QUALITU STANDARD MATERIAL NO. OLD DESIGNATION DC03 DIN EN 10130 1.0347 St 13-03 The deep drawing grade DC03 is specified according to the standard DIN EN 10130, which focuses on cold-rolled flat products made of soft steels for cold forming. This standard defines the technical requirements and test methods for cold-rolled products used in various industrial applications, particularly where high demands are placed on surface quality and mechanical properties. DC03 is a low-carbon steel characterized by excellent cold formability. The chemical composition of DC03 is precisely defined to ensure that the material has the required mechanical properties. Typically, DC03 contains a maximum of 0.10% carbon, a maximum of 0.45% manganese and traces of phosphorus and sulphur. This small amount of alloying elements contributes to the good formability and weldability of the steel. The mechanical properties of DC03 are also clearly defined. The material has a yield strength of at least 140 MPa and a tensile strength of between 270 and 370 MPa. In addition, DC03 has an elongation at break of at least 34%, which underlines its excellent formability. These properties make DC03 particularly suitable for the production of complex components that require high precision and surface quality, such as body parts in the automotive industry or household appliances. The DIN EN 10130 standard also specifies the tolerances for dimensions, shape and surface finish. These tolerances are crucial to ensure consistently high product quality and to meet the requirements of end users. The surface of the cold-rolled flat products can be supplied in various qualities, from matt to glossy, to meet the specific requirements of different applications. The DIN EN 10152 standard specifies electrolytically galvanized, cold-rolled flat steel products for cold forming, including the deep-drawing grade DC03. This standard defines the requirements for the zinc coating and the basic mechanical properties of the base material. DC03, when electrolytically galvanized in accordance with DIN EN 10152, is given an additional corrosion protection layer of zinc. This layer protects the material from oxidative influences and significantly increases the service life of the components made from it. The zinc coating can be applied in various thicknesses, depending on the specific requirements of the application. Typical coating thicknesses range from 5 to 20 µm. The chemical composition and mechanical properties of the base material DC03 remain unchanged after galvanizing and meet the requirements of DIN EN 10130. DC03 therefore retains its excellent cold formability and mechanical performance. The yield strength, tensile strength and elongation at break also remain in the same range as for ungalvanized DC03. In addition to mechanical performance, the quality of the zinc coating is of central importance. The DIN EN 10152 standard specifies the requirements for the uniformity of the coating, the adhesive strength of the zinc and the surface quality. These requirements ensure that the galvanized products offer high corrosion resistance and an aesthetically pleasing surface. The use of DC03 in accordance with DIN EN 10152 is widespread in the automotive industry, in the construction industry and in the manufacture of household appliances, where improved corrosion resistance is required in addition to high formability. Electrolytic galvanizing offers optimum protection here without impairing the excellent mechanical properties of the base material. In summary, it can be said that the deep-drawing grade DC03 offers a wide range of applications in accordance with both DIN EN 10130 and DIN EN 10152. While DIN EN 10130 focuses on high formability and surface quality, DIN EN 10152 supplements these properties with improved corrosion resistance thanks to the zinc coating. Both standards ensure that DC03 is a reliable and high-quality material for numerous industrial applications. Cold-rolled flat steel DC03, produced in accordance with the DIN EN 10130 and DIN EN 10152 standards, offers a number of advantages for applications in the cold forming process. While DIN EN 10130 defines the basic requirements for chemical composition, mechanical properties and surface quality, DIN EN 10152 extends these specifications to include specific conditions for electrolytically galvanized products that offer additional corrosion protection. Both standards together ensure that DC03 is a versatile material with high quality and durability.

Quality Standard Material No. Old designation DC01 DIN EN 10130 1.0330 ST 12-03 Cold-rolled flat steel DC01, according to the standards DIN EN 10130 and DIN EN 10152 Cold-rolled flat steel DC01 is a widely used material in the industrial sector, which is used for various applications in the cold forming process due to its excellent properties. The standards DIN EN 10130 and DIN EN 10152 are decisive for ensuring the quality and requirements of this material. DC01 according to the DIN EN 10130 standard The DIN EN 10130 standard defines the requirements for cold-rolled flat products made of unalloyed quality steels that are used in the cold forming process. Technical delivery conditions DIN EN 10130 specifies the technical delivery conditions for cold-rolled flat steel. These include the chemical composition, mechanical properties and surface quality. The standard ensures that the products supplied meet the required standards in order to guarantee workability and final quality. Chemical composition The chemical composition of the steel is decisive for its properties and is described in detail in DIN EN 10130. For DC01, the maximum carbon content is 0.12%, while the manganese and phosphorus content is also subject to specific limits. This composition ensures good cold formability and a high surface quality. Mechanical properties DC01 in accordance with DIN EN 10130 has specific mechanical properties that make it ideal for cold forming. These include a minimum tensile strength of 270-410 MPa and a minimum elongation of 28%. These properties allow the steel to be processed into complex shapes without cracking or breaking. Surface quality The surface quality is another aspect of DIN EN 10130. DC01 can be supplied in different surface finishes, such as smooth or matt. These variations allow adaptation to specific requirements of the end application, be it for decorative purposes or further coating processes. DC01+ZE according to the DIN EN 10152 standard The DIN EN 10152 standard extends the requirements of DIN EN 10130 to include specific conditions for electrolytically galvanized products. This standard is crucial for applications in which corrosion protection plays an important role. Technical delivery conditions DIN EN 10152 specifies the technical delivery conditions for electrolytically galvanized, cold-rolled flat products. In addition to the chemical composition and mechanical properties, these conditions also include the specific requirements for the zinc coating. Chemical composition and zinc coating The chemical composition of the base material DC01 generally remains unchanged, but an additional electrolytic zinc coating is applied. This coating is used for corrosion protection and varies in thickness depending on the specific requirements of the application. The standard provides detailed specifications for the thickness and uniformity of the zinc coating to ensure optimum protection. Mechanical properties Even with galvanized products, the mechanical properties of the base material are largely retained. The standard ensures that the cold formability and strength of the steel are not impaired despite the additional coating. Corrosion resistance and surface quality One of the main advantages of products manufactured in accordance with DIN EN 10152 is their improved corrosion resistance. Electrolytic galvanizing protects the steel from rust and thus increases the service life of the end product. The surface quality also plays a decisive role here and can be supplied in various finishes, such as smooth or textured. Conclusion Cold-rolled flat steel DC01, produced in accordance with the DIN EN 10130 and DIN EN 10152 standards, offers a number of advantages for applications in the cold forming process. While DIN EN 10130 defines the basic requirements for chemical composition, mechanical properties and surface quality, DIN EN 10152 extends these specifications to include specific conditions for electrolytically galvanized products that offer additional corrosion protection. Both standards together ensure that DC01 is a versatile material with high quality and durability. FOR EN 10130 DC01 CHEMICAL , MECHANICAL DATA SHEET KINDLY VISIT https://www.ladhanimetal.in/page/en-10130-2006-chemical-and-mechanical-composition/689c322d2e585e299cb43798 https://www.ladhanimetal.in/page/en-10130-cold-rolled-flat-sheet-plate-coil-data-sheet-equivalent-grade-and-chemical-and-mechanical-properties/68a45503fc14472bb274df32

Ladhani Metal Corporation offers SS 410 Half Round Tube Shields engineered to protect reheater (R/H) tubes in boilers, power plants, and industrial steam systems. Reheater tubes carry steam through the reheater section of the boiler, where the steam is reheated after partial expansion in the high-pressure turbine to enhance efficiency and prevent condensation. Made from martensitic stainless steel grade SS 410, these shields provide excellent resistance to oxidation, scaling, and moderate corrosion at elevated temperatures, while also delivering high mechanical strength and wear resistance. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in high-velocity and ash-laden zones Ladhani Metal Corporation manufactures, supplies, and exports SS 410 Half Round Tube Shields in multiple sizes, thicknesses, and diameters to meet the needs of domestic and international industries. SS 410 Grade Chemical Composition – Martensitic Stainless Steel • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.50 – 13.50% • Iron (Fe): Balance Applications: Ideal for reheater sections in thermal power plants, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs), particularly in environments where oxidation, scaling, and abrasive wear are prevalent. Uses • Protects reheater tubes against erosion, scaling, and oxidation • Shields R/H tubes exposed to abrasive flue gas particles • Extends service life of steam system components under thermal stress • Applicable in utility boilers, HRSGs, WHRBs, and petrochemical steam units Features • Good oxidation and scaling resistance at high temperatures • Strong mechanical properties with excellent wear resistance • Cost-effective stainless steel option for boiler protection • Precision-engineered half round fit for reliable tube coverage Applications • Power generation boilers – Reliable protection for reheater tubes under high stress • Waste heat recovery systems – Defense against flue gas erosion and scaling • Industrial steam boilers – Consistent performance under thermal cycling • Petrochemical plants – Effective in reheater sections with moderate corrosive exposure Conclusion The SS 410 Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation provides durable and cost-effective protection against erosion, scaling, and oxidation in high-temperature boiler environments. With excellent wear resistance and precision fit, these shields extend tube service life while reducing maintenance costs. Available in customized dimensions and export-ready specifications to meet global requirements. For technical assistance and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation offers 1Cr13 Boiler Half Round Tube Shields designed to provide robust protection for boiler and heat exchanger tubes operating in moderate temperature and mildly corrosive environments. Manufactured from martensitic stainless steel with a balanced chromium content, 1Cr13 offers good resistance to oxidation and corrosion, along with high mechanical strength and wear resistance. Its heat-treatable properties ensure excellent hardness and durability, making it suitable for extended service in demanding industrial conditions. They act as a protective layer against soot blower impact, abrasive flue gases, and particulate erosion, helping extend tube life and reduce maintenance frequency. Ladhani Metal Corporation manufactures, supplies, and exports 1Cr13 Boiler Half Round Tube Shields in a variety of sizes, lengths, and thicknesses to meet specific application requirements in both domestic and international markets. 1Cr13 Grade Chemical Composition – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.22% • Manganese (Mn): ≤ 0.60% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 0.60% • Chromium (Cr): 12.00 – 14.00% • Nickel (Ni): ≤ 0.60% • Iron (Fe): Balance Applications: Best suited for boiler tubes in environments where moderate oxidation resistance, good mechanical strength, and abrasion resistance are required. Uses • Shields straight boiler tubes in superheater and reheater sections • Protects against soot blower erosion and abrasive flue gas particles • Ideal for medium-temperature service conditions • Extends operational life of boiler tubes in industrial applications Features • Good oxidation and corrosion resistance – Suitable for moderate temperature use • High mechanical strength – Maintains structural integrity under operational stress • Wear resistant – Withstands abrasive and erosive boiler environments • Accurate fitment – Precision half-round design for secure tube coverage • Multiple installation options – Suitable for welding, clamping, or banding • Export ready – Manufactured to international quality specifications Applications • Power generation boilers – Protects superheater and reheater tube sections • Industrial steam boilers – Reduces wear from soot blowing and flue gas flow • Waste heat recovery units – Provides protection in moderate heat zones • Pulp, paper, and textile industries – Ensures tube longevity under abrasive conditions Conclusion The 1Cr13 Boiler Half Round Tube Shield from Ladhani Metal Corporation combines mechanical strength, wear resistance, and moderate oxidation protection for reliable boiler tube safeguarding. Precision-formed for secure installation and manufactured to meet export standards, these shields are an effective solution for extending tube service life in diverse industrial environments. For customized sizing and global supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield

Ladhani Metal Corporation offers 1Cr25Ni20Si2 Boiler Half Round Tube Shields engineered for superior protection of boiler tubes in extremely high-temperature and abrasive service environments. Manufactured from a heat-resistant austenitic stainless steel alloy with high chromium, nickel, and silicon content, 1Cr25Ni20Si2 delivers exceptional resistance to oxidation, carburization, and high-temperature scaling. The added silicon improves anti-oxidation properties and enhances structural stability during prolonged thermal exposure. These shields are precision-formed into a half-round profile to ensure accurate coverage of straight boiler tube sections. They provide a durable physical barrier against flue gas erosion, soot blower impact, and particle-laden gas flow, significantly extending the operational life of boiler tubes. Ladhani Metal Corporation manufactures, supplies, and exports 1Cr25Ni20Si2 Boiler Half Round Tube Shields in a wide range of sizes, thicknesses, and lengths, catering to both domestic and international markets. 1Cr25Ni20Si2 Grade Chemical Composition – Heat Resistant Austenitic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.50 – 2.50% • Chromium (Cr): 24.00 – 26.00% • Nickel (Ni): 19.00 – 22.00% • Iron (Fe): Balance Uses • Shields straight boiler tubes in superheaters, reheaters, and economizers • Protects against oxidation, scaling, and particulate erosion • Suitable for carburizing and high-silicon demanding environments • Extends tube life in power generation and process heating units Features • Enhanced oxidation resistance – Silicon addition boosts scale resistance at extreme temperatures • Superior thermal stability – Maintains mechanical integrity during prolonged heat exposure • Precision-engineered profile – Ensures a secure and accurate fit over boiler tubes • Flexible installation – Can be welded, clamped, or banded based on site requirements • Export-ready – Compliant with international quality and dimensional standards Applications • Thermal power stations – Protects superheater and reheater tubes from oxidation and erosion • Waste heat boilers – Guards tubes in severe heat recovery operations • Petrochemical and refinery heaters – Resists carburization in furnace conditions • Metallurgy and cement industries – Provides reliable tube protection under abrasive, high-heat gas flows Conclusion The 1Cr25Ni20Si2 Boiler Half Round Tube Shield from Ladhani Metal Corporation is designed for extreme service conditions where oxidation, scaling, and high-temperature wear are major concerns. With its silicon-enhanced heat-resistant alloy composition and precise manufacturing, it ensures prolonged boiler tube life and reduced downtime. Available in customized sizes for both domestic and export orders, these shields offer dependable performance in the world’s toughest boiler and furnace environments. For specifications and order inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield

Half Round Tube Shield Ladhani Metal Corporation offers SS 304 Half Round Straight Tube Shields engineered to protect straight sections of boiler and heat exchanger tubes from erosion, scaling, and high-temperature wear. These shields are installed over exposed tube surfaces to serve as a physical barrier against hot flue gases, fly ash, and other abrasive or corrosive elements present in thermal processing systems. The half-round design ensures close contact with the tube, providing effective protection and extended service life. SS 304 Half Round Straight Tube Shield The SS 304 Half Round Straight Tube Shield is designed for use in environments where straight tubes face constant exposure to high-temperature gases and particulate matter. SS 304 is an austenitic stainless steel with excellent corrosion resistance, high-temperature strength, and formability. These properties make it a preferred material for shielding straight tube sections in boilers, waste heat recovery systems, and steam reformers. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 304 Half Round Straight Tube Shields, offering precision-fabricated shielding components for various industrial thermal systems. Material Grade SS 304 – Austenitic Stainless Steel with high chromium and nickel content for enhanced corrosion resistance. Chemical Composition of SS 304 • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Iron (Fe): Balance Applications: Ideal for environments with exposure to steam, hot gases, and corrosive particles where durability and corrosion resistance are essential. Uses • Protection of straight tube sections in boilers and superheaters • Shielding tubes in economizers and HRSG systems • Applied in chemical heat exchangers and refinery heaters • Used in pulp and paper industry recovery boilers • Suited for marine and coastal power plants facing chloride exposure Features • Corrosion resistance – Excellent protection against oxidation, steam, and flue gas attack • Thermal durability – Withstands continuous exposure to elevated temperatures without deformation • Wear resistance – Shields tube surface from impact, erosion, and ash impingement • Custom fabrication – Tailored to tube size, wall thickness, and system layout • Secure installation – Easily mounted with clamps, welding, or stainless-steel banding • Cost-effective – Reduces maintenance frequency and extends tube life Applications • thermal power stations – Prevents tube thinning and cracking in straight sections exposed to ash-laden gas streams • chemical and petrochemical plants – Provides robust shielding for exchanger tubes in corrosive processing environments • waste heat recovery units – Enhances protection in systems where temperature fluctuation and gas velocity are high • industrial boilers – Ensures system reliability and energy efficiency by maintaining tube wall integrity • marine and offshore boilers – Protects tubes from saline steam and acidic corrosion Conclusion The SS 304 Half Round Straight Tube Shield from Ladhani Metal Corporation is a reliable and durable solution for shielding straight tube sections in demanding thermal applications. Manufactured from corrosion-resistant stainless steel and designed for easy installation, these shields provide lasting protection that enhances boiler performance and reduces maintenance downtime. For detailed specifications, custom sizes, or technical support, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to protect the surfaces of boiler tubes, superheaters, and heat exchanger coils from high-temperature corrosion, erosion, slag deposition, and scaling. Widely used in power generation, petrochemical, and industrial processing systems, these shields are fabricated with a half-round profile that allows quick installation over curved or straight tube surfaces, extending service life and minimizing repair and replacement needs. Cr23Ni13 U Type Inner Half Round Tube Shield The Cr23Ni13 U Type Inner Half Round Tube Shield is manufactured from a chromium-nickel austenitic alloy known for its excellent high-temperature resistance, structural stability, and corrosion resistance. It performs reliably under continuous thermal exposure and is well-suited for systems exposed to oxidizing, carburizing, and sulfur-rich gases. The inner U-type configuration is designed specifically to shield the inner arc of U-bend tubes, which are more susceptible to localized turbulence, thermal fatigue, and scale formation. • Inner U Type Half Round Tube Shield – Covers the internal curvature of U-bend tubes, providing targeted protection from flue gas erosion, thermal scaling, and corrosion. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of Cr23Ni13 U Type Inner Half Round Tube Shields, offering precision-engineered solutions for high-performance thermal and chemical systems. Chemical Composition of Cr23Ni13 – Austenitic Heat-Resistant Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 22.0 – 24.0% • Nickel (Ni): 12.0 – 14.0% • Iron (Fe): Balance Applications: Suitable for continuous exposure to high temperatures in oxidizing and chemically aggressive environments. Ideal for inner bend protection in return coil systems subjected to high thermal load and corrosive gas flow. Uses • Protects inner arcs of U-bend tubes in thermal power plant superheaters, reheaters, and economizers • Installed in WHRBs and HRSGs to resist scale and slag in return bends exposed to flue gas turbulence • Applied in steam reformers, process furnaces, and heat exchangers where inner tube surfaces face corrosive and hot gas impact • Used in chemical reactors and cracking units operating under cyclic thermal and chemical stress • Suitable for long-term protection of curved tubes in industrial combustion and heating equipment Features • High-temperature oxidation resistance – Performs in continuous service above 1000°C • Inner arc shielding – Targets protection for the most erosion-prone and heat-stressed tube area • Corrosion resistance – Withstands exposure to sulfur-rich gases, acidic vapors, and flue gas byproducts • Fabricated to specification – Available in custom sizes and bend radii for a precise fit and stable coverage • Simple installation – Can be secured using clamping, banding, or welding without disrupting the system • Extended service life – Reduces risk of tube failure, minimizes maintenance downtime, and improves system efficiency Applications • thermal and power generation – Protects inner U-bend surfaces from corrosion and erosion in steam circuits • petrochemical processing – Shields return bends in reformers and exchangers from hot process gases • waste heat recovery – Used in curved tubes of WHRBs and HRSGs for inner arc scale protection • chemical industry – Applied in reactors and thermal systems subjected to chemical vapors and high heat • furnace and incineration systems – Effective in resisting slag and gas-induced wear in industrial burners Conclusion The Cr23Ni13 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers dependable inner arc protection for U-bend tubes operating in aggressive thermal and chemical environments. Its high-temperature and corrosion-resistant properties make it ideal for safeguarding critical process tubes across a range of high-performance industrial systems. For technical consultation, customized fabrication, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components designed to protect boiler tubes, superheaters, and heat exchanger coils from erosion, scaling, high-temperature oxidation, and mechanical wear. These shields are widely used in thermal power plants, petrochemical systems, and process industries where tubes are exposed to harsh operating conditions such as high-velocity flue gases, slag, and thermal cycling. Their semi-cylindrical shape allows for easy installation over both straight and curved tube surfaces without system disassembly. SS 410 U Type Inner Half Round Tube Shield The SS 410 U Type Inner Half Round Tube Shield is manufactured from martensitic stainless steel grade 410, which offers good corrosion resistance, excellent wear resistance, and moderate high-temperature strength. The inner U-type design is specifically configured to cover the internal arc of U-bend tubes, an area especially prone to erosion caused by turbulence, thermal gradients, and high-velocity gas impingement. SS 410 provides a hard, durable barrier against mechanical and thermal stress in industrial heat transfer equipment. • Inner U Type Half Round Tube Shield – Protects the internal bend of U-bend tubes from erosion, slag buildup, and high-temperature wear. Ladhani Metal Corporation is a dependable manufacturer, supplier, and exporter of SS 410 U Type Inner Half Round Tube Shields, offering cost-effective and durable protection solutions for critical tube components in high-temperature service environments. Chemical Composition of SS 410 – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Best suited for moderate to high-temperature environments where abrasion resistance, mechanical strength, and oxidation resistance are important. Uses • Inner arc shielding of U-bend tubes in power plant boilers and superheaters exposed to flue gas turbulence • Protection of return bends in WHRBs and HRSGs where scaling and erosion are common • Applied in curved tube sections in steam reformers, furnaces, and heat exchangers • Ideal for use in chemical, cement, and metallurgical plants with abrasive flue gas and slag exposure • Suitable for systems requiring enhanced wear resistance under cyclic thermal loading Features • Good high-temperature oxidation resistance – Performs well in oxidizing atmospheres up to 650°C • Inner bend protection – Focused coverage for the area most affected by turbulent gas flow and erosion • Wear resistance – Offers excellent surface hardness and mechanical strength for long-term use • Secure fit – Custom-manufactured to match the tube’s radius and diameter for effective shielding • Quick installation – Can be fixed using clamp-on, banding, or welding techniques depending on system requirements • Cost-effective performance – Provides a durable and affordable solution for erosion and heat protection Applications • thermal power plants – Shields inner U-bends in boiler and superheater sections from erosion and slag impact • waste heat recovery systems – Used in WHRBs and HRSGs to protect internal tube arcs from scale and corrosion • petrochemical facilities – Installed in curved tube coils and return bends exposed to acidic and abrasive gas streams • industrial furnaces and reformers – Suitable for inner arc coverage in high-temperature gas flow zones • cement and chemical plants – Defends against mechanical wear and heat stress in return tube bends Conclusion The SS 410 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a durable and cost-efficient solution for shielding the inner arc of U-bend tubes in thermally and mechanically demanding environments. Its martensitic structure and wear-resistant properties make it a reliable choice for protecting tube surfaces from erosion, scaling, and heat-induced damage in power and process applications. For custom orders, technical support, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are specially designed components used to protect boiler and heat exchanger tubes from erosion, wear, and high-temperature damage. Manufactured with precision and expertise, these shields ensure enhanced tube life, reduced maintenance, and efficient operation in demanding industrial environments. SS 304 Half Round Tube Shield The SS 304 Half Round Tube Shield is a semi-circular protective cover made from high-quality stainless steel grade 304. It is widely used in thermal and mechanical systems where tube surfaces are exposed to harsh operating conditions. The half-round design allows for easy installation over the tubes while providing robust protection against flue gases, abrasives, and thermal stress. Chemical Composition of SS 304 – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Iron (Fe): Balance Applications: Widely used in boilers, heat exchangers, steam lines, and furnaces due to its excellent corrosion resistance, oxidation resistance, and durability in high-temperature environments. Uses Half Round Tube Shields are essential components in a wide range of thermal and mechanical systems. Their primary function is to protect exposed tube surfaces from damage caused by high-temperature operations, abrasive flow, and chemical environments. Common uses include: Boiler tube protection in thermal and power plants, where shields guard against ash erosion, slagging, and flame impingement. Shielding heat exchanger tubes from erosion and corrosion caused by turbulent gas flow and aggressive operating media. Preventing mechanical wear from high-velocity gas flow in furnace and combustion systems, especially in radiant heat zones. Providing long-term protection for high-temperature tubing in petrochemical and refinery systems, helping to reduce downtime and costly tube replacements. These shields serve as a barrier between the harsh environment and the structural tube surface, thereby improving operational safety, minimizing maintenance, and extending the service life of critical equipment. Features Ladhani Metal Corporation designs and manufactures Half Round Tube Shields with features that ensure long-term reliability, precise fit, and consistent performance even in the most challenging environments: Material: Made from high-grade stainless steel 304, offering excellent resistance to corrosion, oxidation, and heat-related stress. Design: Formed into a precise half-round shape to ensure full coverage and a secure fit over the outer curvature of tubes. Finish: Available in bright annealed, pickled & passivated, or other surface finishes as per client requirements for enhanced surface integrity and aesthetic appeal. Durability: Built with strong mechanical properties to withstand erosion, impact, and thermal cycling over prolonged use. Custom Sizes: Manufactured in a variety of thicknesses, lengths, and diameters to match specific tube dimensions and installation needs. Applications: Thermal Power Stations, where boiler tubes are continuously exposed to high heat and fly ash. Refineries and Petrochemical Plants, where process gases and liquids can be corrosive and erosive. Heat Recovery Steam Generators (HRSGs), where shields protect tubes during the waste heat recovery process. Chemical Processing Units, where exposure to reactive media necessitates strong material protection. Pulp and Paper Industry, particularly in recovery boilers and steam-generating systems. Industrial Boilers and Steam Systems that require reliable tube integrity for safe and efficient operation. These shields are critical to maintaining the integrity and efficiency of equipment in heavy-duty industrial systems. Conclusion The SS 304 Half Round Tube Shield by Ladhani Metal Corporation is a trusted solution for protecting vital tube systems in aggressive and high-temperature environments. Engineered for performance and longevity, these shields not only extend the life of your tubing systems but also minimize downtime and maintenance costs. With customizable dimensions, superior raw material, and precision forming, Ladhani Metal Corporation stands as a dependable partner for all your tube protection requirements. For more details, inquiries, or to request a quote, please contact Ladhani Metal Corporation.