Ladhani Metal Corporation offers 1Cr13 Half Round Tube Shields designed to protect reheater (R/H) tubes in boilers, power plants, and industrial steam systems. Reheater tubes carry steam through the reheater section of the boiler, where it is reheated after partial expansion in the high-pressure turbine to improve efficiency and minimize moisture formation. Manufactured from martensitic stainless steel grade 1Cr13, these shields provide good mechanical strength, oxidation resistance, and reliable protection against erosion and wear in high-temperature boiler environments. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in high-velocity and ash-laden zones Ladhani Metal Corporation manufactures, supplies, and exports 1Cr13 Half Round Tube Shields in a variety of lengths, diameters, and thicknesses to meet both domestic and international requirements. 1Cr13 Grade Chemical Composition – Martensitic Stainless Steel • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.00 – 14.00% • Nickel (Ni): ≤ 0.60% • Iron (Fe): Balance Applications: Well-suited for reheater tubes in thermal power plants, industrial steam plants, and boilers requiring strong mechanical performance with moderate corrosion and oxidation resistance. Uses • Shields reheater tubes from erosion and flue gas oxidation • Protects against soot blower impact and abrasive ash particles • Extends service life of steam circuit components under elevated temperatures • Commonly used in WHRBs, HRSGs, and industrial boilers Features • Strong mechanical strength at high temperatures • Moderate oxidation and corrosion resistance in boiler atmospheres • Cost-effective solution for erosion-prone areas • Manufactured for precise fit and easy installation Applications • Power generation boilers – Protection for reheater sections exposed to erosion • Waste heat recovery boilers – Guards tubes from abrasive gas flows • Industrial steam systems – Reliable under medium-to-high temperature cycles • Process boilers – Provides extended service life in erosive conditions Conclusion The 1Cr13 Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation provides durable, cost-effective protection for boiler tubes exposed to erosion and high-temperature oxidation. Designed for precision fit and long service life, these shields are available in a wide range of export-ready specifications. For supply and technical inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation offers SS 430 Half Round Tube Shields specially designed to protect reheater (R/H) tubes in boilers, power plants, and industrial steam systems. Reheater tubes carry steam through the reheater section of the boiler, where it is reheated after partial expansion in the high-pressure turbine to improve efficiency and minimize moisture. Manufactured from ferritic stainless steel grade SS 430, these shields provide excellent resistance to oxidation, scaling, and moderate corrosion while offering good thermal conductivity and formability for long-term service in demanding boiler environments. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in high-velocity and ash-laden zones Ladhani Metal Corporation manufactures, supplies, and exports SS 430 Half Round Tube Shields in different lengths, diameters, and thicknesses, ensuring suitability for a wide range of domestic and international boiler applications. SS 430 Grade Chemical Composition – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.00 – 18.00% • Nickel (Ni): ≤ 0.50% • Iron (Fe): Balance Applications: Commonly used in reheater sections of thermal power plants, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs) where scaling resistance and cost-effective protection are required. Uses • Shields reheater tubes against erosion, scaling, and oxidation • Protects R/H tubes in zones exposed to high flue gas velocity and ash particles • Extends tube service life under thermal cycling and corrosive atmospheres • Applicable in utility boilers, WHRBs, HRSGs, and process steam plants Features • Excellent resistance to oxidation and scaling at elevated temperatures • Cost-effective protection with good mechanical strength • Superior thermal conductivity for stable heat transfer • Custom-fit design for precise installation and maximum coverage Applications • Power generation boilers – Reheater tube protection in oxidizing atmospheres • Waste heat recovery systems – Reliable shield against particle erosion • Industrial boilers – Durable under varying flue gas conditions • Petrochemical and process plants – Efficient in moderate corrosive service environments Conclusion The SS 430 Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation offers dependable, cost-effective protection against scaling, oxidation, and erosion in high-temperature boiler conditions. With good mechanical strength and precision fit, these shields reduce maintenance needs and extend tube service life. Available in customized, export-ready specifications to meet global industry requirements. For supply and technical assistance, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation offers 1Cr18Ni9Ti Outer Half Round 90 Degree Bend Tube Shields designed to protect the outer curvature of U-bends and 90-degree tube turns in boilers, heat exchangers, superheaters, and reheaters. Manufactured from the austenitic stainless steel grade 1Cr18Ni9Ti (equivalent to AISI 321), these shields provide excellent corrosion resistance, high-temperature strength, and resistance to intergranular corrosion. The semi-cylindrical geometry is precision-engineered to conform to the return bends of tubes, offering reliable protection from erosion due to flue gas velocity, soot blower blasts, and ash impingement. 1Cr18Ni9Ti shields are commonly used in high-temperature steam generation systems, including power plants and industrial thermal processing units, where durability under oxidizing and slightly corrosive conditions is critical. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of 1Cr18Ni9Ti Outer Half Round 90 Degree Bend Tube Shields, providing tailored solutions to meet specific plant configurations and thermal requirements. 1Cr18Ni9Ti Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 x C content • Iron (Fe): Balance Uses • Protection of 90-degree return bends in superheaters and reheaters • Suitable for HRSG and WHRB applications in gas turbine and industrial waste heat recovery • Shields tube bends from scaling, oxidation, and erosive flue gas flow • Applied in furnaces and process heaters requiring long-term thermal stability Features • Superior corrosion resistance – Performs reliably in oxidizing and mildly corrosive environments • High thermal stability – Maintains structural integrity in elevated temperature conditions • Intergranular corrosion resistance – Titanium stabilization prevents carbide precipitation • Accurate fit – Formed to match specific bend radii and tube sizes for maximum protection • Easy installation – Supports clamping, welding, or banding as per site requirements • Available variants – Offered in multiple lengths, wall thicknesses, and diameters for precise application Applications • Power generation – Protects boiler tube bends in high-temperature steam lines • Petrochemical industries – Ensures thermal integrity in fired heaters and reformers • Industrial boilers – Guards against erosion and scaling in heat recovery systems • Cement and metallurgical plants – Used in tube bends of heat exchangers and gas coolers Conclusion The 1Cr18Ni9Ti Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation delivers high-performance protection for boiler and furnace tube bends operating under high heat and oxidizing conditions. With excellent corrosion resistance, thermal reliability, and formability, it is a robust and long-lasting solution for demanding environments. For customized configurations, technical assistance, or material consultation, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Ladhani Metal Corporation offers SS 430 Outer Half Round 90 Degree Bend Tube Shields designed to protect the outer arc of U-bend and 90-degree curved tubes in boilers, heat exchangers, superheaters, and reheaters. Manufactured from ferritic stainless steel grade SS 430, these shields provide good corrosion resistance, excellent formability, and thermal stability in moderately aggressive service environments. SS 430 is particularly suitable for applications where resistance to oxidation and surface scaling is needed without exposure to highly corrosive agents. The semi-cylindrical profile is precision-formed to match the outer curvature of return tube bends, offering a physical barrier against soot-blower impact, flue gas erosion, and ash particle wear. SS 430 shields are commonly used in utility and industrial boilers operating under dry, mildly corrosive, and thermally demanding conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 430 Outer Half Round 90 Degree Bend Tube Shields, offering custom configurations to suit specific plant layouts and service requirements. SS 430 Grade Chemical Composition – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for power plants, WHRBs, HRSGs, and general industrial systems requiring protection for tube bends in dry heat and oxidizing environments. Uses • Shielding outer 90-degree bends in superheaters and reheaters • Applied in WHRBs and HRSG return coils exposed to dry flue gas • Protects against moderate erosion and oxidation in utility boilers • Suitable for curved tubes in industrial furnaces and heat recovery units Features • Cost-effective protection – Combines durability with economical material choice • Oxidation resistance – Performs well in clean flue gas and dry heat exposure • Thermal reliability – Withstands repeated heating cycles without deformation • Custom-fit geometry – Formed to match exact bend radius for tight coverage • Versatile installation – Can be clamped, banded, or tack welded as needed • Multiple sizes – Offered in a variety of thicknesses, lengths, and radii Applications • Thermal power stations – Shields steam lines and return bends from surface scaling • Waste heat boilers – Guards tube bends in clean gas recovery systems • Process heaters – Used in less corrosive gas heating environments • Cement and food processing industries – Protects tube curves from oxidation Conclusion The SS 430 Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation provides durable and cost-efficient protection for tube bends exposed to dry heat, oxidation, and moderate wear. With good formability and thermal performance, these shields are ideal for systems where corrosion levels are controlled but mechanical shielding is essential. For custom sizing, material selection, or technical specifications, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Half Round Tube Shield Ladhani Metal Corporation manufactures SS 430 Half Round Straight Tube Shields to provide cost-effective protection for straight boiler and heat exchanger tubes in mildly corrosive and oxidizing environments. SS 430 is a ferritic stainless steel known for its good resistance to oxidation, thermal fatigue, and moderate corrosion in non-aggressive media. These shields are ideal for shielding tubes exposed to dry flue gases, ash, and scale buildup. SS 430 Half Round Straight Tube Shield The SS 430 Half Round Straight Tube Shield is designed to fit snugly over the exterior surface of straight tubes, forming a physical barrier that resists thermal cycling, soot-blowing erosion, and mechanical wear. With its high chromium content, SS 430 provides enhanced resistance to scaling at elevated temperatures. It is commonly used in power plants, economizers, WHRBs, and industrial boilers where consistent performance and affordability are important. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 430 Half Round Straight Tube Shields, offering practical shielding solutions to extend the life of tubes in thermal and process equipment. Material Grade SS 430 – Ferritic stainless steel with good oxidation resistance and moderate corrosion protection in non-chloride environments. Chemical Composition of SS 430 • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Iron (Fe): Balance Applications: Suitable for dry, clean flue gas zones and mildly corrosive environments with minimal exposure to chlorides or strong acids. Uses • Straight tube shielding in boiler flue gas paths • Protection in economizers and preheater sections • Used in WHRBs for dry particulate erosion prevention • Ideal for food, paper, and textile industries with clean gas flow • Applied in low-to-moderate temperature furnace and duct systems Features • Good oxidation resistance – Performs well in clean, dry heat environments • Cost-efficient – Affordable solution for basic erosion protection • Magnetic ferritic grade – Offers dimensional stability under temperature cycling • Resistant to scaling – Up to ~815°C in intermittent service • Customizable – Lengths, radius, and thickness tailored to project needs • Easy attachment – Suitable for weld-on, clamp-on, or banded installation Applications • thermal boilers – Low-cost shielding for tubes in flue passages • process heat exchangers – Protects tubes in moderately aggressive environments • industrial dryers and ovens – Used in clean-air heating systems • WHRBs – Economical shield in clean-burning furnaces • general steam systems – Prevents tube wear and extends service life Conclusion SS 430 Half Round Straight Tube Shields by Ladhani Metal Corporation are a durable and economical choice for protecting straight tubes from heat, scale, and dry flue gas abrasion. With its balance of thermal resistance and cost-effectiveness, it serves reliably across a wide range of industrial systems. For custom configurations and bulk orders, contact Ladhani Metal Corporation.

Half Round Tube Shield Ladhani Metal Corporation manufactures SS 410 Half Round Straight Tube Shields to offer cost-effective protection for boiler and heat exchanger tubes in moderate temperature and corrosive environments. SS 410 is a martensitic stainless steel that provides good corrosion resistance, mechanical strength, and wear resistance, making it suitable for shielding straight tubes exposed to flue gas erosion, ash deposits, and mild chemical exposure. SS 410 Half Round Straight Tube Shield The SS 410 Half Round Straight Tube Shield is designed to fit over the external surface of straight tubes, acting as a barrier against abrasive particles, high-velocity flue gases, and mechanical wear. It is widely used in power plants, waste heat recovery systems, and steam processing units where cost-effective protection is needed for tubes operating at medium temperatures. The material offers ease of fabrication and reliable resistance to oxidation up to 650°C. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 410 Half Round Straight Tube Shields, delivering durable thermal protection for industrial piping systems. Material Grade SS 410 – Martensitic stainless steel known for its hardness, oxidation resistance, and moderate corrosion protection. Chemical Composition of SS 410 • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Iron (Fe): Balance Applications: Suitable for environments involving dry flue gases, fly ash, and light acidic fumes; commonly used in economizers and low-temperature steam sections. Uses • Straight tube protection in boilers and economizers • Installed in air preheaters and low-temperature superheaters • Applied in WHRBs to guard tubes from ash and erosion • Used in industrial steam systems with mild corrosion risk • Shields tubes in pulp, paper, and food processing units Features • Good oxidation resistance – Up to moderate temperatures (~650°C) • High hardness – Offers resistance against flue gas abrasion and ash impact • Cost-effective – Economical choice for medium-duty service • Easy to fabricate and weld – Suitable for various attachment methods • Customizable – Available in different sizes, lengths, and thicknesses • Enhances tube durability – Reduces wear and minimizes shutdowns Applications • thermal power plants – Used in low-heat sections for erosion protection • steam processing – Protects steam-carrying tubes from scale and impact • waste heat recovery units – Resists abrasive exhaust gases and particulate matter • cement and steel plants – Applied in dust-prone, dry gas environments • food and chemical industries – Suitable for non-aggressive process gas shielding Conclusion The SS 410 Half Round Straight Tube Shield from Ladhani Metal Corporation is a practical and robust solution for extending the life of tubes operating under dry, abrasive, and moderately corrosive service conditions. Its hardness and heat resistance make it ideal for protecting straight tube sections in a wide range of industrial systems. For standard and custom configurations, contact Ladhani Metal Corporation for technical consultation and orders.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are high-strength protective components used to shield boiler tubes, superheaters, and heat exchanger coils from ash impact, flue gas erosion, scaling, and corrosion. These shields are commonly used in thermal power plants, steam generating systems, and industrial boilers to protect tube surfaces and reduce wear in critical heat transfer zones. Their half-round profile is designed for easy installation and secure fitment over curved or straight tubes exposed to mechanical or thermal stress. SS 420 Half Round Tube Shield for LTSH Tube The SS 420 Half Round Tube Shield is manufactured from martensitic stainless steel grade 420, which is known for its high hardness, good oxidation resistance, and moderate corrosion protection. This material provides excellent wear resistance in abrasive and dry flue gas environments. It is particularly suitable for Low Temperature Superheater (LTSH) applications, where tubes are exposed to fly ash erosion, gas turbulence, and mechanical abrasion at relatively lower temperatures. SS 420 is often used where durability and strength are more critical than corrosion resistance alone. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 420 Half Round Tube Shields for LTSH applications, offering reliable protection where mechanical wear and gas erosion are of primary concern. Chemical Composition of SS 420 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.40% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Iron (Fe): Balance Applications: Best suited for dry ash, solid particulate flow, and mildly oxidizing environments in low-temperature superheater sections of boilers and industrial furnaces. Uses • Installed on LTSH tubes to protect from fly ash abrasion and soot erosion in power boilers • Shields return bends and tube banks in HRSGs and WHRBs exposed to turbulent flue gases • Used in biomass and coal-fired boilers to prevent mechanical wear and scaling on heat transfer tubes • Suitable for zones with high solid particle velocity and moderate corrosion risk • Effective in industrial and utility boilers that operate with abrasive fuels or in dry environments Features • High surface hardness – Excellent resistance to erosion, impact, and abrasion • Moderate oxidation resistance – Performs well in clean, oxidizing gas atmospheres • Precision fitment – Custom-shaped to match tube radius and curvature for secure shielding • Simple installation – Compatible with welding, clamping, or banding methods • Cost-efficient durability – Provides long service life in mechanical wear zones • Offered in varied lengths, thicknesses, and tube diameters based on application needs Applications • thermal power plants – Installed on LTSH tubes to minimize erosion and extend operational life • waste heat recovery units – Protects lower temperature coils from particulate-laden gas streams • coal-fired boilers – Shields convection sections exposed to ash and fly particles • steam generation systems – Guards heat transfer surfaces in dry, abrasive environments • biomass plants – Prevents wear from ash and unburned particulates in combustion zones Conclusion The SS 420 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers strong mechanical protection and erosion resistance for superheater and boiler tubes operating in low-temperature, abrasive environments. Designed for durability and precision fit, it enhances tube longevity and system performance in thermal applications where particulate damage is a concern. For product specifications, custom sizes, or technical assistance, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are designed to protect heat exchange surfaces such as boiler tubes, superheaters, and economizer coils from erosion, scaling, impact from ash particles, and flue gas corrosion. These shields are commonly applied in power plants, waste heat recovery boilers, and industrial heating systems to increase the service life of tubes and improve overall system reliability. Their semi-cylindrical shape ensures a snug fit over tube surfaces, especially in zones exposed to high-velocity gas flow or particulate matter. SS 410 Half Round Tube Shield for LTSH Tube The SS 410 Half Round Tube Shield is manufactured from martensitic stainless steel grade 410. This material offers high mechanical strength, moderate corrosion resistance, and excellent resistance to wear and oxidation in mildly corrosive and thermal environments. Specifically developed for Low Temperature Superheater (LTSH) applications, the SS 410 shield provides effective surface protection against soot, fly ash, and erosive gas streams where thermal and mechanical stresses are present. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 410 Half Round Tube Shields for LTSH applications, offering durable, cost-effective protection in thermal and industrial systems. Chemical Composition of SS 410 – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Suitable for low-temperature superheater zones exposed to fly ash erosion, oxidation, mechanical abrasion, and light corrosion. Uses • Installed on LTSH tube surfaces in power boilers to protect against particulate erosion and flue gas impact • Shields return bends and convection coils in HRSGs and WHRBs exposed to fluctuating gas temperatures • Used in process boilers and steam generators handling slightly corrosive or abrasive flue gases • Effective for dry ash and solid particulate protection in coal and biomass-fired units • Ideal for applications where wear resistance and moderate corrosion protection are critical Features • High mechanical strength – Withstands erosion, abrasion, and mechanical stress in high-flow zones • Moderate corrosion and oxidation resistance – Suitable for dry and mildly corrosive flue gas streams • Custom-fit – Fabricated to match the diameter, curvature, and layout of LTSH tubes • Easy installation – Compatible with weld-on, clamp-on, or banding installation methods • Cost-effective protection – Durable performance at an economical price point • Available in multiple lengths, thicknesses, and tube radii as per application needs Applications • thermal power plants – Protects LTSH tubes from fly ash impact and erosion in dry flue gas paths • waste heat recovery boilers – Applied in low-temperature return sections vulnerable to mechanical wear • steam generation systems – Shields superheater tubes operating in abrasive flue gas conditions • coal-fired boilers – Guards against slag and ash erosion in lower convection zones • process and utility boilers – Extends tube life in units operating with solid fuel combustion Conclusion The SS 410 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers reliable, abrasion-resistant protection for superheater and boiler tubes in low-temperature flue gas environments. With its excellent wear resistance and mechanical durability, it is a practical choice for enhancing system performance and reducing downtime in power and industrial boilers. For custom sizing, technical guidance, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-formed protective components used to shield boiler tubes, superheaters, and heat exchangers from erosion, scaling, ash impact, and corrosion. Commonly applied in power plants, waste heat recovery units, and industrial heating systems, these shields help prolong tube service life and maintain consistent thermal performance. Their half-round design ensures easy installation over exposed tube surfaces and provides dependable coverage in harsh gas flow zones. SS 310 Half Round Tube Shield for LTSH Tube The SS 310 Half Round Tube Shield is fabricated from high-temperature austenitic stainless steel grade 310. Known for its high chromium and nickel content, SS 310 offers excellent oxidation resistance, superior thermal stability, and strength under prolonged heat exposure. This makes it ideal for Low Temperature Superheater (LTSH) applications, where tubes are vulnerable to erosion, ash buildup, and gas-phase corrosion. The shield is precisely shaped to match the outer curvature of LTSH tubes, enabling effective surface protection in relatively low-temperature flue gas environments. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 310 Half Round Tube Shields for LTSH tubes, offering high-performance protection in demanding thermal conditions. Chemical Composition of SS 310 – Austenitic Stainless Steel • Carbon (C): ≤ 0.25% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Designed for low-temperature superheater zones and other areas with moderate heat and flue gas exposure, where oxidation resistance and strength are required. Uses • Installed on LTSH tubes to protect against soot erosion, scaling, and ash particle wear • Applied in convection zones of power boilers and economizers exposed to moderate heat and flue gases • Suitable for WHRBs and HRSGs where return tube surfaces are vulnerable to thermal degradation • Used in process heaters and chemical boilers operating under oxidizing conditions • Effective in gas-fired and coal-fired systems where moisture and ash corrosion is common Features • Excellent oxidation resistance – Performs well in oxidizing and mildly corrosive gas atmospheres • High-temperature strength – Resists deformation and scaling under continuous heat exposure • Custom-fit design – Precisely fabricated to match specific LTSH tube sizes and geometries • Easy installation – Can be attached using clamp-on, banding, or tack welding methods • Reduces maintenance – Protects high-wear areas from erosion and thermal stress • Available in various lengths, wall thicknesses, and radii per design requirements Applications • thermal power stations – Applied on LTSH tube surfaces to resist flue gas and ash-induced damage • waste heat recovery systems – Used in lower temperature zones of WHRBs to prevent erosion • petrochemical processing – Shields tube surfaces in heaters and exchangers from scaling • utility boilers – Protects steam superheater tubes in moderate heat and corrosive conditions • industrial steam systems – Enhances tube durability in superheaters and economizer banks Conclusion The SS 310 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a reliable, heat-resistant solution for protecting superheater tubes in flue gas environments with moderate temperatures. Its superior resistance to scaling, oxidation, and erosion makes it ideal for maintaining the efficiency and longevity of boiler systems operating in low-temperature zones. For custom sizes, specifications, or technical assistance, please contact Ladhani Metal Corporation.