22-5-3, X2CrNiMoN17-11-2 SUS316LN, X2CrNiN18-10, X2CrNiN18-7, X2CrTi12, X2CrTiNb18, X3CrNiMo13-4, X3CrTi17, X3CrTi17, X5CrNi18-10, X5CrNiMo17-12-2, X6Cr-13, X6Cr17, X6CrAl13, X6CrNiMoTi17-12-2, X6CrNiNb18-10, X6CrNiTi18-10

"LADHANI METAL CORPORATION is a professional Manufacturer of Stainless Steel Butt Weld , Socket Weld and Threaded Fittin.we have been producing A403/A403M-99a , A774/A774M-98, A182/182M , A182/A182M, A778 - A778-98 Stainless Steel Threaded Pipe Tee since 1988. We are Manufacturer of Stainless Steel Threaded Pipe Tee , Our products are manufactured using quality material and go through a rigorous quality check at all stages of production to ensure quality. LMC has an extensive history of Stainless Steel Threaded Pipe Tee Manufacturing in india, and Exporting and Trading.We are India Origin Factory of Stainless Steel Threaded Pipe Tee We at LMC has a wide selection at great prices to help you get creative. All the Stainless Steel Threaded Pipe Tee are quality guaranteed. If you have any question, please feel free to contact us. Dimension Spec : ANSI B16.9, B16.28 , MSS SP-43 , SP-79 We Export Quality Fittings to United Arab Emirates,Qatar,Kuwait,Bahrain,Oman,Saudi Arabia,Iran." Stainless Steel Threaded Pipe Tee Available In 1.4002, 1.4002, 1.4006, 1.4016, 1.4021, 1.4057, 1.4301, 1.4307, 1.431, 1.4311, 1.4313, 1.4318, 1.4362, 1.4371, 1.4401, 1.4404, 1.4429, 1.4438, 1.4462, 1.4509, 1.4512, 1.4541, 1.455, 1.4571, 1.4828, 1.4833, 1.4845, 201, 202, 301, 304, 309, 310, 316, 317, 321, 347, 405, 409, 410, 420, 430, 431, 436, 439, 2205, 2304, 00Cr17Ni14Mo2, 00Cr18Ti, 00Cr19Ni13Mo3, 08Ch18N10T, 08Ch18N12B, 0Cr13, 0Cr13Al, 0Cr17Ni12Mo2, 0Cr18Ni10Ti, 0Cr18Ni11Nb, 0Cr18Ni12Mo2Ti, 0Cr18Ni9, 0Cr25Ni20, 10Ch17N13M2T, 1Cr12, 1Cr17, 1Cr17Ni2, 1Cr17Ni7, 1Cr23Ni13, 201L, 201LN, 20Ch17N2, 20Ch23N18, 20Ch25N20S2, 301L, 301LN, 304H, 304L, 304LN, 309S, 310S, 316L, 316LN, 316Ti, 317L, 317LN, 410S, 436L, J-201, J-201L, J-201LN, J-202, J-204 Cu, J-2205, J-2304, J-301, J301L, J301LN, J-304, J-304H, J-304L, J-304LN, J-309, J-309S, J-310, J-310S, J-316, J-316L, J-316LN, J-316Ti, J-317, J31727, J-317L, J-317LN, J-31803, J-321, J-347, J-4, J-405, J-409, J-409M, J-409RC, J-410, J-410S, J-415, J-420, J-430, J-430Ti, J-431, J-436, J-436L, J-439, J-441, JBS, JSLAUS (J1), S20100, S20103, S20153, S20200, S20430, S30100, S30103, S30153, S30400, S30403, S30409, S30453, S30900, S30908, S31000, S31008, S31600, S31603, S31635, S31653, S31700, S31703, S31727, S31753, S31803, S32100, S32205, S32304, S34700, S40500, S40900, S41000, S41008, S41500, S42000, S43000, S43035, S43100, S43600, S43932, S43940, SUH310, SUH409, SUS201, SUS202, SUS301, SUS304, SUS304L, SUS304LN, SUS309S, SUS310S, SUS316, SUS316L, SUS316Ti, SUS317L, SUS321, SUS329J3L, SUS347, SUS403, SUS405, SUS410, SUS420JI, SUS430, SUS430LX, SUS436L, X02Cr17Ni12Mo2, X04Cr12, X04Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Nb, X04Cr18Ni10Ti, X04Cr19Ni9, X07Cr17, X10Cr17Mn6Ni4N20, X10Cr17Ni7, X10Cr18Mn9Ni5, X12Cr12, X12Cr13, X12CrMnNiN17-7-5, X12CrMnNiN18-9-5, X12CrNi17-7, X12CrNi25-21, X15Cr24Ni13, X15CrNiSi25-20, X17CrNi15-2, X20Cr13, X20Cr13, X20Cr25Ni20, X2CrMnNiN17-7-5, X2CrN N 23-4, X2CrNi18-9, X2CrNiMo17-13-2, X2CrNiMo18154, X2CrNiMoN 22-5-3, X2CrNiMoN17-11-2 SUS316LN, X2CrNiN18-10, X2CrNiN18-7, X2CrTi12, X2CrTiNb18, X3CrNiMo13-4, X3CrTi17, X3CrTi17, X5CrNi18-10, X5CrNiMo17-12-2, X6Cr-13, X6Cr17, X6CrAl13, X6CrNiMoTi17-12-2, X6CrNiNb18-10, X6CrNiTi18-10